Photothermally Crumpled MoS2 Film as an Omnidirectionally Stretchable Platform.

Molybdenum disulfide (MoS2 ) is considered a fascinating material for next-generation semiconducting applications due to its outstanding mechanical stability and direct transition characteristics comparable to silicon. However, its application to stretchable platforms still is a challenging issue in wearable logic devices and sensors with noble form-factors required for future industry. Here, an omnidirectionally stretchable MoS2 platform with laser-induced strained structures is demonstrated. The laser patterning induces the pyrolysis of MoS2 precursors as well as the weak adhesion between Si and SiO2 layers. The photothermal expansion of the Si layer results in the crumpling of SiO2 and MoS2 layers and the field-effect transistors with the crumpled MoS2 are found to be suitable for strain sensor applications. The electrical performance of the crumpled MoS2 depends on the degree of stretching, showing the stable omnidirectional stretchability up to 8% with approximately four times higher saturation current than its initial state. This platform is expected to be applied to future electronic devices, sensors, and so on.

Gradual Edge Contact between Mo and MoS2 Formed by Graphene-Masked Sulfurization for High-Performance Field-Effect Transistors.

Two-dimensional materials have attracted great attention for their outstanding electronic properties. In particular, molybdenum disulfide (MoS2) shows great potential as a next-generation semiconductor due to its tunable direct bandgap with a high on-off ratio and extraordinary stability. However, the performance of MoS2 synthesized by physical vapor deposition has been limited by contact resistance between an electrode and MoS2, which determines overall device characteristics. Here, in order to reduce the contact resistance, we use in situ sulfurization of Mo by H2S gas treatment masked by a patterned graphene gas barrier, so that the Mo channel area can be selectively formed, resulting in a gradual edge contact between Mo and MoS2. Compared with field-effect transistors with a top contact between the Au/Ti electrode and the MoS2 channel, a gradual edge contact between the Mo electrode and the MoS2 channel provides a considerably enhanced electrical performance.

Facile Synthesis of N-Doped Graphene Quantum Dots as Novel Transfection Agents for mRNA and pDNA.

In the wake of the coronavirus disease 2019 (COVID-19) pandemic, global pharmaceutical companies have developed vaccines for the severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2). Some have adopted lipid nanoparticles (LNPs) or viral vectors to deliver the genes associated with the spike protein of SARS-CoV-2 for vaccination. This strategy of vaccination by delivering genes to express viral proteins has been successfully applied to the mRNA vaccines for COVID-19, and is also applicable to gene therapy. However, conventional transfection agents such as LNPs and viral vectors are not yet sufficient to satisfy the levels of safety, stability, and efficiency required for the clinical applications of gene therapy. In this study, we synthesized N-doped graphene quantum dots (NGQDs) for the transfection of various genes, including messenger ribonucleic acids (mRNAs) and plasmid deoxyribonucleic acids (pDNAs). The positively charged NGQDs successfully formed electrostatic complexes with negatively charged mRNAs and pDNAs, and resulted in the efficient delivery and transfection of the genes into target cells. The transfection efficiency of NGQDs is found to be comparable to that of commercially available LNPs. Considering their outstanding stability even at room temperature as well as their low toxicity, NGQDs are expected to be novel universal gene delivery platforms that can outperform LNPs and viral vectors.

Photoinitiated Polymerization of Hydrogels by Graphene Quantum Dots.

As a smart stimulus-responsive material, hydrogel has been investigated extensively in many research fields. However, its mechanical brittleness and low strength have mattered, and conventional photoinitiators used during the polymerization steps exhibit high toxicity, which limits the use of hydrogels in the field of biomedical applications. Here, we address the dual functions of graphene quantum dots (GQDs), one to trigger the synthesis of hydrogel as photoinitiators and the other to improve the mechanical strength of the as-synthesized hydrogel. GQDs embedded in the network effectively generated radicals when exposed to sunlight, leading to the initiation of polymerization, and also played a significant role in improving the mechanical strength of the crosslinked chains. Thus, we expect that the resulting hydrogel incorporated with GQDs would enable a wide range of applications that require biocompatibility as well as higher mechanical strength, including novel hydrogel contact lenses and bioscaffolds for tissue engineering.

Cloning-independent expression and screening of enzymes using cell-free protein synthesis systems.

We present a strategy for expression and screening of microbial enzymes without involving cloning procedures. Libraries of putative ω-transaminases (ω-TA) and mutated Candida antarctica lipase B (CalB) are PCR-amplified from bacterial colonies and directly expressed in an Escherichia coli-based cell-free protein synthesis system. The open nature of cell-free protein synthesis system also allows streamlined analysis of the enzymatic activity of the expressed enzymes, which greatly shortens the time required for enzyme screening. We expect that the proposed strategy will provide a universal platform for bridging the information gap between nucleotide sequence and protein function, in order to accelerate the discovery of novel enzymes. The proposed strategy can also serve as a viable option for the rapid and precise tuning of enzyme molecules, not only for analytical purposes, but also for industrial applications. This is accomplished via large-scale production using microbial cells transformed with variant genes selected from the cell-free expression screening.

Does press-fit technique reduce tunnel volume enlargement after anterior cruciate ligament reconstruction with autologous hamstring tendons? A prospective randomized computed tomography study.

PURPOSE: The purpose of this prospective, randomized, computed tomography-based study was to investigate whether the press-fit technique reduces tunnel volume enlargement (TVE) and improves the clinical outcome after anterior cruciate ligament reconstruction at a minimum follow-up of 1 year compared with conventional technique. METHODS: Sixty-nine patients undergoing primary ACL reconstruction using hamstring autografts were randomly allocated to either the press-fit technique group (group A) or conventional technique group (group B). All patients were evaluated for TVE and tunnel widening using computed tomography scanning, for functional outcome using International Knee Documentation Committee and Lysholm scores, for rotational stability using the pivot-shift test, and for anterior laxity using the KT-2000 arthrometer at a minimum of 1-year follow-up. RESULTS: There were no significant differences in TVE between the 2 groups. In group A, in which the press-fit technique was used, mean volume enlargement in the femoral tunnel was 65% compared with 71.5% in group B (P = .84). In group A, 57% (20 of 35) of patients developed femoral TVE compared with 67% (23 of 34) of patients in group B (P = .27). Both groups showed no significant difference for functional outcome (mean Lysholm score P = .73, International Knee Documentation Committee score P = .15), or knee laxity (anterior P = .78, rotational P = .22) at a minimum follow-up of 1 year. CONCLUSIONS: In a comparison of press-fit and conventional techniques, there were no significant differences in TVE and clinical outcome at short-term follow-up. LEVEL OF EVIDENCE: Level II, therapeutic study, prospective randomized clinical trial.

Incidence of bilateral discoid lateral meniscus in an Asian population: an arthroscopic assessment of contralateral knees.

PURPOSE: To investigate the incidence of bilateral discoid lateral meniscus (DLM) and to evaluate the arthroscopic features of lateral meniscus in asymptomatic contralateral knees in an Asian population who presented with symptomatic DLMs. METHODS: This study prospectively enrolled 52 consecutive patients who underwent arthroscopic procedures for symptomatic DLMs (31 complete and 21 incomplete) and who consented to the examination of the contralateral knee at the time of arthroscopy. Types of DLMs and of meniscus tears were assessed by use of arthroscopic findings. Preoperative and postoperative functional outcomes were evaluated with Lysholm and Tegner activity scores. RESULTS: Arthroscopic examinations showed 21 complete DLMs, 19 incomplete DLMs, 11 normal lateral menisci, and 1 ring-shaped lateral meniscus in contralateral knees. The incidence of bilateral DLM in our study population was 79% (41 of 52 contralateral knees). Furthermore, 65% of patients (34 pairs of knees) had the same DLM types. In addition, 3 pairs of knees with complete DLMs had menisci of different thicknesses. DLM tears were observed in 2 contralateral knees (1 radial and 1 longitudinal) and were treated by partial central meniscectomy. CONCLUSIONS: This study provides evidence of the high prevalence of bilateral DLM in an Asian population.

Cell-free synthesis and multifold screening of Candida antarctica lipase B (CalB) variants after combinatorial mutagenesis of hot spots.

We have developed a strategy for rapid and combinatorial optimization of the hot spot residues of enzymes. After combinatorial randomization of target locations in the Candida antarctica lipase B (CalB) gene, the individual variant genes isolated in the E.coli cells were expressed in the cell-free protein synthesis system to analyze different parameters of the resulting CalB variants. The enzymatic assays for the hydrolysis of para-nitrophenyl-ester (pNP-ester) and triglyceride, synthesis of wax ester, and thermal stability of the variant enzymes were carried out simultaneously in 96-well microtiter plates. From the 1,000 variant genes tested in each assay, we were able to identify a series of the variant enzymes having markedly improved hydrolytic, synthetic activity, or thermal stability. The improved traits of the cell-free selected CalB variants were well reproduced when the corresponding genes were expressed in Pichia pastoris. Therefore, we expect that the proposed strategy of cell-free expression screening can serve as a viable option for rapid and precise tuning of enzyme molecules, not only for analytical purposes but also for industrial applications through large scale production using microbial cells transformed with variant genes selected from the cell-free expression screening.