Arbuscular mycorrhizal fungi can ameliorate salt stress in Elaeagnus angustifolia by improving leaf photosynthetic function and ultrastructure.

Arbuscular mycorrhizal fungi (AMF) can form symbiosis with Elaeagnus angustifolia, allowing this species to tolerate salt stress. However, the physiological mechanism through which AMF improve E. angustifolia tolerance is still unclear. In this study, we examined E. angustifolia inoculated with AMF Rhizophagus irregularis (M) or inactivated inoculum (NM) under 0 and 300 mM NaCl stress for the determination of photosynthetic gas exchange, pigment content, chlorophyll fluorescence, antioxidant capacity and chloroplast ultrastructural in leaves. Photosynthetic gas exchange parameters in the leaves of M and NM decreased significantly under salt stress, while the M treatment significantly reduced the effect of salt stress compared with NM. Various chlorophyll components in the M treatment were two- to three-fold higher than in NM, together with a much more complex chloroplast structure and higher number of plastoglobules. The total flavonoid and proline content in leaves of M increased significantly, while the concentration of malondialdehyde (MDA) decreased significantly under salt stress. Chlorophyll fluorescence data also showed good PSII function in the M treatment, together with salt stress reduction of photochemical reactions and sharp enhancements in non-photosynthetic quenching (NPQ). AMF inoculation ameliorated the inhibition on the actual PSII efficiency (ФPSII) and the photochemical quenching coefficient (qP ) by 10-15%. Our results clearly demonstrate that R. irregularis can improve the salt tolerance of plants by improving leaf photosynthetic performance, PSII function, antioxidant capacity and leaf chloroplast ultrastructure, and that E. angustifolia inoculated with AMF could enhance saline soil rehabilitation.

[Analysis of single-nucleotide polymorphism of Sonic hedgehog signaling pathway in non-syndromic cleft lip and/or palate in the Chinese population].

OBJECTIVE: To study the relationship between Sonic hedgehog (Shh) associated single-nucleotide polymorphism (SNP) and non-syndromic cleft lip and/or palate (NSCL/P), and to explore the risk factors of cleft lip and/or palate. Many studies suggest that the pathogenesis of NSCL/P could be related to genes that control early development, in which the Shh signaling pathway plays an important role. METHODS: Peripheral blood was collected from 197 individuals (100 patients with NSCL/P and 97 healthy controls). Haploview software was used for haplotype analysis and Tag SNP were selected, based on the population data of Han Chinese in Beijing of the international human genome haplotype mapping project. A total of 27 SNP were selected for the 4 candidate genes of SHH, PTCH1, SMO and GLI2 in the Shh signaling pathway. The genotypes of 27 SNP were detected and analyzed by Sequenom mass spectrometry. The data were analyzed by chi-squared test and an unconditional Logistic regression model. RESULTS: The selected SNP basically covered the potential functional SNP of the target genes, and its minimum allele frequency (MAF) was >0.05: GLI2 73.5%, PTCH1 91.0%, SMO 100.0%, and SHH 75.0%. It was found that the genotype frequency of SNP (rs12674259) located in SMO gene and SNP (rs2066836) located in PTCH1 gene were significantly different between the NSCL/P group and the control group. Linkage disequilibrium was also found on 3 chromosomes (chromosomes 2, 7 and 9) where the 4 candidate genes were located. However, in the analysis of linkage imbalance haplotype, there was no significant difference between the disease group and the control group. CONCLUSION: In China, NSCL/P is the most common congenital disease in orofacial region. However, as it is a multigenic disease and could be affected by multiple factors, such as the external environment, the etiology of NSCL/P has not been clearly defined. This study indicates that Shh signaling pathway is involved in the occurrence of NSCL/P, and some special SNP of key genes in this pathway are related to cleft lip and/or palate, which provides a new direction for the etiology research of NSCL/P and may provide help for the early screening and risk prediction of NSCL/P.

Correction: Systematic investigation of the SERS efficiency and SERS hotspots in gas-phase deposited Ag nanoparticle assemblies.

Correction for 'Systematic investigation of the SERS efficiency and SERS hotspots in gas-phase deposited Ag nanoparticle assemblies' by L. B. He et al., Phys. Chem. Chem. Phys., 2017, 19, 5091-5101.

Systematic investigation of the SERS efficiency and SERS hotspots in gas-phase deposited Ag nanoparticle assemblies.

Gas-phase deposited Ag nanoparticle assemblies are one of the most commonly used plasmonic substrates benefiting from their remarkable advantages such as clean particle surface, tunable particle density, available inter-particle gaps, low-cost and scalable fabrication, and excellent industry compatibility. However, their performance efficiencies are difficult to optimize due to the lack of knowledge of the hotspots inside their structures. We here report a design of delicate rainbow-like Ag nanoparticle assemblies, based on which the hotspots can be revealed through a combinatorial approach. The findings show that the hotspots in gas-phase deposited Ag nanoparticle assemblies are uniquely entangled by the excitation energy and specific inter-particle gaps, differing from the matching conditions in periodic arrays. For Ag nanoparticle assemblies deposited on Formvar-filmed substrates, the mean particle size is maintained around 10 nm, while the particle density can be widely tuned. The one possessing the highest SERS efficiency (under 473 nm excitation) have a particle number density of around 7100 µm-2. Gaps with an inter-particle spacing of around 3 nm are found to serve as SERS hotspots, and these hotspots contribute to 68% of the overall SERS intensity. For Ag nanoparticle assemblies fabricated on carbon-filmed substrates, the mean particle size can be feasibly tuned. The one possessing the highest SERS efficiency under 473 nm excitation has a particle number density of around 460 µm-2 and a mean particle size of around 42.1 nm. The construction of Ag-analyte-Ag sandwich-like nanoparticle assemblies by a two-step-deposition method slightly improves the SERS efficiency when the particle number density is low, but suppresses the SERS efficiency when the particle number density is high.

Signature of Strong Spin-Orbital Coupling in the Large Nonsaturating Magnetoresistance Material WTe2.

We report the detailed electronic structure of WTe2 by high resolution angle-resolved photoemission spectroscopy. We resolved a rather complicated Fermi surface of WTe2. Specifically, there are in total nine Fermi pockets, including one hole pocket at the Brillouin zone center Γ, and two hole pockets and two electron pockets on each side of Γ along the Γ-X direction. Remarkably, we have observed circular dichroism in our photoemission spectra, which suggests that the orbital angular momentum exhibits a rich texture at various sections of the Fermi surface. This is further confirmed by our density-functional-theory calculations, where the spin texture is qualitatively reproduced as the conjugate consequence of spin-orbital coupling. Since the spin texture would forbid backscatterings that are directly involved in the resistivity, our data suggest that the spin-orbit coupling and the related spin and orbital angular momentum textures may play an important role in the anomalously large magnetoresistance of WTe2. Furthermore, the large differences among spin textures calculated for magnetic fields along the in-plane and out-of-plane directions also provide a natural explanation of the large field-direction dependence on the magnetoresistance.

Scaling the dynamic electron scattering in imaging the graphene sheets by the high-angle annular dark-field microscopy.

Employing the graphene sheets (GSs), the electron scattering constants are measured in the high-angle annular dark-field (HAADF) imaging by the scanning transmission electron microscopy. Single scattering is found to be dominant until the layer number of 200, complying with a simple relation of I = Io(1 - e(-tau/lambda)). The discrete layer counting of the GSs enables precise determination of incident depths. This work results values of lambda = 48.2, 61.4, 97.9 and 115.6 nm for 80, 120, 160 and 200 keV electrons, respectively. The uncertainties with the mean free paths and the cross sections are confined to 10 percent. The dependences on the electron beam energy and the collection angle are discussed based on a multislice simulation.

Free-standing graphene by scanning transmission electron microscopy.

Free-standing graphene sheets have been imaged by scanning transmission electron microscopy (STEM). We show that the discrete numbers of graphene layers enable an accurate calibration of STEM intensity to be performed over an extended thickness and with single atomic layer sensitivity. We have applied this calibration to carbon nanoparticles with complex structures. This leads to the direct and accurate measurement of the electron mean free path. Here, we demonstrate potentials using graphene sheets as a novel mass standard in STEM-based mass spectrometry.

Enhanced thermal stability of monodispersed silver cluster arrays assembled on block copolymer scaffolds.

Triblock copolymer poly(styrene-b-butadiene-b-styrene) (SBS) films with long-range ordered self-assembled nanopatterns are used as templates to selectively adsorb soft-landing silver clusters. Closely spaced cluster arrays with high monodispersity are formed through the confinement of the block copolymer scaffolds, and show a much enhanced thermal stability as compared with the cluster assemblies on the surfaces of covalent amorphous solids, or even on the disordered SBS films. Their morphologies are barely influenced by long time thermal annealing at a temperature as high as 180 degrees C, while in the latter case intense aggregations and coalescences of silver clusters are commonly observed upon annealing. The different thermal stabilities of the cluster assemblies also induce different evolutions of their optical extinction spectra under annealing. This promises a simple way to control the monodispersity and thermal stability of metal cluster assembly via self-assembled block copolymer template.

Pharmacological studies on the sedative-hypnotic effect of Semen Ziziphi spinosae (Suanzaoren) and Radix et Rhizoma Salviae miltiorrhizae (Danshen) extracts and the synergistic effect of their combinations.

Semen Ziziphi spinosae (Suanzaoren in China) and Radix et Rhizoma Salviae miltiorrhizae (Danshen in China) are conventional herbal drugs in traditional Chinese medicine and have been used widely for the treatment of insomnia. In the present study, the sedative-hypnotic activity of the active fractions extracted from Suanzaoren and Danshen were studied using the method of pentobarbital-induced sleep in the mouse model. Qualitative analysis of the standardized extracts was carried out by HPLC-DAD. The results showed that the water extract of Suanzaoren (SWE) (400 and 800 mg/kg body wt.) and the ether extract of Danshen (DTT) (300 and 600 mg/kg body wt.) can shorten sleep latency significantly, increase sleeping time and prolong movement convalescence time induced by sodium pentobarbital (55 mg/kg body wt.) administration in mice. Furthermore, the combination of SWE and DTT showed significant synergistic effect (p<0.05) in decreasing sleep latency and increasing sleeping time, but not in prolonging the movement convalescence time, which might be helpful for energy recovery in the treatment of insomnia. The results suggest that SWE, DTT, and the combination of SWE and DTT possess significant sedative-hypnotic activity, which supports the popular use of Suanzaoren and Danshen for treatment of insomnia and provide the basis for new drug discovery. Furthermore, the results demonstrate that the combination of SWE and DTT may be preferable for the treatment of insomnia.

Naloxone and epinephrine are equally effective for cardiopulmonary resuscitation in a rat asphyxia model.

BACKGROUND: It is not known whether naloxone is as efficacious as epinephrine during cardiopulmonary resuscitation (CPR). The aim of the study was to compare the effects of naloxone and epinephrine on the outcomes of CPR following asphyxial cardiac arrest in rats. METHODS: Cardiac arrest was induced with asphyxia by clamping the tracheal tubes. Twenty-four Sprague-Dawley rats were randomized prospectively into a saline group (treated with normal saline, 1 ml intravenously, n = 8), an epinephrine group (treated with epinephrine, 0.04 mg/kg intravenously, n = 8) or a naloxone group (treated with naloxone, 1 mg/kg intravenously, n = 8) in a blind fashion during resuscitation after asphyxial cardiac arrest. After 5 min of untreated cardiac arrest, conventional manual CPR was started and each drug was administered at the same time. RESULTS: The rates of restoration of spontaneous circulation (ROSC) were one of eight (12.5%), seven of eight (87.5%) and seven of eight (87.5%) in the saline, epinephrine and naloxone groups, respectively. The rates of ROSC in the epinephrine and naloxone groups were equal and significantly greater than that in the saline group (P = 0.01 and P = 0.01, respectively). CONCLUSION: The administration of naloxone or epinephrine alone may increase the resuscitation rate, and both drugs are equally effective for CPR in a rat asphyxia model. However, the mechanism by which naloxone produces its efficacy during CPR remains unclear and further experimentation will be necessary.