ABSTRACT
Benzene is a carcinogenic pollutant with significant emission sources present in the atmosphere. The need for accurate and precise measurement of benzene in the atmosphere has become increasingly evident due to its toxicity and the adverse health effects associated with exposure to different concentrations. Certified reference material (CRM) is essential to establish the traceability of measurement results. The present review compiles the available national and international measurement methods, certified reference materials (CRMs) for benzene and the limit of benzene in fuel composition (v/v) worldwide. Overall, the review indicates the benzene level in the atmosphere and the resulting impacts on the environment and human health, which frequently exceed the exposure limits of different environment regulatory agencies. An extensive literature review was conducted to gather information on monitoring and analysis methods for benzene, revealing that the most preferred method, i.e. Gas Chromatography- Flame Ionization Detector and Mass Spectrometry, is neither cost-effective nor suitable for real-time continuous monitoring. By analysing existing literature and studies, this review will shed light on the understanding of the importance of benzene pollution monitoring in ambient air and its implications for public health. Additionally, it will reflect the mitigation strategies applied by regulators & need for future revisions of air quality guidelines.
ABSTRACT
The extensive emissions of black carbon (BC) from the Indo-Gangetic Plain (IGP) region of India have been well recognized. Particularly, biomass emissions from month-specific crop-residue burning (April, May, October, November) and heating activities (December-February) are considered substantial contributors to BC emissions in the IGP. However, their precise contribution to ambient BC aerosol has not been quantified yet and remains an issue of debate. Therefore, this study aims to fill this gap by quantifying the contribution of these month-specific biomass emissions to ambient BC at an urban site in IGP. This study presents the analysis of BC mass concentrations (MBC) measured for 3 years (2020-2022) in Delhi using an optical photometer i.e., continuous soot monitoring system (COSMOS). A statistical analysis of monthly mean MBC and factors affecting the MBC (ventilation coefficients, air mass back trajectories, fire counts) is performed to derive month-wise contribution due to background concentration, conventional emission, regional transport, crop-residue burning, and heating activities. The yearly mean MBC (5.3 ± 4.7, 5.6 ± 5.0, and 5.3 ± 3.5 µg m-3 during 2020, 2021, and 2022, respectively) remained relatively consistent with repetitive monthly patterns in each year. The peak concentrations were observed from November to January and low concentrations from June to September. Anthropogenic activities contributed significantly to MBC over Delhi with background concentration contributing only 30 % of observed MBC. The percentage contribution of emissions from crop-residue burning varied from 15 % (May) to 37 % (November), while the contribution from heating activities ranged from 25 % (December) to 39 % (January). This source quantification study highlights the significant impact of month-specific biomass emissions in the IGP and can play a vital role in better management and control of these emissions in the region.
ABSTRACT
Vehicular emissions are considered one of the major anthropogenic sources of greenhouse gases and poor air quality in metropolitan cities. This study aims to see the correlation of CO2, CH4, and CO through monitoring over a period from December 2020 to October 2021 covering three seasons' winter, summer, and monsoon at two different traffic locations of Delhi having different traffic volumes, road patterns, and traffic management. The annual average morning concentration of CO2, CH4 and CO was found (533 ± 105), (7.3 ± 3.1), (10.7 ± 3.0) ppm at Najafgarh and (480 ± 70), (5.2 ± 1.8), (7.8 ± 2.8) ppm at Rajendra Place, respectively. A relationship between concentration of all three gases and meteorological parameters such as temperature, humidity, wind speed and wind direction has also been investigated using Pearson correlation coefficient and pollution rose diagram. A comparable pattern in concentration was observed for all three gases in spatial (location) and temporal (diurnal) distribution. The concentration trend of CO2 in different seasons is winter > summer > monsoon, while in the case of CH4 winter = summer > monsoon but not any seasonal trend was noted in CO case. It is observed that CO2 has a good relation with CO (a tracer for vehicular emission) in terms of diurnal variation, whereas, CH4 does not represent a relation with CO and CO2 diurnally, suggesting that vehicles are the source of CO2 but not much contributing to other greenhouse gases like CH4.
Subject(s)
Air Pollutants , Greenhouse Gases , Greenhouse Gases/analysis , Carbon Dioxide/analysis , Methane/analysis , Vehicle Emissions/analysis , Gases , Seasons , India , Environmental Monitoring , Air Pollutants/analysisABSTRACT
Benzene is the most toxic and hazardous pollutant among volatile organic compounds (VOCs), as it comes under group 1 carcinogens recognized by the International Agency for Research on Cancer (IARC). It also plays a significant role in forming secondary pollutants like ozone. The benzene concentration was measured using a charcoal sorbent tube by active sampling at a traffic junction and analysis was done using GC-FID. The maximum average concentration of benzene in ambient air was found to be 33 µg/m3. A diurnal study of benzene measurement shows higher benzene concentrations in the evening compared to the morning. Seasonal variation of benzene is found to be winter > spring > summer > autumn > monsoon and OFP was found to be 21, 19, 14, 13, and 10 respectively. Cancer (ILCR) and non-cancer (HQ) health risk assessment was done to determine the impact of ambient benzene on the residents of urban areas. The yearly average value of ILCR was found to be 2×10-6 ± 1×10-6 which ranges from acceptable value to three times the WHO acceptable value i.e 1×10-6. The correlation of ozone and its precursor, benzene with meteorological parameters is also evaluated. The correlation of benzene and ozone with solar radiation shows the influence of photochemical reactions on the levels of benzene and ozone at the study site, although it is low.
ABSTRACT
Considering the significance of PM1 aerosol in assessing health impacts of air pollution, an extensive analysis of PM1 samples collected at an urban site in Delhi is presented in this study. Overall, PM1 contributed to about 50 % of PM2.5 mass which is alarming especially in Delhi where particle mass loadings are usually higher than prescribed limits. Major portion of PM1 consisted of organic matter (OM) that formed nearly 47 % of PM1 mass. Elemental carbon (EC) contributed to about 13 % of PM1 mass, whereas SO42- (16 %), NH4+ (10 %), NO3- (4 %) and Cl- (3 %) were the major inorganic ions present. Sampling was performed in two distinctive campaign periods (in terms of meteorological conditions and heating (fire) activities), during the year 2019, each spanning two-week time, i.e. (i) September 3rd-16th (clean days), and (ii) November 22nd-December 5th (polluted days). Additionally, PM2.5 and black carbon (BC) were measured simultaneously for subsequent analysis. The 24-h averaged mean concentrations of PM2.5 and BC during clean days (polluted days) were 70.6 ± 26.9 and 3.9 ± 1.0 µg m-3 (196 ± 104 and 7.6 ± 4.1 µg m-3), respectively, which were systematically lower (higher) than that of the annual mean (taken from studies conducted at same site in 2019) of 142 and 5.7 µg m-3, respectively. Changes in characteristic ratios (i.e., organic carbon (OC)/elemental carbon (EC) and K+/EC) of chemical species detected in PM1 show an increase in biomass emissions during polluted days. Increase in biomass emission can be attributed to increase in heating practices (burning of biofuels such as wood logs, straw, and cow-dung cake) in- and around- Delhi because of fall in temperature during second campaign. Furthermore, a significant increase in NO3- fraction of PM1 is observed during second campaign which shows fog processing of NOX due to conducive meteorological conditions in winters. Also, comparatively stronger correlation of NO3- with K+ during second campaign (r = 0.98 as compared to r = 0.5 during first campaign) suggests the increased heating practices to be a contributing factor for increased fraction of NO3- in PM1. We observed that during polluted days, meteorological parameters such as dispersion rate also played a major role in intensifying the impact of increased local emissions due to heating activities. Apart from this, change in the direction of regional emission transport to study site and the topology of Delhi are the possible reasons for the elevated pollution level, especially PM1 during winter in Delhi. This study also suggests that black carbon measurement techniques used in current study (optical absorbance with heated inlet and evolved carbon techniques) can be used as reference techniques to determine the site-specific calibration constant of optical photometers for urban aerosol.
Subject(s)
Air Pollutants , Particulate Matter , Particulate Matter/analysis , Air Pollutants/analysis , Environmental Monitoring , Seasons , Aerosols/analysis , Carbon/analysis , Soot/analysis , IndiaABSTRACT
As a result of rapid industrialization several chemical forms of organic and inorganic mercury are constantly introduced to the environment and affect humans and animals directly. All forms of mercury have toxic effects; therefore accurate measurement of mercury is of prime importance especially in suspended particulate matter (SPM) collected through high volume sampler (HVS). In the quantification of mercury in SPM samples several steps are involved from sampling to final result. The quality, reliability and confidence level of the analyzed data depends upon the measurement uncertainty of the whole process. Evaluation of measurement uncertainty of results is one of the requirements of the standard ISO/IEC 17025:2005 (European Standard EN IS/ISO/IEC 17025:2005, issue1:1-28, 2006). In the presented study the uncertainty estimation in mercury determination in suspended particulate matter (SPM) has been carried out using cold vapor Atomic Absorption Spectrometer-Hydride Generator (AAS-HG) technique followed by wet chemical digestion process. For the calculation of uncertainty, we have considered many general potential sources of uncertainty. After the analysis of data of seven diverse sites of Delhi, it has been concluded that the mercury concentration varies from 1.59 ± 0.37 to 14.5 ± 2.9 ng/m(3) with 95% confidence level (k = 2).
ABSTRACT
BACKGROUND: A conventional gravimetry and electro-gravimetry study has been carried out for the precise and accurate purity determination of lead (Pb) in high purity lead stick and for preparation of reference standard. Reference materials are standards containing a known amount of an analyte and provide a reference value to determine unknown concentrations or to calibrate analytical instruments. A stock solution of approximate 2 kg has been prepared after dissolving approximate 2 g of Pb stick in 5% ultra pure nitric acid. From the stock solution five replicates of approximate 50 g have been taken for determination of purity by each method. The Pb has been determined as PbSO4 by conventional gravimetry, as PbO2 by electro gravimetry. The percentage purity of the metallic Pb was calculated accordingly from PbSO4 and PbO2. RESULTS: On the basis of experimental observations it has been concluded that by conventional gravimetry and electro-gravimetry the purity of Pb was found to be 99.98 ± 0.24 and 99.97 ± 0.27 g/100 g and on the basis of Pb purity the concentration of reference standard solutions were found to be 1000.88 ± 2.44 and 1000.81 ± 2.68 mg kg-1 respectively with 95% confidence level (k = 2). The uncertainty evaluation has also been carried out in Pb determination following EURACHEM/GUM guidelines. The final analytical results quantifying uncertainty fulfills this requirement and gives a measure of the confidence level of the concerned laboratory. CONCLUSIONS: Gravimetry is the most reliable technique in comparison to titremetry and instrumental method and the results of gravimetry are directly traceable to SI unit. Gravimetric analysis, if methods are followed carefully, provides for exceedingly precise analysis. In classical gravimetry the major uncertainties are due to repeatability but in electro-gravimetry several other factors also affect the final results.
ABSTRACT
Six unsymmetrical diorganyltellurium(IV) dichlorides RR'TeCl2 (where R= phenacyl-, 1-naphthacyl-, and styrylacyl- and R' = p-methoxyphenyl, p-hydroxyphenyl-, and 3-methyl-4-hydoxyphenyl-) were tested for their antibacterial activity against gram-positive (Bacillus subtilis ATCC 6633 and Staphylococcus aureus ATCC 25923) and gram-negative (Escherichia coli ATCC 25922. Pseudomonas aeruginosa ATCC 27853 and Salmonella sp.) bacteria. Antibacterial activity was measured by disk diffusion method. Inhibition zones demonstrated that all the compounds showed good activity against gram-negative strains. Phenacyl (3-methyl-4-hydroxyphenyl) tellurium(IV) dichloride and naphthacyl (3-methyl-4-hydroxyphenyl) tellurium(IV) dichloride showed significant activity against both gram-positive and gram-negative strains. Among the tested compounds, the former exhibited maximum activity against gram-positive bacteria, while the latter against all the bacteria under study and styrylacyl (p-methoxyphenyl) tellurium(IV) dichloride against all the three gram-negative bacteria.