CuMoO4/Ti3C2Tx nanocomposite layers perform as an ultrasensitive electrochemical sensor for the detection of antioxidant rutin.

The focus of this paper is laid on synthesizing layered compounds of CuMoO4 and Ti3C2Tx using a simple wet chemical etching method and sonochemical method to enable rapid detection of rutin using an electrochemical sensor. Following structural examinations using XRD, surface morphology analysis using SEM, and chemical composition state analysis using XPS, the obtained CuMoO4/Ti3C2Tx nanocomposite electrocatalyst was confirmed and characterized. By employing cyclic voltammetry and differential pulse voltammetry, the electrochemical properties of rutin on a CuMoO4/Ti3C2Tx modified electrode were examined, including its stability and response to variations in pH, loading, sweep rate, and interference. The CuMoO4/Ti3C2Tx modified electrode demonstrates rapid rutin sensing under optimal conditions and offers a linear range of 1 µΜ to 15 µΜ, thereby improving the minimal detection limit (LOD) to 42.9 nM. According to electrochemical analysis, the CuMoO4/Ti3C2Tx electrode also demonstrated cyclic stability and long-lasting anti-interference capabilities. The CuMoO4/Ti3C2Tx nanocomposite demonstrated acceptable recoveries when used to sense RT in apple and grape samples. In comparison to other interfering sample analytes encountered in the current study, the developed sensor demonstrated high selectivity and anti-interference performance. As a result, our research to design of high-performance electrochemical sensors in the biomedical and therapeutic fields.

Influence of shock waves on bifunctional nickel particles: Enhancing magnetic properties and supercapacitor applications.

In the present study, shock-wave impact experiments were conducted to investigate the structural properties of nickel metal powder when exposed to shock waves. Both X-ray diffractometry and scanning electron microscopy were used to evaluate the structural and surface morphological changes in the shock-loaded samples. Notably, the experimental results revealed variations in lattice parameters and cell structures as a function of the number of shock pulses and the increasing volume. The transition occurred from P2 (100 shocks) to P3 (200 shocks). Remarkably, P5 (400 shocks) exhibited attempts to return to its initial state, and intriguingly, P4 displayed characteristics reminiscent of the pre-shock condition. Additionally, significant morphological changes were observed with an increase in shock pulses. Magnetic measurements revealed an increase in magnetic moment for P2, P3, and P4, but a return to the original state was observed for P5. Moreover, the capacitance exhibited an upward trend with increasing shock pulses, except for P5, where it experienced a decline. These findings underscore the significant impact of even mild shock waves on the physical and chemical characteristics of bifunctional nickel particles. This research sheds light on the potential applications of shock wave-induced structural changes in enhancing the magnetic properties and supercapacitor performance of nickel particles.

Pressure Dependence of Superconducting Properties, Pinning Mechanism, and Crystal Structure of the Fe0.99Mn0.01Se0.5Te0.5 Superconductor.

We have investigated the pressure (P) effect on structural (up to 10 GPa), transport [R(T): up to 10 GPa], and magnetic [(M(T): up to 1 GPa)] properties and analyzed the flux pinning mechanism of the Fe0.99Mn0.01Se0.5Te0.5 superconductor. The maximum superconducting transition temperature (T c) of 22 K with the P coefficient of T c dT c/dP = +2.6 K/GPa up to 3 GPa (dT c/dP = -3.6 K/GPa, 3 ≤ P ≥ 9 GPa) was evidenced from R(T) measurements. The high-pressure diffraction and density functional theory (DFT) calculations reveal structural phase transformation from tetragonal to hexagonal at 5.9 GPa, and a remarkable change in the unit cell volume is observed at ∼3 GPa where the T c starts to decrease, which may be due to the reduction of charge carriers, as evidenced by a reduction in the density of states (DOS) close to the Fermi level. At higher pressures of 7.7 GPa ≤ P ≥ 10.2 GPa, a mixed phase (tetragonal + hexagonal phase) is observed, and the T c completely vanishes at 9 GPa. A significant enhancement in the critical current density (J C) is observed due to the increase of pinning centers induced by external pressure. The field dependence of the critical current density under pressure shows a crossover from the δl pinning mechanism (at 0 GPa) to the δT c pinning mechanism (at 1.2 GPa). The field dependence of the pinning force at ambient condition and under pressure reveals the dense point pinning mechanism of Fe0.99Mn0.01Se0.5Te0.5. Moreover, both upper critical field (H C2) and J C are enhanced significantly by the application of an external P and change over to a high P phase (hexagonal ∼5.9 GPa) faster than a Fe0.99Ni0.01Se0.5Te0.5 (7.7 GPa) superconductor.

Hybrid Ni-Boron Nitride Nanotube Magnetic Semiconductor-A New Material for Spintronics.

Here, we report the presence of ferromagnetism in hybrid nickel-boron nitride nanotubes (BNNTs) with an ordered structure, synthesized by chemical vapor deposition using elemental boron, nickel oxide as the catalyst, and ammonia gas as the source for nitrogen. In previous studies, the nanotubes were synthesized with two metal oxide catalysts, whereas here, only a single catalyst was used. The nanotube's structure was determined by X-ray diffraction, scanning electron microscopy, and high-resolution transmission electron microscopy. Purity of the nanotubes synthesized at 1150 °C was exceptional and this was determined by Raman spectroscopy. The average diameter of the nanotubes was 63 nm. Based on the magnetic studies carried out, it can be confirmed that the synthesized hybrid material is ferromagnetic at room temperature. Cyclic voltammetry was carried out to confirm the dielectric nature of the nanotubes. These materials could pave ways to nanoscale devices. The well-known thermal stability of BNNTs would play a vital role in preventing thermal failures in such small-scale devices where overheating is a major concern. The presence of semiconducting and magnetic properties in a single material could be confirmed, which might be highly significant in the field of spintronics.

Pressure assisted enhancement in superconducting properties of Fe substituted NbSe2 single crystal.

The impact of hydrostatic pressure (P) up to 1 GPa on T c , J c and the nature of the pinning mechanism in FexNbSe2 single crystals have been investigated within the framework of the collective theory. We found that the pressure can induce a transition from the regime where pinning is controlled by spatial variation in the critical transition temperature (δT c ) to the regime controlled by spatial variation in the mean free path (δℓ). Furthermore, T c and low field J c are slightly induced, although the J c drops more rapidly at high fields than at ambient P. The pressure effect enhances the anisotropy and reduces the coherence length, resulting in weak interaction of the vortex cores with the pinning centers. Moreover, the P can induce the density of states, which, in turn, leads to enhance in T c with increasing P. P enhances the T c with the rates of dT c /dP of 0.86, 1.35 and 1.47 K/GPa for FexNbSe2, respectively. The magnetization data are used to establish a vortex phase diagram. The nature of the vortices has been determined from the scaling behaviour of the pinning force density extracted from the J c -H isotherms and demonstrates the point pinning mechanism.