Purification and characterization of two distinct acidic phytases with broad pH stability from Aspergillus niger NCIM 563.

Aspergillus niger NCIM 563 produced two different extracellular phytases (Phy I and Phy II) under submerged fermentation conditions at 30°C in medium containing dextrin-glucose-sodium nitrate-salts. Both the enzymes were purified to homogeneity using Rotavapor concentration, Phenyl-Sepharose column chromatography and Sephacryl S-200 gel filtration. The molecular mass of Phy I and II as determined by SDS-PAGE and gel filtration were 66, 264, 150 and 148 kDa respectively, indicating that Phy I consists of four identical subunits and Phy II is a monomer. The pI values of Phy I and II were 3.55 and 3.91, respectively. Phy I was highly acidic with optimum pH of 2.5 and was stable over a broad pH range (1.5-9.0) while Phy II showed a pH optimum of 5.0 with stability in the range of pH 3.5-9.0. Phy I exhibited very broad substrate specificity while Phy II was more specific for sodium phytate. Similarly Phy II was strongly inhibited by Ag(+), Hg(2+) (1 mM) metal ions and Phy I was partially inhibited. Peptide analysis by Mass Spectrometry (MS) MALDI-TOF also indicated that both the proteins were totally different. The K(m) for Phy I and II for sodium phytate was 2.01 and 0.145 mM while V(max) was 5,018 and 1,671 µmol min(-1) mg(-1), respectively. The N-terminal amino acid sequences of Phy I and Phy II were FSYGAAIPQQ and GVDERFPYTG, respectively. Phy II showed no homology with Phy I and any other known phytases from the literature suggesting its unique nature. This, according to us, is the first report of two distinct novel phytases from Aspergillus niger.

Strain improvement and up scaling of phytase production by Aspergillus niger NCIM 563 under submerged fermentation conditions.

Combination of physical and chemical mutagenesis was used to isolate hyper secretory strains of Aspergillus niger NCIM 563 for phytase production. Phytase activity of mutant N-1 and N-79 was about 17 and 47% higher than the parent strain. In shake flask the productivity of phytase in parent, mutant N-1 and N-79 was 6,181, 7,619 and 9,523 IU/L per day, respectively. Up scaling of the fermentation from shake flask to 3 and 14 L New Brunswick fermenter was studied. After optimizing various fermentation parameters like aeration, agitation and carbon source in fermentation medium the fermentation time to achieve highest phytase activity was reduced considerably from 14 days in shake flask to 8 days in 14 L fermenter. Highest phytase activity of 80 IU/ml was obtained in 1% rice bran-3.5% glucose containing medium with aeration 0.2 vvm and agitation 550 rpm at room temperature on 8th day of fermentation. Addition of either bavistin (0.1%), penicillin (0.1%), formalin (0.2%) and sodium chloride (10%) in fermented broth were effective in retaining 100% phytase activity for 8 days at room temperature while these reagents along with methanol (50%) and ethanol (50%) confer 100% stability of phytase activity at 4 degrees C till 20 days. Among various carriers used for application of phytase in feed, wheat bran and rice bran were superior to silica and calcium carbonate. Thermo stabilization studies indicate 100% protection of phytase activity in presence of 12% skim milk at 70 degrees C, which will be useful for its spray drying.

Cloning, characterization and expression of the chitinase gene of Enterobacter sp. NRG4.

A chitinase producing bacterium Enterobacter sp. NRG4, previously isolated in our laboratory, has been reported to have a wide range of applications such as anti-fungal activity, generation of fungal protoplasts and production of chitobiose and N-acetyl D-glucosamine from swollen chitin. In this paper, the gene coding for Enterobacter chitinase has been cloned and expressed in Escherichia coli BL21(DE3). The structural portion of the chitinase gene comprised of 1686 bp. The deduced amino acid sequence of chitinase has high degree of homology (99.0%) with chitinase from Serratia marcescens. The recombinant chitinase was purified to near homogeneity using His-Tag affinity chromatography. The purified recombinant chitinase had a specific activity of 2041.6 U mg(-1). It exhibited similar properties pH and temperature optima of 5.5 and 45°C respectively as that of native chitinase. Using swollen chitin as a substrate, the K(m), k(cat) and catalytic efficiency (k(cat)/K(m)) values of recombinant chitinase were found to be 1.27 mg ml(-1), 0.69 s(-1) and 0.54 s(-1)M(-1) respectively. Like native chitinase, the recombinant chitinase produced medicinally important N-acetyl D-glucosamine and chitobiose from swollen chitin and also inhibited the growth of many fungi.

Extracellular amylase production by Saccharomycopsis capsularis and its evaluation for starch saccharification.

A strain of starch-assimilating yeast, Saccharomycopsis capsularis, isolated from Indian cereal-based fermented foods, produced significant levels of extracellular alpha-amylase and glucoamylase. The enzymes reached their peak activities during the stationary phase at the end of the 5th and 4th day of cultivation, respectively. The amylase yields were maximized by a proper choice of carbon and nitrogen sources, starting pH of the culture medium and growth temperature. High activities of the enzymes were obtained through inexpensive agricultural commodities, such as wheat bran and corn meal as carbon sources, and defatted soybean meal and peanut meal as nitrogen sources. A temperature of 28-32 degrees C and an initial pH of 4.5-5.0 were optimum. The crude amylase mixture could liquefy and saccharify a 1% starch solution completely in 24 h at 50 degrees C.

Role of yeast domination in Indian idli batter fermentation.

Adding Saccharomyces cerevisiae, along with natural bacterial flora of the ingredients, was the best method for standardizing idli termentation in terms of improved organoleptic characteristics, leavening and nutritional constituents.

Separation and characterization of standard propoxyphene diastereomers and their determination in pharmaceutical and illicit preparations.

Due to the existence of 2 asymmetric carbon atoms in the propoxyphene molecule, there are 4 diastereomers: alpha dextro, alpha levo, beta dextro, and beta levo. Only alpha-d-propoxyphene is included under the federal Controlled Substances Act. Baseline separations of propoxyphene from various incipients (aspirin, caffeine, phenacetin, and acetaminophen) present in pharmaceutical and illicit preparations, and between the alpha and beta diastereomers, were achieved by high pressure liquid chromatography. The column eluant was collected and propoxyphene was extracted. The optical isomers were differentiated and characterized by melting points and by chemical microcrystalline tests. Using hot stage thermomicroscopy, the eutectic melting points of binary isomeric mixtures of propoxyphene bases and salts were found to be depressed about 10 degrees and 15-30 degrees C, respectively, below the individual isomer melting points. The characteristic microcrystals formed with the alpha racemic mixtures by using a glycerin-aqueous gold chloride reagent were not produced by the beta racemic mixtures.

Separation of standard opiates and their analysis in pharmaceutical and illicit preparations by paired-ion reverse-phase high-pressure liquid chromatography.

The separation of standard opiates in a mixture and their analysis in clandestine and pharmaceutical preparations were accomplished by PIC on a micro-Bondapak C18 column. The identification of the opiates was based on two parameters: retention times and the ratios of absorbance peaks recorded at 254 and 280 nm. No prior clean-up procedure of samples was required for analysis by this method. Baseline separation of drug components in clandestine and in pharmaceutical preparations made this method suitable for their quantitation.

Retinol-binding proteins in human testis cytosol.

In the cytosol fraction of human testes a specific binding protein for retinol has been isolated by sephadex column chromatography and by gradient centrifugation. The protein has a sedimentation coefficient of 2S, and its molecular weight is estimated by gel filtration to be approximately 16,000 daltons. Competitive binding studies with labeled retinol and 200-fold molar excess of unlabeled retinal, retinoic acid, retinyl palmitate and retinyl acetate indicate that the isolated protein is specific for retinol. Retinyl esters bind to the protein as effectively as retinol; however retinal binds to a lesser degree than retinol esters. In addition, a lower molecular weight protein of approximately 4,500 daltons was found in the cytosol that has comparatively lower affinity for retinol binding than the 16,000-dalton protein.

pH-dependent Soret difference spectra of the deoxy and carbonmonoxy forms of human hemoglobin and its derivatives.

The transition from deoxy to oxystructure of hemoglobin A (Hb) is accompanied by the breaking of the salt bridges formed by C-terminal residues in deoxy-Hb. This, in turn, changes the state of the heme. The switch between these different allosteric forms can be followed by changes in the optical absorbance spectra (Perutz, M. F., Ladner, J. E., Simon, S. R., and Ho, C. (1974), Biochemistry 13, 2163). Using difference spectroscopy in the soret region, pH-dependent spectral changes of Hb and its derivatives (carbamylated at both the alpha-NH2 groups, alpha2cbeta2c; N-ethylsuccinimide hemoglobin, NES-Hb) in their deoxy and carbonmonoxy forms were measured. From these measurements, the pK values of histidine-146beta and valine-1alpha in deoxy-Hb were determined to be 8.6 +/- 0.2 and 7.7 +/- 0.1, respectively. In carbonmonoxy-Hb a pK value of 6.3 +/- 0.1 was found.

The plane of cleavage in human ferrihemoglobin. I. Ultraviolet difference spectroscopy.

X-ray diffraction studies have shown that hemoglobin has two predominant interfaces in the tetramer at which dissociation to dimers could occur. These interfaces have been designed as alpha1-beta1 and alpha1-beta2. There are 2 tyrosyl residues and 1 tryptophanyl residue in the alpha1-beta2- interface but only 1 tyrosyl residue in the alpha1-beta1 interface exposed to the solvent are perturbed. The ultraviolet difference spectrum between ferrihemoglobin dissociated in 1 M NaClO4 and undissociated hemoglobin revealed two negative peaks, one at 292.5 nm and another at 285 nm. This difference spectrum is due to tyrosyl and tryptophanyl residues which reside on the plane of cleavage and were exposed to 1 M NaClO4 upon dissociation. Hence, dissociation must have occurred along the alpha1-beta2 interface to yield alpha1 beta1 dimers. The deltaF degrees value extrapolated to zero salt concentration calculated on the basis of difference spectroscopy and sedimentation velocity experiments is 8.6 plus or minus 0.7 kcal per mol at pH 7.1 (K equals 4.5 times 10-7.