Self-Assembly of Strain-Adaptable Surface-Enhanced Raman Scattering Substrate on Polydimethylsiloxane Nanowrinkles.

Flexible surface-enhanced Raman scattering (SERS) substrates adaptable to strains enable effective sampling from irregular surfaces, but the preparation of highly stable and sensitive flexible SERS substrates is still challenging. This paper reports a method to fabricate a high-performance strain-adaptable SERS substrate by self-assembly of Au nanoparticles (AuNPs) on polydimethylsiloxane (PDMS) nanowrinkles. Nanowrinkles are created on prestrained PDMS slabs by plasma-induced oxidation followed by the release of the prestrain, and self-assembled AuNPs are transferred onto the nanowrinkles to construct the high-performance SERS substrate. The results show that the nanowrinkled structure can improve the surface roughness and enhance the SERS signals by ∼4 times compared to that of the SERS substrate prepared on flat PDMS substrates. The proposed SERS substrate also shows good adaptability to dynamic bending up to ∼|0.4| 1/cm with excellent testing reproducibility. Phenolic pollutants, including aniline and catechol, were quantitatively tested by the SERS substrate. The self-assembled flexible SERS substrate proposed here provides a powerful tool for chemical analysis in the fields of environmental monitoring and food safety inspection.

Modification of the electrokinetic motion of microalgae through light illumination for viability assessment.

The viability detection of microalgae with the electrokinetic (EK) technique shows vast applications in the biology and maritime industry. However, due to the slight variations in the EK properties between alive and dead microalgae cells, the accuracy and practicability of this technique is limited. In this paper, the light illumination pretreatment was conducted to modify the EK velocity of microalgae for enhancing the EK difference. The effects of the illumination time and light color on the EK velocities of Chlorella vulgaris and Isochrysis galbana were systematically measured, and the EK differences between alive and dead cells were calculated and compared. The results indicate that under light illumination, the photosynthesis of the alive cells leads to the amplification of the zeta potential, leading toward increase in the EK difference along with the illumination time. By using light with different color spectra to treat the microalgae, it was found that the EK difference changes with the light color according to the following order: white light > red light > blue light > green light. The difference in EK potential with exposure to white light treatment surpasses over 10-fold in comparison to those without such treatment. The light pretreatment technique, as illustrated in this study, offers an advantageous strategy to enhance the EK difference between living and dead cells, proving beneficial in the field of microalgae biotechnology.

Identification of marine microplastics based on laser-induced fluorescence and principal component analysis.

Although the laser-induced fluorescence method shows great potential for microplastic particle detection, overlapping fluorescence signals make accurate type and proportion identification difficult. This paper presents the identification of marine microplastics based on laser-induced fluorescence and principal component analysis. This method works by measuring the fluorescence spectra of water-containing microplastic samples irradiated with a 405-nm laser, which are then analyzed using the principal component analysis (PCA) method. The nine types of microplastics were differentiated based on their positions in the PCA score plot. The mixed sample was positioned between the pure microplastic samples. The component ratio determines its position relative to that of the pure microplastic samples. The first two principal components of the mixed microplastics were linearly dependent. Natural seawater had less influence on the detection, and a mass concentration as low as 0.03% was detected.

Electrokinetic Effect of a Two-Liquid Interface within a Slit Microchannel.

This paper presents an investigation of the electrokinetic effect at a two-liquid (immiscible liquid-aqueous solution) interface within a slit microchannel using a three-dimensional (3D) numerical model, with a particular focus on the impact of the surface ζ-potential and liquid phase height on the interface electrokinetic velocity. The findings indicate that the direction of the interface movement depends on the ζ-potentials at the two-liquid interface and the microchannel wall. When the absolute value of the negative ζ-potential at the interface is smaller than that at the wall, the interface moves toward the negative pole of the applied direct current (DC) electric field; conversely, it moves in the opposite direction. The velocity of interface motion decreases as the height of the aqueous phase and the dynamic viscosity ratio between the immiscible liquid and the aqueous solution increase. Conversely, the velocity increases with an elevation in the height of the immiscible liquid phase and the DC electric field intensity. This study holds significant importance in elucidating the patterns of change in fluid interface electrokinetic effects and their potential applications in manipulating and separating particulate pollutants within water systems.

Surface charging and electrophoretic behavior of conductive polymer micro-droplets in conductive polymer liquid solutions.

This study investigates the surface charging and electrophoretic motion of polyethylene glycol-rich (PEG-rich) micro-droplets in dextran-rich solutions or dextran-rich micro-droplets in PEG-rich solutions. The electrophoretic velocities of the droplets were measured in a centimeter-sized chamber under an optical microscope. It was found that the direction of electrophoretic motion of both the PEG-rich droplets and dextran-rich droplets is opposite to the applied electric field, meaning that both the PEG-rich droplets and dextran-rich droplets are negatively charged. The electrophoretic velocity is independent of droplet size but proportional to the electric field strength. Increasing the NaCl concentration reduces the electrophoretic velocity of PEG-rich droplets and increases it for dextran-rich droplets, suggesting different surface charge changes due to ion affinity. The charge densities and velocities are affected by the PEG and dextran mass fractions. Physical models for droplet surface charging under different conditions were proposed to explain the experimental results.

Recent Development and Applications of Stretchable SERS Substrates.

Surface-enhanced Raman scattering (SERS) is a cutting-edge technique for highly sensitive analysis of chemicals and molecules. Traditional SERS-active nanostructures are constructed on rigid substrates where the nanogaps providing hot-spots of Raman signals are fixed, and sample loading is unsatisfactory due to the unconformable attachment of substrates on irregular sample surfaces. A flexible SERS substrate enables conformable sample loading and, thus, highly sensitive Raman detection but still with limited detection capabilities. Stretchable SERS substrates with flexible sample loading structures and controllable hot-spot size provide a new strategy for improving the sample loading efficiency and SERS detection sensitivity. This review summarizes and discusses recent development and applications of the newly conceptual stretchable SERS substrates. A roadmap of the development of SERS substrates is reviewed, and fabrication techniques of stretchable SERS substrates are summarized, followed by an exhibition of the applications of these stretchable SERS substrates. Finally, challenges and perspectives of the stretchable SERS substrates are presented. This review provides an overview of the development of SERS substrates and sheds light on the design, fabrication, and application of stretchable SERS systems.

CO2 laser combined with low-temperature plasma radiofrequency ablation promotes recovery of swallowing function in elderly patients with early glottic carcinoma.

OBJECTIVE: This study was designed to determine the effect of CO2 laser combined with low-temperature plasma radiofrequency ablation (LPRA) on swallowing function and prognosis in elderly patients with early glottic laryngeal cancer (GLC). METHODS: The clinical data of 115 elderly patients with early GLC treated in General Hospital of Daqing Oil Field from May 2013 to September 2015 were retrospectively analyzed. These patients were assigned to a research group or control group according to different therapeutic regimen. Totally 56 cases treated with CO2 laser resection were assigned to the control group, and 59 cases treated with CO2 laser combined with LPRA were assigned to the research group. The hospital stay, postoperative pain, mucosal recovery score, postoperative complications, swallowing function, vocal function, and 5-year recurrence rate were compared between the two groups. Independent risk factors for 5-year recurrence in patients were analyzed by multivariate logistic regression. RESULTS: The research group was significantly superior to the control group in terms of hospital stay, postoperative pain, and mucosal recovery score (P<0.05), and the postoperative complication rate was not significantly different between the two groups (P>0.05). After treatment, the research group showed better swallowing function and vocal function than the control group, and the 5-year recurrence rate of the two groups was similar (P=0.288). Multivariate logistic regression analysis identified higher age, lower differentiation, and presence of a cumulative anterior commissure as independent risk factors for recurrence. CONCLUSION: CO2 laser combined with LPRA can provide relatively high clinical efficacy for early GLC in the elderly, after which patients' swallowing function and vocal function recover quickly, but the long-term benefit of adding LPRA is not evident.

In-depth understanding of boosting salinity gradient power generation by ionic diode.

Ionic diodes constructed with asymmetric channel geometry and/or charge layout have shown outstanding performance in ion transport manipulation and reverse electrodialysis (RED) energy collection, but the working mechanism is still indistinct. Herein, we systematically investigated RED energy conversion of straight nanochannel-based bipolar ionic diode by coupling the Poisson-Nernst-Planck and Navier-Strokes equations. The effects of nanochannel structure, charging polarity, and symmetricity as well as properties of working fluids on the output voltage and output power were investigated. The results show that as high-concentration feeding solution is applied, the bipolar ionic diode-based RED system gives higher output voltage and output power compared to the unipolar channel RED system. Under optimal conditions, the voltage output of the bipolar channel is increased by ∼100% and the power output is increased by ∼260%. This work opens a new route for the design and optimization of high-performance salinity energy harvester as well as for water desalination.

Electrokinetic transport phenomena in nanofluidics and their applications.

Much progress has been made in the electrokinetic phenomena inside nanochannels in the last decades. As the dimensions of the nanochannels are compatible to that of the electric double layer (EDL), the electrokinetics inside nanochannels indicate many unexpected behaviors, which show great potential in the fields of material science, biology, and chemistry. This review summarizes the recent development of nanofluidic electrokinetics in both fundamental and applied research. First, the techniques for constructing nanochannels are introduced to give a guideline for choosing the optimal fabrication technique based on the specific feature of the nanochannel. Then, the theories and experimental investigations of the EDL, electroosmotic flow, and electrophoresis of nanoparticles inside the nanochannels are discussed. Furthermore, the applications of nanofluidic electrokinetics in iontronics, sensing, and biomolecule separation fields are summarized. In Section 5, some critical challenges and the perspective on the future development of nanofluidic electrokinetics are briefly proposed.

Electrokinetic motion and viability assessment of algae with a polyethylene glycol-dextran interface.

At present, there is still limited report on the electrokinetic (EK) behavior of bioparticles at the interface of an aqueous two-phase system. In this paper, the EK motion and viability assessment of live algae mixed with the NaClO treated dead algae were carried out at the interface formed by polyethylene glycol (PEG)-rich phase and dextran (DEX)-rich phase in a straight microchannel. The experimental results show that both the live and dead algae at the PEG-DEX interface migrate from the negative electrode to the positive electrode, and the EK velocity of live algae at the interface is slightly larger than that of the dead ones with similar diameters. For either live or dead algae, the EK velocity at the interface decreases with the increase in diameter. A size-velocity curve was used to evaluate the viability of the algae. As most of the microorganisms in ballast water are algae, the method in this paper provides a promising way to detect and evaluate the live microorganism in treated ballast water of a ship.

An experimental study of the merging flow of polymer solutions in a T-shaped microchannel.

The merging flow through a T-junction is relevant to sample mixing and particle manipulation in microfluidic devices. It has been extensively studied for Newtonian fluids, particularly in the high inertial regime where flow bifurcation takes place for enhanced mixing. However, the effects of fluid rheological properties on the merging flow have remained largely unexplored. We investigate here the flow of five types of polymer solutions along with water in a planar T-shaped microchannel over a wide range of flow rates for a systematic understanding of the effects of fluid shear thinning and elasticity. It is found that the merging flow near the stagnation point of the T-junction can either be vortex dominated or have unsteady streamlines, depending on the strength of elasticity and shear thinning present in the fluid. Moreover, the shear thinning effect is found to induce a symmetric unsteady flow in comparison to the asymmetric unsteady flow in the viscoelastic fluids, the latter of which exhibits greater interfacial fluctuations.

Recent advances in multimode microfluidic separation of particles and cells.

Microfluidic separation of particles and cells is crucial to lab-on-a-chip applications in the fields of science, engineering, and industry. The continuous-flow separation methods can be classified as active or passive depending on whether the force involved in the process is externally imposed or internally induced. The majority of current separations have been realized using only one of the active or passive methods. Such a single-mode process is usually limited to one-parameter separation, which often becomes less effective or even ineffective when dealing with real samples because of their inherent heterogeneity. Integrating two or more separation methods of either type has been demonstrated to offer several advantages like improved specificity, resolution, and throughput. This article reviews the recent advances of such multimode particle and cell separations in microfluidic devices, including the serial-mode prefocused separation, serial-mode multistage separation, and parallel-mode force-tuned separation.

Carbon electrochemical membrane functionalized with flower cluster-like FeOOH catalyst for organic pollutants decontamination.

Decorating active catalysts on the reactive electrochemical membrane (REM) is an effective way to further improve its decontamination performance. In this work, a novel carbon electrochemical membrane (FCM-30) was prepared through coating FeOOH nano catalyst on a low-cost coal-based carbon membrane (CM) through facile and green electrochemical deposition. Structural characterizations demonstrated that the FeOOH catalyst was successfully coated on CM, and it grew into a flower cluster-like morphology with abundant active sites when the deposition time was 30 min. The nano FeOOH flower clusters can obviously boost the hydrophilicity and electrochemical performance of FCM-30, which enhance its permeability and bisphenol A (BPA) removal efficiency during the electrochemical treatment. Effects of applied voltages, flow rates, electrolyte concentrations and water matrixes on BPA removal efficiency were investigated systematically. Under the operation condition of 2.0 V applied voltage and 2.0 mL·min-1 flow rate, FCM-30 can achieve the high removal efficiency of 93.24% and 82.71% for BPA and chemical oxygen demand (COD) (71.01% and 54.89% for CM), respectively, with only a low energy consumption (EC) of 0.41 kWh·kgCOD-1, which can be ascribed to the enhancement on OH yield and direct oxidation ability by the FeOOH catalyst. Moreover, this treatment system also exhibits good reusability and can be adopted on different water background as well as different pollutants.

Marine Structural Health Monitoring with Optical Fiber Sensors: A Review.

Real-time monitoring of large marine structures' health, including drilling platforms, submarine pipelines, dams, and ship hulls, is greatly needed. Among the various kinds of monitoring methods, optical fiber sensors (OFS) have gained a lot of concerns and showed several distinct advantages, such as small size, high flexibility and durability, anti-electromagnetic interference, and high transmission rate. In this paper, three types of OFS used for marine structural health monitoring (SHM), including point sensing, quasi-distributed sensing, and distributed sensing, are reviewed. Emphases are given to the applicability of each type of the sensors by analyzing the operating principles and characteristics of the OFSs. The merits and demerits of different sensing schemes are discussed, as well as the challenges and future developments in OFSs for the marine SHM field.

A Fiber Bragg Grating Sensor Based on Cladding Mode Resonance for Label-Free Biosensing.

A fiber-optic biosensing platform based on ultra-narrowband cladding mode resonances was developed on a high-reflectivity fiber Bragg grating (FBG) for targeting biomolecular detection. The multiple cladding modes with a high sensitivity to the refractive index (RI) were excited in the FBG by coupling between the forward-propagating guided core mode of the multimode fiber and the backward-propagating guided cladding mode of the FBG without any damage to the fiber structure or any change to the standard FBG manufacturing process. The full width at half maximum and the Q-factor of the typical cladding mode resonance operation of the proposed sensor are 80 pm and 19,270, respectively, which are better than those of most fiber-optic biosensors reported to date. In addition, the FBG sensor demonstrated a high sensitivity in protein detection and a high selectivity in serum sample assays. The sensitivity of this sensor was further increased simply by coating it with graphene oxide (GO) sheets on the sensing surface without using a signal amplification strategy. Furthermore, an ultra-low limit of detection (LOD) of 32 pM was obtained by the GO-coated FBG sensor for IgG detection. The proposed FBG sensor provides a competitive fiber-optic platform for biomolecular detection. It has a great potential for applications in label-free biosensing.

Electrothermal sterilization and self-powered real-time respiratory monitoring of reusable mask based on Ag micro-mesh films.

Since the COVID-19 pandemic outbreaks, the utilization of medical masks plays a critical role in reducing the infected risk. However, constructing multifunctional masks to achieve simultaneously self-sterilization, reusability, and respiratory monitoring capability remains still a huge challenge. Herein, a reusable Ag micro-mesh film-based mask is proposed, which enables the capabilities of electrothermal sterilization and self-powered real-time respiratory monitoring. Highly conductive Ag micro-mesh films prepared by continuous draw spinning method demonstrate excellent electrothermal performances for thermal sterilization and serve as working electrode to fabricate triboelectric nanogenerator (TENG) for real-time respiratory monitoring, respectively. Under a low driving voltage of 3.0 V, the surface temperature of Ag micro-mesh film enables a quick increase to over 60 °C within 30 s, which endows thermal sterilization against S. aureus with antibacterial efficiency of 95.58 % within 20 min to achieve the self-sterilization of medical masks. Furthermore, a self-powered alarm system based on the fabricated TENG as respiratory monitor is developed for real-time respiratory monitoring to render a timely treatment for patients in danger of tachypnea and apnea. Consequently, this work has paved a new and practical avenue to achieve reusable multifunctional masks with capabilities of electrothermal sterilization and real-time respiratory monitoring in clinical medicine.

Electrokinetics in antimicrobial resistance analysis: A review.

Infections caused by antimicrobial resistance are a serious problem in the world. Currently, commercial devices for antimicrobial susceptibility testing and resistant bacteria identification are time-consuming. There is an urgent need to develop fast and accurate methods, especially in the process of sample pretreatment. Electrokinetic (EK) is a family of electric-field-based kinetic phenomena of fluid or embedded objects, and EK applications have been found in various fields. In this paper, EK bacteria manipulation, including enrichment and separation, is reviewed. Focus is given to the rapid electric-based minimum inhibitory concentration measurement. The future directions and major challenges in this field are also outlined.

Lensless computational imaging with a hybrid framework of holographic propagation and deep learning.

Lensless imaging has attracted attention as it avoids the bulky optical lens. Lensless holographic imaging is a type of a lensless imaging technique. Recently, deep learning has also shown tremendous potential in lensless holographic imaging. A labeled complex field including real and imaginary components of the samples is usually used as a training dataset. However, obtaining such a holographic dataset is challenging. In this Letter, we propose a lensless computational imaging technique with a hybrid framework of holographic propagation and deep learning. The proposed framework takes recorded holograms as input instead of complex fields, and compares the input and regenerated holograms. Compared to previous supervised learning schemes with a labeled complex field, our method does not require this supervision. Furthermore, we use the generative adversarial network to constrain the proposed framework and tackle the trivial solution. We demonstrate high-quality reconstruction with the proposed framework compared to previous deep learning methods.

Effects of vertical confinement on the flow of polymer solutions in planar constriction microchannels.

The flow of polymer solutions under extensional conditions is frequently encountered in numerous engineering fields. Planar contraction and/or expansion microchannels have been a subject of interest for many studies in that regard, which, however, have mostly focused on shallow channel structures. We investigate here the effect of changing the depth of contraction-expansion microchannels on the flow responses of three types of polymer solutions and water. The flow of viscoelastic polyethylene oxide (PEO) solution is found to become more stable with suppressed vortex formation and growth in the contraction part while being less stable in the expansion part with the increase of the channel depth. These opposing trends in the contraction and expansion flows are noted to have similarities with our recent findings of constriction length-dependent instabilities in the same PEO solution (M. K. Raihan, S. Wu, Y. Song and X. Xuan, Soft Matter, 2021, 17, 9198-9209), where the contraction flow gets stabilized while the expansion flow becomes destabilized with the increase of the constriction length. In contrast, the entire flow becomes less stable in deeper channels for the shear-thinning xanthan gum (XG) solution as well as the shear thinning and viscoelastic polyacrylamide (PAA) solution. This observation aligns with that of water flow, which is attributed to the reduced top/bottom wall stabilizing effects.

Mechanism and performance of ionic diodes fabricated from 2D trapezoidal-shaped nanochannels.

Bioinspired asymmetric two-dimensional (2D) nanochannels with ionic diode behavior are highly desirable, as they can be constructed and modified easily. However, the knowledge about the rectification mechanism of the nanochannels is still very limited. In this paper, the ionic current rectification (ICR) of the 2D trapezoidal-shaped nanochannels was studied both numerically and experimentally. A multi-physics model, considering the electric field, the ion concentration field, and the flow field, was built for simulating the ion transportation inside the nanochannels. With a limited channel height, the 2D nanochannels are counter-ion selective; therefore, under an external electric field, the accumulation of co-ions takes place at one end of the nanochannels. By introducing shape asymmetry to the nanochannels, the ICR was achieved due to the asymmetric ion concentration polarization at two ends of the nanochannels under opposite electric fields. The structure of the nanochannels, the surface charge density of the nanochannel walls, and the ionic strength of the working fluids affect the ICR of the ionic diodes by changing the ion concentration polarization at two ends of the nanochannels. In the experiment, the current-voltage curves of the nanochannel arrays fabricated by assembling graphene oxide nanosheets were measured, which are in accordance with the numerical results. This paper provides a comprehensive understanding of the mechanism of the 2D trapezoidal-shaped ionic diodes, which may act as a guideline for the design and optimization of ionic diodes.