Solution-processed Sb2Se3 photocathodes under Se-rich conditions and their photoelectrochemical properties.

In this study, selenium (Se)-rich antimony selenide (Sb2Se3) films were fabricated by applying a solution process with the solvents ethylenediamine and 2-mercaptoethanol to optimize the photoelectrochemical (PEC) performance of the Sb2Se3 photocathode. Various antimony (Sb)-Se precursor solutions with different molar ratios of Sb and Se (Sb : Se = 1 : 1.5, 1 : 3, 1 : 4.5, 1 : 7.5, and 1 : 9) were prepared to attain Se-rich fabrication conditions. As a result, the Se-rich Sb2Se3 films fabricated using the Sb-Se precursor solution with a molar ratio of Sb : Se = 1 : 7.5 exhibited an improved PEC performance, compared to the stoichiometric Sb2Se3 film. The charge transport was improved by the abundant Se element and thin selenium oxide (Se2O3) layer in the Se-rich Sb2Se3 film, resulting in a decrease in Se vacancies and substitutional defects. Moreover, the light utilization in the long wavelength region above 800 nm was enhanced by the light-trapping effect because of the nanowire structure in the Se-rich Sb2Se3 film. Hence, the optimal Se-rich Sb2Se3 photocathodes showed an improved photocurrent density of -0.24 mA cm-2 at the hydrogen evolution reaction potential that was three times higher than that of the stoichiometric Sb2Se3 photocathodes (-0.08 mA cm-2).

Key Strategies on Cu2O Photocathodes toward Practical Photoelectrochemical Water Splitting.

Cuprous oxide (Cu2O) has been intensively in the limelight as a promising photocathode material for photoelectrochemical (PEC) water splitting. The state-of-the-art Cu2O photocathode consists of a back contact layer for transporting the holes, an overlayer for accelerating charge separation, a protection layer for prohibiting the photocorrosion, and a hydrogen evolution reaction (HER) catalyst for reducing the overpotential of HER, as well as a Cu2O layer for absorbing sunlight. In this review, the fundamentals and recent research progress on these components of efficient and durable Cu2O photocathodes are analyzed in detail. Furthermore, key strategies on the development of Cu2O photocathodes for the practical PEC water-splitting system are suggested. It provides the specific guidelines on the future research direction for the practical application of a PEC water-splitting system based on Cu2O photocathodes.

Characterization of Cu2O/CuO heterostructure photocathode by tailoring CuO thickness for photoelectrochemical water splitting.

Cu2O/CuO heterostructure is a well-known strategy to improve the performance of Cu2O photocathodes for photoelectrochemical (PEC) water splitting. The CuO thickness in the Cu2O/CuO heterostructure is considered as a critical factor affecting the PEC performance because it is highly related to the light utilization and charge separation/transport. In this study, the Cu2O/CuO photocathode tailoring the CuO thickness was investigated to examine the CuO thickness influence on the PEC performance. Cu2O/CuO photocathodes were prepared by the electrodeposition and subsequent thermal annealing process and the Cu2O/CuO heterostructure was controlled by the annealing temperature and time. It was demonstrated that the increased CuO thickness enhances the light absorption in the long wavelength region and improves the charge separation by the reinforced band bending. However, the thick CuO hinders the efficient charge transport in the Cu2O/CuO heterostructure, resulting in the decreased PEC performance. Therefore, it is necessary to optimize the CuO thickness for the enhanced PEC performance of Cu2O/CuO photocathodes. Consequently, the Cu2O/CuO photocathode consisting of the similar CuO thickness with its minority carrier diffusion length (∼90 nm) was fabricated by annealing at 350 °C for 20 min, and it shows the optimal PEC performance (-1.2 mA cm-2 at 0 V vs. RHE) in pH 6.5 aqueous solution, resulting from the enhanced light utilization and the reinforced band bending.

Electrocatalytic Properties of Pulse-Reverse Electrodeposited Nickel Phosphide for Hydrogen Evolution Reaction.

Nickel phosphide (Ni-P) films as a catalytic cathode for the hydrogen evolution reaction (HER) of a water splitting were fabricated by a pulse-reverse electrodeposition technique. The electrochemical behaviors for the electrodeposition of Ni-P were investigated by the characterization of peaks in a cyclic voltammogram. The composition of the electrodeposited Ni-P alloys was controlled by adjusting duty cycles of the pulse-reverse electrodeposition. The HER electrocatalytic properties of the Ni-P electrodeposits with an amorphous phase as a function of phosphorous contents existing in Ni-P were electrochemically characterized by the analysis of overpotentials, Tafel slopes, and electrochemical impedance spectrometry. Additionally, the elemental Ni-embedded crystalline Ni3P was prepared by an annealing process with the amorphous Ni69P31 electrodeposit with high contents of phosphorus. The crystalline structure with Ni inclusions in the matrix of Ni3P was formed by the precipitation of excess Ni. The electrocatalytic properties of crystalline Ni3P with elemental Ni inclusions were also investigated by electrochemical characterization.

Structural and Compositional Investigations on the Stability of Cuprous Oxide Nanowire Photocathodes for Photoelectrochemical Water Splitting.

Cuprous oxide (Cu2O) is a promising photocathode material for photoelectrochemical (PEC) water splitting. Recently, the PEC performances of Cu2O-based devices have been considerably improved by introducing nanostructures, semiconductor overlayers, and hydrogen evolution reaction (HER) catalysts. However, Cu2O devices still suffer from poor stability in aqueous solution, especially in strong acidic or alkaline conditions, despite the use of an intrinsically stable oxide overlayer as a protection layer. Thus, it is essential to fully understand the stability of the entire Cu2O photocathodes in these conditions for establishing suitable protection strategies to achieve durable PEC water splitting. In this work, the stability of bare and protected Cu2O nanowire (NW) photocathodes was evaluated in detail using microscopy techniques and compositional analyses. The insights gained in this work will guide the design and synthesis of durable photoelectrodes for PEC water splitting.

Cancer Survivors with Low Hand Grip Strength Have Decreased Quality of Life Compared with Healthy Controls: The Korea National Health and Nutrition Examination Survey 2014-2017.

BACKGROUND: Cancer survivors experience decreased physical function and reduced muscle strength, which leads to lower quality of life (QOL). The hand grip strength (HGS) can be a predictor of poor health-related QOL as a parameter of sarcopenia. The purpose of this study was to investigate the relationship between low HGS and QOL in cancer survivors and healthy controls. METHODS: We analyzed 392 cancer survivors and 1,176 healthy controls from the Korea National Health and Nutrition Examination Survey, 2014-2017. We defined low HGS as 2 standard deviation values for healthy young Korean adults from a previous study. QOL was evaluated using the European Quality of Life Scale-Five Dimensions. A complex sample logistic regression model was used to assess the relationship between each dimension of low HGS and QOL. RESULTS: The odds ratios (ORs) for decreased QOL were significantly higher in male cancer survivors with low HGS on self-care (OR, 8.51; 95% confidence interval [CI], 1.69-42.83) and usual activities (OR, 6.63; 95% CI, 1.22-36.03). The ORs for problems in mobility (OR, 5.87; 95% CI, 2.04-16.91), usual activities (OR, 14.46; 95% CI, 3.84-54.44), pain/discomfort (OR, 4.90; 95% CI, 2.00-12.01), and anxiety/depression (OR, 6.43; 95% CI, 2.16-19.12) were significantly high in female cancer survivors with low HGS. However, healthy controls showed no significant relationship between low HGS and QOL. CONCLUSION: For cancer survivors, low HGS was associated with poor QOL in some domains. Strategies to increase muscle strength must be considered to improve the QOL of cancer survivors.

Characteristics of crystalline sputtered LaFeO3 thin films as photoelectrochemical water splitting photocathodes.

Stable photoelectrochemical (PEC) operation is a critical issue for the commercialization of PEC water-splitting systems. Unfortunately, most semiconductor photocathodes generating hydrogen in these systems are unstable in aqueous solutions. This is a huge limitation for the development of durable PEC water-splitting systems. Lanthanum iron oxide (LaFeO3) is a promising p-type semiconductor to overcome this drawback because of its stability in an aqueous solution and its proper energy level for reducing water. In this study, we fabricated a crystalline LaFeO3 thin film by radio frequency magnetron sputtering deposition and a post-annealing process in air for use as a PEC photocathode. Based on the morphological, compositional, optical and electronic characterizations, we found that it was ideal for a visible light-responsive PEC photocathode and tandem PEC water-splitting system with a small band gap absorber behind it. Furthermore, it showed stable PEC performance in a strong alkaline solution during PEC operation without any protection layers. Therefore, the crystalline sputtered LaFeO3 thin film suggested in this study would be feasible to apply as a PEC photocathode for durable, simple and low-cost PEC water splitting.

Enhanced Charge Collection with Passivation Layers in Perovskite Solar Cells.

The Al2 O3 passivation layer is beneficial for mesoporous TiO2 -based perovskite solar cells when it is deposited selectively on the compact TiO2 surface. Such a passivation layer suppressing surface recombination can be formed by thermal decomposition of the perovskite layer during post-annealing.

Cu2O Nanowire Photocathodes for Efficient and Durable Solar Water Splitting.

Due to its abundance, scalability, and nontoxicity, Cu2O has attracted extensive attention toward solar energy conversion, and it is the best performing metal oxide material. Until now, the high efficiency devices are all planar in structure, and their photocurrent densities still fall well below the theoretical value of 14.5 mA cm(-2) due to the incompatible light absorption and charge carrier diffusion lengths. Nanowire structures have been considered as a rational and promising approach to solve this issue, but due to various challenges, performance improvements through the use of nanowires have rarely been achieved. In this work, we develop a new synthetic method to grow Cu2O nanowire arrays on conductive fluorine-doped tin oxide substrates with well-controlled phase and excellent electronic and photonic properties. Also, we introduce an innovative blocking layer strategy to enable high performance. Further, through material engineering by combining a conformal nanoscale p-n junction, durable protective overlayer, and uniform catalyst decoration, we have successfully fabricated Cu2O nanowire array photocathodes for hydrogen generation from solar water splitting delivering unprecedentedly high photocurrent densities of 10 mA cm(-2) and stable operation beyond 50 h, establishing a new benchmark for metal oxide based photoelectrodes.