Rapid one-pot synthesis of LiMPO4 (M = Fe, Mn) colloidal nanocrystals by supercritical ethanol process.

We report a rapid one-pot supercritical fluid approach to prepare the desired size and morphology controlled LiMPO(4) nanocrystals, using oleylamine as both capping and reducing agent.

Rapid and direct conversion of graphite crystals into high-yielding, good-quality graphene by supercritical fluid exfoliation.

Graphene has attracted a great deal of attention in recent years due to its unusual electronic, mechanical, and thermal properties. Exploiting graphene properties in a variety of applications requires a chemical approach for the large-scale production of high-quality, processable graphene sheets (GS), which has remained an unanswered challenge. Herein, we report a rapid one-pot supercritical fluid (SCF) exfoliation process for the production of high-quality, large-scale, and processable graphene for technological applications. Direct high-yield conversion of graphite crystals to GS is possible under SCF conditions because of the high diffusivity and solvating power of SCFs, such as ethanol, N-methyl-pyrrolidone (NMP), and DMF. For the first time, we report a one-pot direct conversion of graphite crystals to a high yield of graphene sheets in which about 90-95% of the exfoliated sheets are < 8 layers with approximately 6-10% monolayers and the remaining 5-10% are > or = 10 layers.

Electrochemical and photosensitized redox reactions of a prussian blue film layered on a WO3/[Ru(bpy)3]2+/polymer hybrid film.

A hybrid film of WO(3)/tris(2,2'-bipyridine)ruthenium(II) ([Ru(bpy)(3)](2+))/poly(sodium 4-styrenesulfonate) (PSS) (denoted as a WRP hybrid film) was prepared as a base layer on an indium tin oxide electrode substrate by cathodic electrodeposition from a colloidal ternary solution containing peroxotungstic acid, [Ru(bpy)(3)](2+), and PSS. Prussian blue, Fe(III) (4)[Fe(II)(CN)(6)](3) (Fe(II)-Fe(III)) was cathodically electrodeposited on the WRP hybrid film from a Berlin brown (Fe(III)-Fe(III)) colloidal solution to give a WRP/Fe(II)-Fe(III) bilayer film. Spectrocyclic voltammetry measurement of the WRP/Fe(II)-Fe(III) bilayer film reveals that Prussian white (Fe(II)-Fe(II)) is oxidized to Fe(II)-Fe(III) by electrogenerated Ru(III), and Fe(II)-Fe(III) is re-reduced to Fe(II)-Fe(II) by electrogenerated H(x)WO(3). Visible-light irradiation of the WRP hybrid film generates a small photocurrent (approximately 8 nA cm(-2)) at 0.4 V of an applied potential, whereas irradiation of the WRP/Fe(II)-Fe(II) bilayer film (Fe(II)-Fe(III) is electrochemically reduced to the Fe(II)-Fe(II) state) significantly generates a steady photoanodic current of 2.0-1.1 microA cm(-2) under the same conditions, thus demonstrating that the photoanodic current is produced by the layered Fe(II)-Fe(II) film. The photoaction spectrum of the bilayer film reveals that the photoanodic current is based on the photoexcitation of [Ru(bpy)(3)](2+). The photogeneration of Fe(II)-Fe(III) from Fe(II)-Fe(II) is shown by the absorption spectral change of the bilayer film on irradiation. These results corroborate the notion that Fe(II)-Fe(II) is oxidized by photogenerated Ru(III) to generate Fe(II)-Fe(III). However, the rate of photogeneration of Fe(II)-Fe(III) is slow, which could be ascribed to the fast back electron transfer (ET) from WO(3) to Ru(III), comparable with the forward ET from Fe(II)-Fe(II) to Ru(III). The fast back ET could be a crucial problem for the [Ru(bpy)(3)](2+)-sensitized reaction in the hybrid film.

Artificial model of photosynthetic oxygen evolving complex: catalytic O2 production from water by di-mu-oxo manganese dimers supported by clay compounds.

Adsorption of [(OH(2))(terpy)Mn(mu-O)(2)Mn(terpy)(OH(2))](3+) (terpy=2,2':6',2"-terpyridine) (1) onto montmorillonite K10 (MK10) yielded catalytic dioxygen (O(2)) evolution from water using a Ce(IV) oxidant. The Mn K-edge X-ray absorption near edge structure (XANES) of the 1/MK10 hybrid suggested that the oxidation state of the di-mu-oxo Mn(2) core could be Mn(III)-Mn(IV). However the pre-edge peak in the XANES spectrum of 1 adsorbed on MK10 is different from the neat 1 powder. The kinetic analysis of O(2) evolution showed that the catalysis requires cooperation of two equivalents of 1 adsorbed on MK10. The reaction of the [(bpy)(2)Mn(mu-O)(2)Mn(bpy)(2)](3+) (bpy=2,2'-bipyridine) (2)/MK10 hybrid with a Ce(IV) oxidant evolved O(2). However, the turnover number value was less than unity for 2/MK10, showing that 2 adsorbed on MK10 does not work as a catalyst. The terminal water ligands could be an important for the catalysis by adsorbed 1. The mechanism of O(2) production by photosynthetic oxygen evolving complex is discussed based on catalytic O(2) evolution by 1 adsorbed on MK10.

Characterization and activity analysis of catalytic water oxidation induced by hybridization of [(OH(2))(terpy)Mn(mu-O)(2)Mn(terpy)(OH(2))](3+) and clay compounds.

Hybridization of [(OH(2))(terpy)Mn(mu-O)(2)Mn(terpy)(OH(2))](3+) (terpy= 2,2':6',2' '-terpyridine) (1) and mica clay yielded catalytic dioxygen (O(2)) evolution from water using a CeIV oxidant. The reaction was characterized by various spectroscopic measurements and a kinetic analysis of O(2) evolution. X-ray diffraction (XRD) data indicates the interlayer separation of mica changes upon intercalation of 1. The UV-vis diffuse reflectance (RD) and Mn K-edge X-ray absorption near-edge structure (XANES) data suggest that the oxidation state of the di-mu-oxo Mn(2) core is Mn(III)-Mn(IV), but it is not intact. In aqueous solution, the reaction of 1 with a large excess Ce(IV) oxidant led to decomposition of 1 to form MnO(4-) ion without O(2) evolution, most possibly by its disproportionation. However, MnO(4-) formation is suppressed by adsorption of 1 on clay. The maximum turnover number for O(2) evolution catalyzed by 1 adsorbed on mica and kaolin was 15 and 17, respectively, under the optimum conditions. The catalysis occurs in the interlayer space of mica or on the surface of kaolin, whereas MnO(4-) formation occurs in the liquid phase, involving local adsorption equilibria of adsorbed 1 at the interface between the clay surface and the liquid phase. The analysis of O(2) evolution activity showed that the catalysis requires cooperation of two equivalents of 1 adsorbed on clay. The second-order rate constant based on the concentration (mol g(-1)) of 1 per unit weight of clay was 2.7 +/- 0.1 mol(-1) s(-1) g for mica, which is appreciably lower than that for kaolin (23.9 +/- 0.4 mol(-1) s(-1) g). This difference can be explained by the localized adsorption of 1 on the surface for kaolin. However, the apparent turnover frequency ((kO(2))app/s(-1)) of 1 on mica was 2.2 times greater than on kaolin when the same fractional loading is compared. The higher cation exchange capacity (CEC) of mica statistically affords a shorter distance between the anionic sites to which 1 is attracted electrostatically, making the cooperative interaction between adsorbed molecules of 1 easier than that on kaolin. The higher CEC is important not only for attaining a higher loading but also for the higher catalytic activity of adsorbed 1.

Electrochromic hysteresis performance of a prussian blue film arising from electron-transfer control by a tris(2,2'-bipyridine)ruthenium(II)-doped WO(3) film as studied by a spectrocyclic voltammetry technique.

A [Ru(bpy)(3)](2+) (bpy=2,2'-bipyridine)-doped WO(3) film was prepared as a base layer on a substrate by cathodic electrodeposition from a colloidal triad solution containing peroxotungstic acid (PTA), [Ru(bpy)(3)](2+), and poly(sodium 4-styrenesulfonate) (PSS). A Prussian blue (PB; Fe(II)-Fe(III)) film was cathodically electrodeposited on the [Ru(bpy)(3)](2+)-doped WO(3) film or neat WO(3) film from an aqueous Berlin brown (BB; Fe(III)-Fe(III)) colloid solution to yield a [Ru(bpy)(3)](2+)-doped WO(3)/PB bilayer film or WO(3)/PB bilayer film. For the spectrocyclic voltammogram (SCV) of the WO(3)/PB film, a redox response of Prussian white (PW; Fe(II)-Fe(II))/PB was observed at 0.11 V, however, further oxidation of PB to BB was not allowed by the interfacial n-type Schottky barrier between the WO(3) and PB layers. For the [Ru(bpy)(3)](2+)-doped WO(3)/PB film, any electrochemical response assigned to the redox of PB was not observed in the cyclic voltammogram, however, the in situ absorption spectral change recorded simultaneously showed the significant redox reactions based on PB. The SCV revealed that PW on the [Ru(bpy)(3)](2+)-doped WO(3) film is completely oxidized to PB by a geared reaction of Ru(II)/Ru(III) at 1.05 V, and that 32 % of PB formed is further oxidized to BB by the same geared reaction in the potential scan to 1.5 V. PB was completely re-reduced to PW by a geared reaction of H(x)WO(3)/WO(3) at -0.5 V in the reductive potential scan. These geared electrochemical reactions produced an electrochromic hysteresis performance of the PB film layered on the [Ru(bpy)(3)](2+)-doped WO(3) film.

Preparation and multicolor electrochromic performance of a WO3/tris(2,2'-bipyridine)ruthenium(II)/polymer hybrid film.

A tungsten trioxide (WO(3))/tris(2,2'-bipyridine)ruthenium(II) ([Ru(bpy)(3)](2+); bpy=2,2'-bipyridine)/poly(sodium 4-styrenesulfonate) (PSS) hybrid film was prepared by electrodeposition from a colloidal triad solution containing peroxotungstic acid (PTA), [Ru(bpy)(3)](2+), and PSS. A binary solution of [Ru(bpy)(3)](2+) and PTA (30 vol % ethanol in water) gradually gave an orange precipitate, possibly caused by the electrostatic interaction between the cationic [Ru(bpy)(3)](2+) and the anionic PTA. The addition of PSS to the binary PTA/[Ru(bpy)(3)](2+) solution remarkably suppressed this precipitation and caused a stable, colloidal triad solution to form. The spectrophotometric measurements and lifetime analyses of the photoluminescence from the excited [Ru(bpy)(3)](2+) ion in the colloidal triad solution suggested that the [Ru(bpy)(3)](2+) ion is partially shielded from electrostatic interaction with anionic PTA by the anionic PSS polymer chain. The formation of the colloidal triad made the ternary [Ru(bpy)(3)](2+)/PTA/PSS solution much more redox active. Consequently, the rate of electrodeposition of WO(3) from PTA increased appreciably by the formation of the colloidal triad, and fast electrodeposition is required for the unique preparation of this hybrid film. The absorption spectrum of the [Ru(bpy)(3)](2+) ion in the film was close to its spectrum in water, but the photoexcited state of the [Ru(bpy)(3)](2+) ion was found to be quenched completely by the presence of WO(3) in the hybrid film. The cyclic voltammogram (CV) of the hybrid film suggested that the [Ru(bpy)(3)](2+) ion performs as it is adsorbed onto WO(3) during the electrochemical oxidation. An ohmic contact between the [Ru(bpy)(3)](2+) ion and the WO(3) surface could allow the electrochemical reaction of adsorbed [Ru(bpy)(3)](2+). The composition of the hybrid film, analyzed by electron probe microanalysis (EPMA), suggested that the positive charge of the [Ru(bpy)(3)](2+) ion could be neutralized by partially reduced WO(3)(-) ions, in addition to Cl(-) and PSS units, based on the charge balance in the film. The electrostatic interaction between the WO(3)(-) ion and the [Ru(bpy)(3)](2+) ion might be responsible for forming the electron transfer channel that causes the complete quenching of the photoexcited [Ru(bpy)(3)](2+) ion, as well as the formation of the ohmic contact between the [Ru(bpy)(3)](2+) ion and WO(3). A multicolor electrochromic performance of the WO(3)/[Ru(bpy)(3)](2+)/PSS hybrid film was observed, in which transmittances at 459 and 800 nm could be changed, either individually or at once, by the selection of a potential switch. Fast responses, of within a few seconds, to these potential switches were exhibited by the electrochromic hybrid film.