Decorating the Node of a Zirconium-Based Metal-Organic Framework to Tune Adsorption Behavior and Surface Permeation.

Surface barriers are commonly observed in nanoporous materials. Although researchers have explored methods to repair defects or create flawless crystals to mitigate surface barriers, these approaches may not always be practical or readily achievable in targeted metal-organic frameworks (MOFs). In our study, we propose an alternative approach focusing on the introduction of diverse ligands onto a MOF-808 node to finely adjust its adsorption and mass transport characteristics. Significantly, our findings indicate that while adsorption curves can be inferred based on the MOF's chemical composition and the probing molecule, surface permeabilities exhibit variations dependent on the specific probe utilized and the incorporated ligand. Our investigation, considering van der Waals forces exclusively between the adsorbate (e.g., n-hexane, propane, and benzene) and the adsorbent, revealed that augmenting these interactions can indeed improve surface permeation to a certain extent. Conversely, strong adsorption resulting from hydrogen bonding interactions, particularly with water in modified MOFs, led to compromised permeation within the MOF crystals. These outcomes provide valuable insights for the porous materials community and offer guidance in the development of adsorbents with enhanced affinity and superior mass transport properties for gases and vapors.

Measuring Mass Transfer of n-Hexane and 2-Chloroethyl Ethyl Sulfide in Sorbent/Polymer Fiber Composites Using a Volumetric Adsorption Apparatus.

The integration of metal-organic frameworks (MOFs) into composite systems serves as an effective strategy to increase the processability of these materials. Notably, MOF/fiber composites have shown much promise as protective equipment for the capture and remediation of chemical warfare agents. However, the practical application of these composites requires an understanding of their mass transport properties, as both mass transfer resistance at the surface and diffusion within the materials can impact the efficacy of these materials. In this work, we synthesized composite fibers of MOF-808 and amidoxime-functionalized polymers of intrinsic microporosity (PIM-1-AX) and measured the adsorption and mass transport behavior of n-hexane and 2-chloroethyl ethyl sulfide (CEES), a sulfur mustard simulant. We developed a new Fickian diffusion model for cylindrical shapes to fit the dynamic adsorption data obtained from a commercial volumetric adsorption apparatus and found that mass transport behavior in composite fibers closely resembled that in the pure PIM fibers, regardless of MOF loading. Moreover, we found that n-hexane adsorption mirrors that of CEES, indicating that it could be used as a structural mimic for future adsorption studies of the sulfur mustard simulant. These preliminary insights and the new model introduced in this work lay the groundwork for the design of next-generation composite materials for practical applications.

Precise Modulation of CO2 Sorption in Ti8Ce2-Oxo Clusters: Elucidating Lewis Acidity of the Ce Metal Sites and Structural Flexibility.

Investigating the structure-property correlation in porous materials is a fundamental and consistent focus in various scientific domains, especially within sorption research. Metal oxide clusters with capping ligands, characterized by intrinsic cavities formed through specific solid-state packing, demonstrate significant potential as versatile platforms for sorption investigations due to their precisely tunable atomic structures and inherent long-range order. This study presents a series of Ti8Ce2-oxo clusters with subtle variations in coordinated linkers and explores their sorption behavior. Notably, Ti8Ce2-BA (BA denotes benzoic acid) manifests a distinctive two-step profile during the CO2 adsorption, accompanied by a hysteresis loop. This observation marks a new instance within the metal oxide cluster field. Of intrigue, the presence of unsaturated Ce(IV) sites was found to be correlated with the stepped sorption property. Moreover, the introduction of an electrophilic fluorine atom, positioned ortho or para to the benzoic acid, facilitated precise control over gate pressure and stepped sorption quantities. Advanced in situ techniques systematically unraveled the underlying mechanism behind this unique sorption behavior. The findings elucidate that robust Lewis base-acid interactions are established between the CO2 molecules and Ce ions, consequently altering the conformation of coordinated linkers. Conversely, the F atoms primarily contribute to gate pressure variation by influencing the Lewis acidity of the Ce sites. This research advances the understanding in fabricating metal-oxo clusters with structural flexibility and provides profound insights into their host-guest interaction motifs. These insights hold substantial promise across diverse fields and offer valuable guidance for future adsorbent designs grounded in fundamental theories of structure-property relationships.

Topical application of synthetic melanin promotes tissue repair.

In acute skin injury, healing is impaired by the excessive release of reactive oxygen species (ROS). Melanin, an efficient scavenger of radical species in the skin, performs a key role in ROS scavenging in response to UV radiation and is upregulated in response to toxic insult. In a chemical injury model in mice, we demonstrate that the topical application of synthetic melanin particles (SMPs) significantly decreases edema, reduces eschar detachment time, and increases the rate of wound area reduction compared to vehicle controls. Furthermore, these results were replicated in a UV-injury model. Immune array analysis shows downregulated gene expression in apoptotic and inflammatory signaling pathways consistent with histological reduction in apoptosis. Mechanistically, synthetic melanin intervention increases superoxide dismutase (SOD) activity, decreases Mmp9 expression, and suppresses ERK1/2 phosphorylation. Furthermore, we observed that the application of SMPs caused increased populations of anti-inflammatory immune cells to accumulate in the skin, mirroring their decrease from splenic populations. To enhance antioxidant capacity, an engineered biomimetic High Surface Area SMP was deployed, exhibiting increased wound healing efficiency. Finally, in human skin explants, SMP intervention significantly decreased the damage caused by chemical injury. Therefore, SMPs are promising and effective candidates as topical therapies for accelerated wound healing, including via pathways validated in human skin.

Investigating the mechanical stability of flexible metal-organic frameworks.

As we continue to develop metal-organic frameworks (MOFs) for potential industrial applications, it becomes increasingly imperative to understand their mechanical stability. Notably, amongst flexible MOFs, structure-property relationships regarding their compressibility under pressure remain unclear. In this work, we conducted in situ variable pressure powder X-ray diffraction (PXRD) measurements up to moderate pressures (<1 GPa) using a synchrotron source on two families of flexible MOFs: (i) NU-1400 and NU-1401, and (ii) MIL-88B, MIL-88B-(CH3)2, and MIL-88B-(CH3)4. In this project scope, we found a positive correlation between bulk moduli and degree of flexibility, where increased rigidity (e.g., smaller swelling or breathing amplitude) arising from steric hindrance was deleterious, and observed reversibility in the unit cell compression of these MOFs. This study serves as a primer for the community to begin to untangle the factors that engender flexible frameworks with mechanical resilience.

Rationally Tailored Mesoporous Hosts for Optimal Protein Encapsulation.

Proteins play important roles in the therapeutic, medical diagnostic, and chemical catalysis industries. However, their potential is often limited by their fragile and dynamic nature outside cellular environments. The encapsulation of proteins in solid materials has been widely pursued as a route to enhance their stability and ease of handling. Nevertheless, the experimental investigation of protein interactions with rationally designed synthetic hosts still represents an area in need of improvement. In this work, we leveraged the tunability and crystallinity of metal-organic frameworks (MOFs) and developed a series of crystallographically defined protein hosts with varying chemical properties. Through systematic studies, we identified the dominating mechanisms for protein encapsulation and developed a host material with well-tailored properties to effectively encapsulate the protein ubiquitin. Specifically, in our mesoporous hosts, we found that ubiquitin encapsulation is thermodynamically favored. A more hydrophilic encapsulation environment with favorable electrostatic interactions induces enthalpically favored ubiquitin-MOF interactions, and a higher pH condition reduces the intraparticle diffusion barrier, both leading to a higher protein loading. Our findings provide a fundamental understanding of host-guest interactions between proteins and solid matrices and offer new insights to guide the design of future protein host materials to achieve optimal protein loading. The MOF modification technique used in this work also demonstrates a facile method to develop materials easily customizable for encapsulating proteins with different surface properties.

Survival of Zirconium-Based Metal-Organic Framework Crystallinity at Extreme Pressures.

Recent research on metal-organic frameworks (MOFs) has shown a shift from considering only the crystalline high-porosity phases to exploring their amorphous counterparts. Applying pressure to a crystalline MOF is a common method of amorphization, as MOFs contain large void spaces that can collapse, reducing the accessible surface area. This can be either a desired change or indeed an unwanted side effect of the application of pressure. In either case, understanding the MOF's pressure response is extremely important. Three such MOFs with varying pore sizes (UiO-66, MOF-808, and NU-1000) were investigated using in situ high-pressure X-ray diffraction and Raman spectroscopy. Partial crystallinity was observed in all three MOFs above 10 GPa, along with some recovery of crystallinity on return to ambient conditions if the frameworks were not compressed above thresholds of 13.3, 14.2, and 12.3 GPa for UiO-66, MOF-808, and NU-1000, respectively. This threshold was marked by an unexpected increase in one or more lattice parameters with pressure in all MOFs. Comparison of compressibility between MOFs suggests penetration of the pressure-transmitting oil into MOF-808 and NU-1000. The survival of some crystallinity above 10 GPa in all of these MOFs despite their differing pore sizes and extents of oil penetration demonstrates the importance of high-pressure characterization of known structures.

Back to the Basics: Developing Advanced Metal-Organic Frameworks Using Fundamental Chemistry Concepts.

Over the past 25 years, metal-organic frameworks (MOFs) have developed into an increasingly intricate class of crystalline porous materials in which the choice of building blocks offers significant control over the physical properties of the resulting material. Despite this complexity, fundamental coordination chemistry design principles provided a strategic basis to design highly stable MOF structures. In this Perspective, we provide an overview of these design strategies and discuss how researchers leverage fundamental chemistry concepts to tune reaction parameters and synthesize highly crystalline MOFs. We then discuss these design principles in the context of several literature examples, highlighting both relevant fundamental chemistry principles and additional design principles required to access stable MOF structures. Finally, we envision how these fundamental concepts may offer access to even more advanced structures with tailored properties as the MOF field looks toward the future.

Engineering Metal-Organic Frameworks for Selective Separation of Hexane Isomers Using 3-Dimensional Linkers.

Metal-organic frameworks (MOFs) are highly tunable materials with potential for use as porous media in non-thermal adsorption or membrane-based separations. However, many separations target molecules with sub-angstrom differences in size, requiring precise control over the pore size. Herein, we demonstrate that this precise control can be achieved by installing a three-dimensional linker in an MOF with one-dimensional channels. Specifically, we synthesized single crystals and bulk powder of NU-2002, an isostructural framework to MIL-53 with bicyclo[1.1.1]pentane-1,3-dicarboxylic acid as the organic linker component. Using variable-temperature X-ray diffraction studies, we show that increasing linker dimensionality limits structural breathing relative to MIL-53. Furthermore, single-component adsorption isotherms demonstrate the efficacy of this material for separating hexane isomers based on the different sizes and shapes of these isomers.

Reticular Design of Precise Linker Installation into a Zirconium Metal-Organic Framework to Reinforce Hydrolytic Stability.

Reticular chemistry allows for the rational assembly of metal-organic frameworks (MOFs) with designed structures and desirable functionalities for advanced applications. However, it remains challenging to construct multi-component MOFs with unprecedented complexity and control through insertion of secondary or ternary linkers. Herein, we demonstrate that a Zr-based MOF, NU-600 with a (4,6)-connected she topology, has been judiciously selected to employ a linker installation strategy to precisely insert two linear linkers with different lengths into two crystallographically distinct pockets in a one-pot, de novo reaction. We reveal that the hydrolytic stability of these linker-inserted MOFs can be remarkably reinforced by increasing the Zr6 node connectivity, while maintaining comparable water uptake capacity and pore-filling pressure as the pristine NU-600. Furthermore, introducing hydrophilic -OH groups into the linear linker backbones to construct multivariate MOFs can effectively shift the pore-filling step to lower partial pressures. This methodology demonstrates a powerful strategy to reinforce the structural stability of other MOF frameworks by increasing the connectivity of metal nodes, capable of encouraging developments in fundamental sciences and practical applications.

Tröger's Base Chemistry in Solution and in Zr(IV)-Based Metal-Organic Frameworks.

Tröger's base (TB) and its derivatives have been studied extensively due to their unique concave shape stemming from the endomethylene strap. However, the strap-clipped TB chemistry has been largely overlooked in metal-organic framework (MOF) solids, leading to a gap in our knowledge within this field. In this work, we report the in situ strap elimination of a carboxylate-carrying TB in the presence of formic acid, both in solution and in Zr(IV)-based MOFs. In the solution system, the methanodiazocine nucleus can be exclusively transformed into an N,N'-diformyl-decorated phenhomazine derivative, regardless of the solvent used (DMF, DMA, or DEF), as unambiguously uncovered by single crystal X-ray crystallography. In contrast, while in the MOF synthetic system, the degree of derivatization reaction can be effectively controlled to give either the secondary diamine or formyl-decorated diamine, depending on the solvent used (DMF or DEF), resulting in the formation of two Zr-MOFs with 8-connected bcu (NU-1900) and 12-connected fcu (NU-407) topologies, respectively. The derivatization mechanism is proposed to be topology-guided and dependent on the local acid concentration during the MOF formation processes. Moreover, we discovered a novel post-synthetically water-induced in situ linker formylation process in NU-1900 through sequential formic acid elimination, migration, and condensation processes, affording an isostructural framework with the same linker as in NU-407, which further corroborates our proposed mechanism. Additionally, the highly defective NU-1900 with abundant accessible Zr sites was demonstrated to be an outstanding catalyst for the detoxification of a nerve agent simulant with a half-life of less than 1 min.

Hydrophobic Melanin via Post-Synthetic Modification for Controlled Self-Assembly.

Allomelanin is a class of nitrogen-free melanin mostly found in fungi and, like all naturally occurring melanins, is hydrophilic. Herein, we develop a facile method to modify synthetic hydrophilic allomelanin to yield hydrophobic derivatives through post-synthetic modifications. Amine-functionalized molecules of various kinds can be conjugated to allomelanin nanoparticles under mild conditions with high loading efficiencies. Hydrophobicity is conferred by introducing amine-terminated alkyl groups with different chain lengths. We demonstrate that the resulting hydrophobic allomelanin nanoparticles undergo air/water interfacial self-assembly in a controlled fashion, which enables the generation of large-scale and uniform structural colors. This work provides an efficient and tunable surface chemistry modification strategy to broaden the scope of synthetic melanin structure and function beyond the known diversity found in nature.

Influence of Pore Size on Hydrocarbon Transport in Isostructural Metal-Organic Framework Crystallites.

Hydrocarbon separations using porous materials such as metal-organic frameworks (MOFs) have been proposed to reduce the energy demands associated with current distillation-based methods. Despite the potential of these materials to distinguish hydrocarbons through thermodynamic or kinetic mechanisms, experimental data quantifying hydrocarbon transport in MOFs is lacking. Such mass transfer measurements are vital to elucidate structure-property relationships and design future high-performing separation materials. In this work, we aim to isolate the influence of pore size on hydrocarbon diffusion by studying a pair of isoreticular MOFs, Co2Cl2BBTA and Co2Cl2BTDD. We use a volumetric method to extract mass transport coefficients for six hydrocarbon probe molecules of varying size and chemical functionality. From these nonequilibrium mass transport measurements, we determine the rate-limiting diffusion mechanism and identify trends in hydrocarbon surface permeabilities in the MOFs based on pore size, hydrocarbon chain length, and temperature.

Sulfated Zirconium Metal-Organic Frameworks as Well-Defined Supports for Enhancing Organometallic Catalysis.

Understanding heterogeneous catalysts is a challenging pursuit due to surface site nonuniformity and aperiodicity in traditionally used materials. One example is sulfated metal oxides, which function as highly active catalysts and as supports for organometallic complexes. These applications are due to traits such as acidity, ability to act as a weakly coordinating ligand, and aptitude for promoting transformations via radical cation intermediates. Research is ongoing about the structural features of sulfated metal oxides that imbue the aforementioned properties, such as sulfate geometry and coordination. To better understand these materials, metal-organic frameworks (MOFs) have been targeted as structurally defined analogues. Composed of inorganic nodes and organic linkers, MOFs possess features such as high porosity and crystallinity, which make them attractive for mechanistic studies of heterogeneous catalysts. In this work, Zr6-based MOF NU-1000 is sulfated and characterized using techniques such as single crystal X-ray diffraction in addition to diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS). The dynamic nature of the sulfate binding motif is found to transition from monodentate, to bidentate, to tridentate depending on the degree of hydration, as supported by density functional theory (DFT) calculations. Heightened Brønsted acidity compared to the parent MOF was observed upon sulfation and probed through trimethylphosphine oxide physisorption, ammonia sorption, in situ ammonia DRIFTS, and DFT studies. With the support structure benchmarked, an organoiridium complex was chemisorbed onto the sulfated MOF node, and the efficacy of this supported catalyst was demonstrated for stoichiometric and catalytic activation of benzene-d6 and toluene with structure-activity relationships derived.

Interfacial Unit-Dependent Catalytic Activity for CO Oxidation over Cerium Oxysulfate Cluster Assemblies.

Atomically precise cerium oxo clusters offer a platform to investigate structure-property relationships that are much more complex in the ill-defined bulk material cerium dioxide. We investigated the activity of the MCe70 torus family (M = Cd, Ce, Co, Cu, Fe, Ni, and Zn), a family of discrete oxysulfate-based Ce70 rings linked by monomeric cation units, for CO oxidation. CuCe70 emerged as the best performing MCe70 catalyst among those tested, prompting our exploration of the role of the interfacial unit on catalytic activity. Temperature-programmed reduction (TPR) studies of the catalysts indicated a lower temperature reduction in CuCe70 as compared to CeCe70. In situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) indicated that CuCe70 exhibited a faster formation of Ce3+ and contained CO bridging sites absent in CeCe70. Isothermal CO adsorption measurements demonstrated a greater uptake of CO by CuCe70 as compared to CeCe70. The calculated energies for the formation of a single oxygen defect in the structure significantly decreased with the presence of Cu at the linkage site as opposed to Ce. This study revealed that atomic-level changes in the interfacial unit can change the reducibility, CO binding/uptake, and oxygen vacancy defect formation energetics in the MCe70 family to thus tune their catalytic activity.

Leveraging Isothermal Titration Calorimetry to Obtain Thermodynamic Insights into the Binding Behavior and Formation of Metal-Organic Frameworks.

Isothermal titration calorimetry (ITC) is a technique which directly measures the thermodynamic parameters of binding events. Although historically it has been used to investigate interactions in biological macromolecules and the kinetics of enzyme-catalyzed reactions, ITC has also been demonstrated to provide relevant thermodynamic information about interactions in synthetic systems, such as those in metal-organic frameworks (MOFs). MOFs are a family of crystalline porous materials that have been widely studied as supports for molecules ranging from gases to biomolecules through physisorption and chemisorption. Herein, we offer a perspective on the current applications of ITC in MOFs, including the mechanism of small molecule adsorption and the formation of MOF-based composite materials through noncovalent interactions. Experimental considerations specific to running ITC experiments in MOF systems are reviewed on the basis of existing reports. We conclude by discussing underexplored, but promising, MOF-related research directions which could be elucidated by ITC.

Exchange of coordinated carboxylates with azolates as a route to obtain a microporous zinc-azolate framework.

Metal-organic frameworks (MOFs) containing open metal sites are advantageous for wide applications. Here, carboxylate linkers are replaced with triazolate coordination in pre-formed Zn-MOF-74 via solvent-assisted linker exchange (SALE) to prepare the novel NU-250, within the known hexagonal channel-based MAF-X25 series that has not previously been synthesized de novo.

Creating Optimal Pockets in a Clathrochelate-Based Metal-Organic Framework for Gas Adsorption and Separation: Experimental and Computational Studies.

The rational design and synthesis of robust metal-organic frameworks (MOFs) based on novel organic building blocks are fundamental aspects of reticular chemistry. Beyond simply fabricating new organic linkers, however, it is important to elucidate structure-property relationships at the molecular level to develop high-performing materials. In this work, we successfully targeted a highly porous and robust cage-type MOF (NU-200) with an nbo-derived fof topology through the deliberate assembly of a cyclohexane-functionalized iron(II)-clathrochelate-based meta-benzenedicarboxylate linker with a Cu2(CO2)4 secondary building unit (SBU). NU-200 exhibited an outstanding adsorption capacity of xenon and a high ideal adsorbed solution theory (IAST) predicted selectivity for a 20/80 v/v mixture of xenon (Xe)/krypton (Kr) at 298 K and 1.0 bar. Our extensive computational simulations with grand canonical Monte Carlo (GCMC) and density functional theory (DFT) on NU-200 indicated that the MOF's hierarchical bowl-shaped nanopockets surrounded by custom-designed cyclohexyl groups─instead of the conventionally believed open metal sites (OMSs)─played a crucial role in reinforcing Xe-binding affinity. The optimally sized pockets firmly trapped Xe through numerous supramolecular interactions including Xe···H, Xe···O, and Xe···π. Additionally, we validated the unique pocket confinement effect by experimentally and computationally employing the similarly sized probe, sulfur dioxide (SO2), which provided significant insights into the molecular underpinnings of the high uptake of SO2 (11.7 mmol g-1), especially at a low pressure of 0.1 bar (8.5 mmol g-1). This work therefore can facilitate the judicious design of organic building blocks, producing MOFs featuring tailor-made pockets to boost gas adsorption and separation performances.

Modulating Chemical Environments of Metal-Organic Framework-Supported Molybdenum(VI) Catalysts for Insights into the Structure-Activity Relationship in Cyclohexene Epoxidation.

Solid supports are crucial in heterogeneous catalysis due to their profound effects on catalytic activity and selectivity. However, elucidating the specific effects arising from such supports remains challenging. We selected a series of metal-organic frameworks (MOFs) with 8-connected Zr6 nodes as supports to deposit molybdenum(VI) onto to study the effects of pore environment and topology on the resulting Mo-supported catalysts. As characterized by X-ray absorption spectroscopy (XAS) and single-crystal X-ray diffraction (SCXRD), we modulated the chemical environments of the deposited Mo species. For Mo-NU-1000, the Mo species monodentately bound to the Zr6 nodes were anchored in the microporous c-pore, but for Mo-NU-1008 they were bound in the mesopore of Mo-NU-1008. Both monodentate and bidentate modes were found in the mesopore of Mo-NU-1200. Cyclohexene epoxidation with H2O2 was probed to evaluate the support effect on catalytic activity and to unveil the resulting structure-activity relationships. SCXRD and XAS studies demonstrated the atomically precise structural differences of the Mo binding motifs over the course of cyclohexene epoxidation. No apparent structural change was observed for Mo-NU-1000, whereas the monodentate mode of Mo species in Mo-NU-1008 and the monodentate and bidentate Mo species in Mo-NU-1200 evolved to a new bidentate mode bound between two adjacent oxygen atoms from the Zr6 node. This work demonstrates the great advantage of using MOF supports for constructing heterogeneous catalysts with modulated chemical environments of an active species and elucidating structure-activity relationships in the resulting reactions.

Water Sorption Evolution Enabled by Reticular Construction of Zirconium Metal-Organic Frameworks Based on a Unique [2.2]Paracyclophane Scaffold.

Water vapor sorption by metal-organic frameworks (MOFs) has gathered significant interest because of its prominent potential in many applications such as moisture harvesting, dehumidification, heat pump regulation, and hydrolysis catalysis. However, the reticular design and exploration of robust and high-performing Zr-MOFs for such purposes remains a sought-after endeavor. In this work, we present the deployment of reticular chemistry to target a series of robust Zr-MOFs based on a unique [2.2]paracyclophane (PCP) scaffold. The ease of functionalization of PCP enables the desired synthesis of three carboxylate linkers, one ditopic and two tetratopic, which further assemble into a total of five Zr-MOFs with distinct topological structures, i.e., a new 2D net (NU-700), fcu (NU-405), flu (NU-1800), she (NU-602), scu (NU-913). Notably, the water vapor sorption performances of all the Zr-MOFs are highly dependent on their framework topology and pore metric, in which NU-602 and NU-913 with uniform 1D channels exhibit S-shaped water sorption isotherms with a steep pore-filling step and high uptake capacities of 0.72 g g-1 at 70% relative humidity (RH) and 0.88 g g-1 at 60% RH, respectively. Moreover, NU-913 displays exceptionally high working capacity of 0.72 g g-1 in the range of 40-60% RH. Additionally, we demonstrate that the hydrolytic stability and water adsorption-desorption recyclability of NU-913 can be remarkably improved by capping the Zr6 nodes with the more hydrophobic agent, trifluoroacetic acid, making it a potential candidate for water sorption-based applications.