Detection and mapping of specular surfaces using multibounce LiDAR returns.

We propose methods that use specular, multibounce LiDAR returns to detect and map specular surfaces that might be invisible to conventional LiDAR systems that rely on direct, single-scatter returns. We derive expressions that relate the time- and angle-of-arrival of these multibounce returns to scattering points on the specular surface, and then use these expressions to formulate techniques for retrieving specular surface geometry when the scene is scanned by a single beam or illuminated with a multi-beam flash. We also consider the special case of transparent specular surfaces, for which surface reflections can be mixed together with light that scatters off of objects lying behind the surface.

Room-Temperature Midwavelength Infrared InAsSb Nanowire Photodetector Arrays with Al2O3 Passivation.

Developing uncooled photodetectors at midwavelength infrared (MWIR) is critical for various applications including remote sensing, heat seeking, spectroscopy, and more. In this study, we demonstrate room-temperature operation of nanowire-based photodetectors at MWIR composed of vertical selective-area InAsSb nanowire photoabsorber arrays on large bandgap InP substrate with nanoscale plasmonic gratings. We accomplish this by significantly suppressing the nonradiative recombination at the InAsSb nanowire surfaces by introducing ex situ conformal Al2O3 passivation shells. Transient simulations estimate an extremely low surface recombination velocity on the order of 103 cm/s. We further achieve room-temperature photoluminescence emission from InAsSb nanowires, spanning the entire MWIR regime from 3 to 5 µm. A dry-etching process is developed to expose only the top nanowire facets for metal contacts, with the sidewalls conformally covered by Al2O3 shells, allowing for a higher internal quantum efficiency. Based on these techniques, we fabricate nanowire photodetectors with an optimized pitch and diameter and demonstrate room-temperature spectral response with MWIR detection signatures up to 3.4 µm. The results of this work indicate that uncooled focal plane arrays at MWIR on low-cost InP substrates can be designed with nanostructured absorbers for highly compact and fully integrated detection platforms.

Feasibility of achieving high detectivity at short- and mid-wavelength infrared using nanowire-plasmonic photodetectors with p-n heterojunctions.

Photodetection at short- and mid-wavelength infrared (SWIR and MWIR) enables various sensing systems used in heat seeking, night vision, and spectroscopy. As a result, uncooled photodetection at these wavelengths is in high demand. However, these SWIR and MWIR photodetectors often suffer from high dark current, causing them to require bulky cooling accessories for operation. In this study, we argue for the feasibility of improving the room-temperature detectivity by significantly suppressing dark current. To realize this, we propose using (1) a nanowire-based platform to reduce the photoabsorber volume, which in turn reduces trap state population and hence generation-recombination current, and (2) p-n heterojunctions to prevent minority carrier diffusion from the large bandgap substrate into the nanowire absorber. We prove these concepts by demonstrating a comprehensive three-dimensional photoresponse model to explore the level of detectivity offered by vertical InAs(Sb) nanowire photodetector arrays with self-assembled plasmonic gratings. The resultant electrical simulations show that the dark current can be reduced by three to four orders at room temperature, leading to a peak detectivity greater than 3.5 × 1010 cm Hz1/2 W-1 within the wavelength regime of 2.0-3.4 µm, making it comparable to the best commercial and research InAs p-i-n homojunction photodiodes. In addition, we show that the plasmonic resonance peaks can be easily tuned by simply varying the exposed nanowire height. Finally, we investigate the impact of nanowire material properties, such as carrier mobility and carrier lifetime, on the nanowire photodetector detectivity. This work provides a roadmap for the electrical design of nanowire optoelectronic devices and stimulates further experimental validation for uncooled photodetectors at SWIR and MWIR.

Uncooled Photodetector at Short-Wavelength Infrared Using InAs Nanowire Photoabsorbers on InP with p- n Heterojunctions.

In this work, we demonstrate an InAs nanowire photodetector at short-wavelength infrared (SWIR) composed of vertically oriented selective-area InAs nanowire photoabsorber arrays on InP substrates, forming InAs-InP heterojunctions. We measure a rectification ratio greater than 300 at room temperature, which indicates a desirable diode performance. The dark current density, normalized to the area of nanowire heterojunctions, is 130 mA/cm2 at a temperature of 300 K and a reverse bias of 0.5 V, making it comparable to the state-of-the-art bulk InAs p- i- n photodiodes. An analysis of the Arrhenius plot of the dark current at reverse bias yields an activation energy of 175 meV from 190 to 300 K, suggesting that the Shockley-Read-Hall (SRH) nonradiative current is the primary contributor to the dark current. By using three-dimensional electrical simulations, we determine that the SRH nonradiative current originates from the acceptor-like surface traps at the nanowire-passivation heterointerfaces. The spectral response at room temperature is also measured, with a clear photodetection signature observed at wavelengths up to 2.5 µm. This study provides an understanding of dark current for small band gap selective-area nanowires and paves the way to integrate these improved nanostructured photoabsorbers on large band gap substrates for high-performance photodetectors at SWIR.

A three-dimensional insight into correlation between carrier lifetime and surface recombination velocity for nanowires.

The performance of nanowire-based devices is predominantly affected by nonradiative recombination on their surfaces, or sidewalls, due to large surface-to-volume ratios. A common approach to quantitatively characterize surface recombination is to implement time-resolved photoluminescence to correlate surface recombination velocity with measured minority carrier lifetime by a conventional analytical equation. However, after using numerical simulations based on a three-dimensional (3D) transient model, we assert that the correlation between minority carrier lifetime and surface recombination velocity is dependent on a more complex combination of factors, including nanowire geometry, energy-band alignment, and spatial carrier diffusion in 3D. To demonstrate this assertion, we use three cases-GaAs nanowires, InGaAs nanowires, and InGaAs inserts embedded in GaAs nanowires-and numerically calculate the carrier lifetimes by varying the surface recombination velocities. Using this information, we then investigate the intrinsic carrier dynamics within those 3D structures. We argue that the conventional analytical approach to determining surface recombination in nanowires is of limited applicability, and that a comprehensive computation in 3D can provide more accurate analysis. Our study provides a solid theoretical foundation to further understand surface characteristics and carrier dynamics for 3D nanostructured materials.