Charged Black-hole-like Electronic Structure Driven by Geometric Potential of Two-dimensional Semiconductors.

One of the exotic expectations in the two-dimensional (2D) curved spacetime is the geometric potential from the curvature of the 2D space, still possessing unsolved fundamental questions through Dirac quantization. The atomically thin 2D materials are promising for the realization of the geometric potential, but the geometric potential in 2D materials was not identified experimentally. Here, we observed the curvature-induced ring-patterned bound states in structurally deformed 2D semiconductors and formulated the modified geometric potential for the curvature effect, which demonstrates the ring-shape bound states with angular momentum. The formulated modified geometric potential is analogous to the effective potential of a rotating charged black hole. Density functional theory (DFT) and tight-binding calculations were performed, which quantitatively agree well with the results of the modified geometric potential. The modified geometric potential is described by modified Gaussian and mean curvatures, corresponding to the curvature-induced changes in spin-orbit interaction and band gap, respectively. Even for complex structural deformation, the geometric potential solves the complexity, which aligns well with experimental results. The understanding of the modified geometric potential provides us with an intuitive clue for quantum transport and a key factor for new quantum applications such as valleytronics, spintronics, and straintronics in 2D semiconductors. This article is protected by copyright. All rights reserved.

Probing Inherent Optical Anisotropy in Substrates via Direct Nanoimaging of Mie Scattering.

In this study, we investigated the optical properties of a transition metal dichalcogenide (TMD) substrate via Mie-scattering-induced surface analysis (MISA). Employing near-field optical microscopy and finite-difference time-domain (FDTD) simulations, we systemically prove and directly visualize the Mie scattering of superspherical gold nanoparticles (s-AuNPs) at the nanoscale. Molybdenum disulfide substrates exhibited optical isotropy, while rhenium disulfide (ReS2) substrates showed anisotropic behavior attributed to the interaction with incident light's electric field. Our study revealed substantial anisotropic trends in Mie scattering, particularly in the near-infrared energy range, with ReS2 exhibiting more pronounced spectral and angular responses in satellite peaks. Our results emphasize the application of Mie scattering, exploring the optical properties of substrates and contributing to a deeper understanding of nanoscale light-matter interactions.

Charged Exciton Generation by Curvature-Induced Band Gap Fluctuations in Structurally Disordered Two-Dimensional Semiconductors.

Curvature is a general factor for various two-dimensional (2D) materials due to their flexibility, which is not yet fully unveiled to control their physical properties. In particular, the effect of structural disorder with random curvature formation on excitons in 2D semiconductors is not fully understood. Here, the correlation between structural disorder and exciton formation in monolayer MoS2 on SiO2 was investigated by using photoluminescence (PL) and Raman spectroscopy. We found that the curvature-induced charge localization along with band gap fluctuations aid the formation of the localized charged excitons (such as trions). In the substrate-supported region, the trion population is enhanced by a localized charge due to the microscopic random bending strain, while the trion is suppressed in the suspended region which exhibits negligible bending strain, anomalously even though the dielectric screening effect is lower than that of the supported region. The redistribution of each exciton by the bending strain leads to a huge variation (∼100-fold) in PL intensity between the supported and suspended regions, which cannot be fully comprehended by external potential disorders such as a random distribution of charged impurities. The peak position of PL in MoS2/SiO2 is inversely proportional to the Raman peak position of E12g, indicating that the bending strain is correlated with PL. The supported regions exhibit an indirect portion that was not shown in the suspended regions or atomically flat substrates. The understanding of the structural disorder effect on excitons provides a fundamental path for optoelectronics and strain engineering of 2D semiconductors.

Degradation phenomena of quantum dot light-emitting diodes induced by high electric field.

Quantum dots possess exceptional optoelectronic properties, such as narrow bandwidth, controllable wavelength, and compatibility with solution-based processing. However, for efficient and stable operation in electroluminescence mode, several issues require resolution. Particularly, as device dimensions decrease, a higher electric field may be applied through next-generation quantum dot light-emitting diode (QLED) devices, which could further degrade the device. In this study, we conduct a systematic analysis of the degradation phenomena of a QLED device induced by a high electric field, using scanning probe microscopy (SPM) and transmission electron microscopy (TEM). We apply a local high electric field to the surface of a QLED device using an atomic force microscopy (AFM) tip, and we investigate changes in morphology and work function in the Kelvin probe force microscopy mode. After the SPM experiments, we perform TEM measurements on the same degraded sample area affected by the electric field of the AFM tip. The results indicate that a QLED device could be mechanically degraded by a high electric field, and work function changes significantly in degraded areas. In addition, the TEM measurements reveal that In ions migrate from the indium tin oxide (ITO) bottom electrode to the top of the QLED device. The ITO bottom electrode also deforms significantly, which could induce work function variation. The systematic approach adopted in this study can provide a suitable methodology for investigating the degradation phenomena of various optoelectronic devices.

Surgical Outcomes of Simultaneous Cochlear Implantation and Intracochlear Schwannoma Removal.

OBJECTIVE: Intracochlear schwannoma is very rare, and complete loss of hearing is inevitable after the removal of this tumor. Here, we discuss cochlear implantation (CI) performed simultaneously with the removal of an intracochlear schwannoma. STUDY DESIGN: Retrospective single-center study. SETTING: Tertiary medical institute. METHODS: Simultaneous CI and intracochlear schwannoma removal were performed in 4 subjects. After subtotal cochleostomy, the tumors were removed meticulously, with preservation of the modiolus. A new slim modiolar electrode (Nucleus CI632) was placed in a manner that hugged the modiolus. The surgical outcomes of functional gain, word recognition score (WRS), sound localization, and hearing in noise and speech intelligibility tests were investigated. RESULTS: Intracochlear schwannomas were removed successfully from the 4 patients, with no remnant tumor. The mean aided hearing threshold 6 months after surgery was 25.0 ± 1.8 dB, and the mean-aided WRS with a 60 dB stimulus was 36.0 ± 18.8% (range 16%-60%). The Categorical Auditory Performance (CAP) score of the 3 single-sided deafness patients under contralateral ear masking was 7. The CAP score of the patient with bilateral sensorineural hearing loss was 6, which improved from a preoperative score of 0. CONCLUSION: When an intracochlear schwannoma does not completely invade the modiolus, CI with simultaneous tumor removal can be performed successfully, resulting in good hearing performance. A slim modiolar electrode can be placed stably at the modiolus after schwannoma removal.

Single-Crystalline Pyramidal TiCx Particles Grown by Biphase Diffusion Synthesis.

In this study, we present single-crystalline pyramid-shaped (SP) TiCx particles synthesized on a stacked melt (copper)-solid (titanium) substrate using a biphase diffusion synthesis (BDS) method, in which different sizes ranging from nano- to micrometer scale were obtained within the copper melt with the {100} planes exposed to air. Direct observation and further plasma treatment of the pyramids at different self-assembly stages facilitated the investigation of their growth mode, especially in the horizontal plane. The dendritic growth mode along with the edge and corner-shared modes of the SP TiCx particles frozen on the copper surface was investigated. With SP TiCx particles stacked on top, MoS2-based phototransistors exhibited an up to 6-fold photocurrent increase under laser illumination at different wavelengths, which was attributed to the localized surface plasmonic resonance (LSPR) effect. The BDS method is applied for the synthesis of SP TiCx particles, with a detailed investigation of the relevant growth mode and related applications, such as decoration for high-performance photodevices.

Stability-limiting heterointerfaces of perovskite photovoltaics.

Optoelectronic devices consist of heterointerfaces formed between dissimilar semiconducting materials. The relative energy-level alignment between contacting semiconductors determinately affects the heterointerface charge injection and extraction dynamics. For perovskite solar cells (PSCs), the heterointerface between the top perovskite surface and a charge-transporting material is often treated for defect passivation1-4 to improve the PSC stability and performance. However, such surface treatments can also affect the heterointerface energetics1. Here we show that surface treatments may induce a negative work function shift (that is, more n-type), which activates halide migration to aggravate PSC instability. Therefore, despite the beneficial effects of surface passivation, this detrimental side effect limits the maximum stability improvement attainable for PSCs treated in this way. This trade-off between the beneficial and detrimental effects should guide further work on improving PSC stability via surface treatments.

Comb-type polymer-hybridized MXene nanosheets dispersible in arbitrary polar, nonpolar, and ionic solvents.

Solution-based processing of two-dimensional (2D) nanomaterials is highly desirable, especially for the low-temperature large-area fabrication of flexible multifunctional devices. MXenes, an emerging family of 2D materials composed of transition metal carbides, carbonitrides, or nitrides, provide excellent electrical and electrochemical properties through aqueous processing. Here, we further expand the horizon of MXene processing by introducing a polymeric superdispersant for MXene nanosheets. Segmented anchor-spacer structures of a comb-type polymer, polycarboxylate ether (PCE), provide polymer grafting-like steric spacings over the van der Waals range of MXene surfaces, thereby reducing the colloidal interactions by the order of 103, regardless of solvent. An unprecedented broad dispersibility window for Ti3C2Tx MXene, covering polar, nonpolar, and even ionic solvents, was achieved. Furthermore, close PCE entanglements in MXene@PCE composite films resulted in highly robust properties upon prolonged mechanical and humidity stresses.

Monolayer Graphitic Carbon Nitride as Metal-Free Catalyst with Enhanced Performance in Photo- and Electro-Catalysis.

HIGHLIGHTS: The g-C3N4 monolayer in the perfect 2D limit was successfully realized, for the first time, by the well-defined chemical strategy based on the bottom-up process. The most striking evidence was made from Cs-high resolution transmission electron microscopy measurements by observing directly the atomic structure of g-C3N4 unit cell, which was again supported by the corresponding high resolution transmission electron microscopy image simulation results. We demonstrated that the newly prepared g-C3N4 monolayer showed outstanding photocatalytic activity for H2O2 generation as well as excellent electrocatalytic activity for oxygen reduction reaction. The exfoliation of bulk graphitic carbon nitride (g-C3N4) into monolayer has been intensively studied to induce maximum surface area for fundamental studies, but ended in failure to realize chemically and physically well-defined monolayer of g-C3N4 mostly due to the difficulty in reducing the layer thickness down to an atomic level. It has, therefore, remained as a challenging issue in two-dimensional (2D) chemistry and physics communities. In this study, an "atomic monolayer of g-C3N4 with perfect two-dimensional limit" was successfully prepared by the chemically well-defined two-step routes. The atomically resolved monolayer of g-C3N4 was also confirmed by spectroscopic and microscopic analyses. In addition, the experimental Cs-HRTEM image was collected, for the first time, which was in excellent agreement with the theoretically simulated; the evidence of monolayer of g-C3N4 in the perfect 2D limit becomes now clear from the HRTEM image of orderly hexagonal symmetry with a cavity formed by encirclement of three adjacent heptazine units. Compared to bulk g-C3N4, the present g-C3N4 monolayer showed significantly higher photocatalytic generation of H2O2 and H2, and electrocatalytic oxygen reduction reaction. In addition, its photocatalytic efficiency for H2O2 production was found to be the best for any known g-C3N4 nanomaterials, underscoring the remarkable advantage of monolayer formation in optimizing the catalyst performance of g-C3N4.

An Asymmetry Field-Effect Phototransistor for Solving Large Exciton Binding Energy of 2D TMDCs.

The probing of fundamental photophysics is a key prerequisite for the construction of diverse optoelectronic devices and circuits. To date, though, photocarrier dynamics in 2D materials remains unclear, plagued primarily by two issues: a large exciton binding energy, and the lack of a suitable system that enables the manipulation of excitons. Here, a WSe2 -based phototransistor with an asymmetric split-gate configuration is demonstrated, which is named the "asymmetry field-effect phototransistor" (AFEPT). This structure allows for the effective modulation of the electric-field profile across the channel, thereby providing a standard device platform for exploring the photocarrier dynamics of the intrinsic WSe2 layer. By controlling the electric field, this work the spatial evolution of the photocurrent is observed, notably with a strong signal over the entire WSe2 channel. Using photocurrent and optical spectroscopy measurements, the physical origin of the novel photocurrent behavior is clarified and a room-temperature exciton binding energy of 210 meV is determined with the device. In the phototransistor geometry, lateral p-n junctions serve as a simultaneous pathway for both photogenerated electrons and holes, reducing their recombination rate and thus enhancing photodetection. The study establishes a new device platform for both fundamental studies and technological applications.

Genetic Variations within and between Blue Crab (Portunus trituberculatus) Groups.

The five oligonucleotide primers (oligo-primers) turned out a total of 335 fragments (FMs) (52.9%) in the blue crab (Portunus trituberculatus) group alpha and 298 FMs (47.1%) in the crab group beta, with the FM scales range varying from 100 bp to 2,000 bp. The highest band-sharing (BS) value (0.907) was found between individual's no. 19 and no. 20 within the blue crab group beta. Parties in the blue crab group beta (0.601±0.017) had higher BS rates than did parties from the crab group alpha (0.563±0.017) (p<0.05). The polar dendrogram got by the five oligo-primers points out two genetic extents: bundle I (BLUECRAB 01, 03, 04, 05, 06, 08, and 10) and bundle II (BLUECRAB 02, 07, 09. 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, and 22). The OPD-01 primer revealed 22 loci shared by all the examples of the as FMs of 1,000 bp. The oligo-primer OPA-05 made unique loci shared to each group (ULSEG), almost 400 bp and 500 bp, individually, in blue crab group beta. The remaining oligo-primers did not reveal any loci shared by the two crab groups (LSTG). The average number of ULSEG was diverse and 1.6-fold higher in the crab group beta than in the crab group alpha.

Assessment of General Toxicity of the Glycyrrhiza New Variety Extract in Rats.

The Glycyrrhiza radix (Licorice) is one of the most commonly used medicinal plants in Asian countries, such as China, India, and Korea. It has been traditionally used to treat many diseases, including cough, cold, asthma, fatigue, gastritis, and respiratory tract infections. A Glycyrrhiza new variety, Wongam (WG), has been developed by the Korea Rural Development Administration and revealed pharmacological effects. However, the potential adverse effects of WG have not been revealed yet. This study evaluates the general toxicity of the WG extract through a single and repeated oral dose toxicity study in Sprague-Dawley rats. After single oral dose administration, no significant toxicological changes or mortality was observed up to 5000 mg/kg. Over a 4-week repeated oral dose toxicity study, no adverse effects and target organs were observed up to 5000 mg/kg/day. Over a 13-week repeated oral dose toxicity study, no mortality or toxicological changes involving ophthalmology, water consumption, or hematology were observed up to 5000 mg/kg/day. Although other parameters were changed, the alterations in question were not considered toxicologically significant, since responses remained within normal ranges and were not dose-dependent. In conclusion, the no-observed-adverse-effect level (NOAEL) of WG was higher than 5000 mg/kg/day, and no target organs were identified in rats.

Artificial stimulus-response system capable of conscious response.

A stimulus-response system and conscious response enable humans to respond effectively to environmental changes and external stimuli. This paper presents an artificial stimulus-response system that is inspired by human conscious response and is capable of emulating it. The system is composed of an artificial visual receptor, artificial synapse, artificial neuron circuits, and actuator. By incorporating these artificial nervous components, a series of conscious response processes that markedly reduces response time as a result of learning from repeated stimuli are demonstrated. The proposed artificial stimulus-response system offers the promise of a new research field that would aid the development of artificial intelligence-based organs for patients with neurological disorders.

Inhibitory Effect of Quercetin on Propionibacterium acnes-induced Skin Inflammation.

Quercetin is a well-known antioxidant and a plant polyphenolic of flavonoid group found in many fruits, leaves, and vegetables. Propionibacterium acnes is a key skin pathogen involved in the progression of acne inflammation. Although quercetin has been applied to treat various inflammatory diseases, the effects of quercetin on P. acnes-induced skin inflammation have not been explored. This study investigated the effects of quercetin on P. acnes-induced inflammatory skin disease in vitro and in vivo. The results showed that quercetin suppressed the production of pro-inflammatory cytokines in P. acnes-stimulated HaCaT, THP-1 and RAW 264.7 cells. Additionally, quercetin reduced the production of TLR-2 and the phosphorylation of p38, ERK and JNK MAPKs in P. acnes-stimulated HaCaT and THP-1 cells. It also suppressed MMP-9 mRNA levels in two cell lines exposed to P. acnes in vitro. In the case of in vivo, P. acnes was intradermally injected into the ears of mice and it resulted in cutaneous erythema, swelling, and a granulomatous response. Treatment with quercetin markedly reduced ear thickness and swelling. These results suggested that quercetin can be a potential therapeutic agent against P. acnes-induced skin inflammation and may have diverse pharmaceutical and cosmetics applications.

Biologically Plausible Artificial Synaptic Array: Replicating Ebbinghaus' Memory Curve with Selective Attention.

The nature of repetitive learning and oblivion of memory enables humans to effectively manage vast amounts of memory by prioritizing information for long-term storage. Inspired by the memorization process of the human brain, an artificial synaptic array is presented, which mimics the biological memorization process by replicating Ebbinghaus' forgetting curve. To construct the artificial synaptic array, signal-transmitting access transistors and artificial synaptic memory transistors are designed using indium-gallium-zinc-oxide and poly(3-hexylthiophene), respectively. To secure the desired performance of the access transistor in regulating the input signal to the synaptic transistor, the content of gallium in the access transistor is optimized. In addition, the operation voltage of the synaptic transistor is carefully selected to achieve memory-state efficiency. Repetitive learning characterizing Ebbinghaus' oblivion curves is realized using an artificial synaptic array with optimized conditions for both transistor components. This successfully demonstrates a biologically plausible memorization process. Furthermore, selective attention for information prioritization in the human brain is mimicked by selectively applying repetitive learning to a synaptic transistor with a high memory state. The demonstrated biologically plausible artificial synaptic array provides great scope for advancement in bioinspired electronics.

Color-Selective Schottky Barrier Modulation for Optoelectric Logic.

The limitation on signal processes implementable using conventional semiconductor circuits based on electric signals necessitates a revolutionary change in device structures such that they can exploit photons or light. Herein, we introduce optoelectric logic circuits that convert optical signals with different wavelengths corresponding to different colors into binary electric signals. Such circuits are assembled using unit devices in which the electric current through the semiconductor channel is effectively gated by lights of different colors. Color-selective optical modulation of the device is cleverly achieved using graphene decorated with different organic dyes as the electrode of a Schottky diode structure. The drastic change in the electrode work function under illumination induces a change in the height of the Schottky barrier formed at the electrode/semiconductor junction and consequent modulation of the electric current; we term the developed device a photonic barristor. We construct logic circuits using an array of photonic barristors and demonstrate that they execute the functions of conventional NAND and NOR gates from optical input signals.

Probing the Importance of Charge Balance and Noise Current in WSe2/WS2/MoS2 van der Waals Heterojunction Phototransistors by Selective Electrostatic Doping.

Heterojunction structures using 2D materials are promising building blocks for electronic and optoelectronic devices. The limitations of conventional silicon photodetectors and energy devices are able to be overcome by exploiting quantum tunneling and adjusting charge balance in 2D p-n and n-n junctions. Enhanced photoresponsivity in 2D heterojunction devices can be obtained with WSe2 and BP as p-type semiconductors and MoS2 and WS2 as n-type semiconductors. In this study, the relationship between photocurrent and the charge balance of electrons and holes in van der Waals heterojunctions is investigated. To observe this phenomenon, a p-WSe2/n-WS2/n-MoS2 heterojunction device with both p-n and n-n junctions is fabricated. The device can modulate the charge carrier balance between heterojunction layers to generate photocurrent upon illumination by selectively applying electrostatic doping to a specific layer. Using photocurrent mapping, the operating transition zones for the device is demonstrated, allowing to accurately identify the locations where photocurrent generates. Finally, the origins of flicker and shot noise at the different semiconductor interfaces are analyzed to understand their effect on the photoresponsivity and detectivity of unit active area (2.5 µm2, λ = 405 nm) in the p-WSe2/n-WS2/n-MoS2 heterojunction device.

Production of protein hydrolysate from Protaetia brevitarsis seulensis (Kolbe) larvae by enzyme treatment under high pressure.

To improve the industrial use of health-functional materials based on edible insects, the objective of this study was to establish optimal conditions for improving the quality of Protaetia brevitarsis seulensis larval (PBSL) hydrolysates. PBSL was extracted using four methodologies: atmospheric pressure 50 °C-water extraction, atmospheric pressure 95 °C-water extraction, atmospheric pressure 50 °C-water enzymatic hydrolysis, and enzyme treatment under high pressure (HPE). The quality characteristics of soluble solid content, extraction yield, total protein content, protein yield, protein content with low molecular weight (LMW) (< 1kD), and the amino acid composition of hydrolysates were compared based on the different methods. All of the quality characteristics were found to be higher for HPE extracts than for the other extracts. Under optimized HPE conditions, extraction yield, protein yield, protein content with LMW, amino acid content and the content of essential amino acids increased by 3.4, 4.4 1.4 1.5, and 1.3 times respectively, compared to the other methods.

Direct tuning of graphene work function via chemical vapor deposition control.

Besides its unprecedented physical and chemical characteristics, graphene is also well known for its formidable potential of being a next-generation device material. Work function (WF) of graphene is a crucial factor in the fabrication of graphene-based electronic devices because it determines the energy band alignment and whether the contact in the interface is Ohmic or Schottky. Tuning of graphene WF, therefore, is strongly demanded in many types of electronic and optoelectronic devices. Whereas study on work function tuning induced by doping or chemical functionalization has been widely conducted, attempt to tune the WF of graphene by controlling chemical vapor deposition (CVD) condition is not sufficient in spite of its simplicity. Here we report the successful WF tuning method for graphene grown on a Cu foil with a novel CVD growth recipe, in which the CH4/H2 gas ratio is changed. Kelvin probe force microscopy (KPFM) verifies that the WF-tuned regions, where the WF increases by the order of ~250 meV, coexist with the regions of intrinsic WF within a single graphene flake. By combining KPFM with lateral force microscopy (LFM), it is demonstrated that the WF-tuned area can be manipulated by pressing it with an atomic force microscopy (AFM) tip and the tuned WF returns to the intrinsic WF of graphene. A highly plausible mechanism for the WF tuning is suggested, in which the increased graphene-substrate distance by excess H2 gases may cause the WF increase within a single graphene flake. This novel WF tuning method via a simple CVD growth control provides a new direction to manipulate the WF of various 2-dimensional nanosheets as well as graphene.

Xanthone suppresses allergic contact dermatitis in vitro and in vivo.

Xanthone is a phenolic compound found in a few higher plant families; it has a variety of biological activities, including antioxidant, anti-inflammatory, and anticancer properties. However, the molecular and cellular mechanisms underlying the activity of xanthone in allergic contact dermatitis (ACD) remain to be explored. Therefore, this study aimed to investigate the regulatory effects of xanthone in ACD in human keratinocytes (HaCaT cell), and human mast cell line (HMC-1 cell) in vitro and in an experimental murine model. The results demonstrated that treatment with xanthone reduced the production of pro-inflammatory cytokines and chemokines including interleukin (IL)-1ß, IL-6, IL-8, and expression of chemokines thymus and activation-regulated chemokine (TARC) and macrophage-derived chemokine (MDC) in tumor necrosis factor (TNF)-α and interferon (IFN)-γ-stimulated HaCaT cells. Xanthone also suppressed the production of pro-inflammatory cytokines, chemokines, and allergic mediators in phorbol myristate acetate/A23187 calcium ionophore (PMACI)-stimulated HMC-1 cells. Xanthone significantly suppressed the phosphorylation of mitogen-activated protein kinases (MAPKs) and nuclear factor-kappa B (NF-κB) and activation of caspase-1 signaling pathway in vitro model. Additionally, xanthone administration alleviated 2,4-dinitrofluorobenzene (DNFB)-induced atopic dermatitis like-skin lesion by reducing the serum levels of immunoglobulin E (IgE), histamine, and pro-inflammatory cytokines and suppressing MAPKs phosphorylation. Xanthone administration also inhibited mortality due to compound 48/80-induced anaphylactic shock and suppressed the passive cutaneous anaphylaxis (PCA) reaction mediated by IgE. Collectively, these results suggest that xanthone has a potential for use in the treatment of allergic inflammatory diseases.