Antibacterial Effect of Amino Acid-Silver Complex Loaded Montmorillonite Incorporated in Dental Acrylic Resin.

Several dental materials contain silver for antibacterial effect, however the effect is relatively low. The reason for the lower antibacterial efficacy of silver is considered to be the fact that silver ions bind to chloride ions in saliva. To develop new effective silver antibacterial agents that can be useful in the mouth, we synthesized two novel amino acid (methionine or histidine)-silver complexes (Met or His-Ag) loaded with montmorillonite (Mont) and analyzed their antibacterial efficacy. At first the complexes were characterized using nuclear magnetic resonance (NMR), and amino acid-Ag complex-loaded Mont (amino acid-Ag-Mont) were characterized using X-ray diffraction (XRD) and scanning electron microscopy (SEM). The antibacterial efficacy of these materials in dental acrylic resin was then investigated by bacterial growth measurement using a spectrophotometer. As controls, commercially available silver-loaded zeolite and silver-zirconium phosphate were also tested. Dental acrylic resin incorporating His-Ag-Mont strongly inhibited Streptococcus mutans growth. This was explained by the fact that His-Ag complex revealed the highest amounts of silver ions in the presence of chloride. The structure of the amino acid-Ag complexes affected the silver ion presence in chloride and the antibacterial efficacy. His-Ag-Mont might be used as antibacterial agents for dental materials.

Development of fibrin hydrogel-based in vitro bioassay system for assessment of skin permeability to and pro-inflammatory activity mediated by zinc ion released from nanoparticles.

Nanoparticles (NPs) are promising products in industry and medicine due to their unique physicochemical properties. In particular, zinc oxide (ZnO) NPs are extensively incorporated into sunscreens to protect the skin from exposure to ultraviolet radiation. However, there are several health concerns about skin penetration and the resultant toxicity. As methodologies for evaluating NP toxicity are under development, it is difficult to fully assess the toxicity of ZnO NPs toward humans. In this study, we developed a platform to simultaneously detect skin permeability to and pro-inflammatory activity mediated by zinc ion released from NPs. First, we generated a stable reporter cell line expressing green fluorescent protein (GFP) under the control of interleukin-8 (IL-8) promoter activity. The expression levels of GFP induced by zinc reflected the endogenous IL-8 expression levels and the pro-inflammatory responses. Next, we found that fibrin hydrogel can reproduce permeability to zinc ion of a human skin equivalent model and is therefore a promising material to assess skin permeability to zinc ion. Then, we constructed a fibrin hydrogel-based in vitro bioassay system for the simultaneous detection of skin permeability to and pro-inflammatory activity mediated by zinc ion released from NPs by using a stable reporter cell line and a fibrin hydrogel layer. This bioassay system is a promising in vitro permeation test due to its technical simplicity and good predictability. Overall, we believe that our bioassay system can be widely used in the cosmetics and pharmaceutical industries.

Effectiveness and stability of silane coupling agent incorporated in 'universal' adhesives.

OBJECTIVE: For bonding indirect restorations, some 'universal' adhesives incorporate a silane coupling agent to chemically bond to glass-rich ceramics so that a separate ceramic primer is claimed to be no longer needed. With this work, we investigated the effectiveness/stability of the silane coupling function of the silanecontaining experimentally prepared adhesives and Scotchbond Universal (3MESPE). METHODS AND MATERIALS: Experimental adhesives consisted of Scotchbond Universal and the silane-free Clearfil S3 ND Quick (Kuraray Noritake) mixed with Clearfil Porcelain Bond Activator (Kuraray Noritake) and the two adhesives to which γ-methacryloxypropyltrimethoxysilane (γ-MPTS) was added. Shear bond strength was measured onto silica-glass plates; the adhesive formulations were analyzed using fourier transform infrared spectroscopy (FTIR) and 13C nuclear magnetic resonance (NMR). In addition, shear bond strength onto CAD-CAM composite blocks was measured without and after thermo-cycling ageing. RESULTS: A significantly higher bond strength was recorded when Clearfil Porcelain Bond Activator was freshly mixed with the adhesive. Likewise, the experimental adhesives, to which γ-MPTS was added, revealed a significantly higher bond strength, but only when the adhesive was applied immediately after mixing; delayed application resulted in a significantly lower bond strength. FTIR and (13)C NMR revealed hydrolysis and dehydration condensation to progress with the time after γ-MPTS was mixed with the two adhesives. After thermo-cycling, the bond strength onto CAD-CAM composite blocks remained stable only for the two adhesives with which Clearfil Porcelain Bond Activator was mixed. SIGNIFICANCE: Only the silane coupling effect of freshly prepared silanecontaining adhesives was effective. Clinically, the use of a separate silane primer or silane freshly mixed with the adhesive remains recommended to bond glass-rich ceramics.

Intracellular accumulation of indium ions released from nanoparticles induces oxidative stress, proinflammatory response and DNA damage.

Due to the widespread use of indium tin oxide (ITO), it is important to investigate its effect on human health. In this study, we evaluated the cellular effects of ITO nanoparticles (NPs), indium chloride (InCl3) and tin chloride (SnCl3) using human lung epithelial A549 cells. Transmission electron microscopy and inductively coupled plasma mass spectrometry were employed to study cellular ITO NP uptake. Interestingly, greater uptake of ITO NPs was observed, as compared with soluble salts. ITO NP species released could be divided into two types: 'indium release ITO' or 'tin release ITO'. We incubated A549 cells with indium release ITO, tin release ITO, InCl3 or SnCl2 and investigated oxidative stress, proinflammatory response, cytotoxicity and DNA damage. We found that intracellular reactive oxygen species were increased in cells incubated with indium release ITO, but not tin release ITO, InCl3 or SnCl2. Messenger RNA and protein levels of the inflammatory marker, interleukin-8, also increased following exposure to indium release ITO. Furthermore, the alkaline comet assay revealed that intracellular accumulation of indium ions induced DNA damage. Our results demonstrate that the accumulation of ionic indium, but not ionic tin, from ITO NPs in the intracellular matrix has extensive cellular effects.

In vitro evaluation of the cellular effect of indium tin oxide nanoparticles using the human lung adenocarcinoma A549 cells.

Indium tin oxide (ITO) is widely used in liquid crystal displays (LCDs) or plasma and mobile phone displays. Elevated production and usage of ITO in such displays have led to increased concerns over the safety of industrial workers exposed to particulate aerosols produced during cutting, grinding and polishing of these materials. However, the cellular effects of ITO nanoparticles (NPs) are still unclear, although it has been reported that micro-scale ITO particles induce cytotoxicity. The aim of this study was to examine the potential of ITO NPs to induce cytotoxicity, oxidative stress, and DNA damage using human lung adenocarcinoma A549 cells. Here, stable dispersions of a medium containing ITO NPs were obtained using pre-adsorption and centrifugal fractionation methods, and the A549 cells were incubated in this medium. The ITO NPs showed low cytotoxic effects as shown by the WST-1 and LDH assays. Transmission electron microscopy observations showed the cellular uptake of ITO NPs. The ITO NPs increased the intracellular level of reactive oxygen species and the expression of the heme oxygenase 1 gene. Further, the results of alkaline comet assays showed that ITO NPs induced DNA damage. Thus, these results suggest that ITO NPs possess a genotoxic potential on human lung adenocarcinoma A549 cells.

Lithium recovery from salt lake brine by H2TiO3.

The details of the ion exchange properties of layered H2TiO3, derived from the layered Li2TiO3 precursor upon treatment with HCl solution, with lithium ions in the salt lake brine (collected from Salar de Uyuni, Bolivia) are reported. The lithium adsorption rate is slow, requiring 1 d to attain equilibrium at room temperature. The adsorption of lithium ions by H2TiO3 follows the Langmuir model with an adsorptive capacity of 32.6 mg g(-1) (4.7 mmol g(-1)) at pH 6.5 from the brine containing NaHCO3 (NaHCO3 added to control the pH). The total amount of sodium, potassium, magnesium and calcium adsorbed from the brine was <0.30 mmol g(-1). The H2TiO3 was found capable of efficiently adsorbing lithium ions from the brine containing competitive cations such as sodium, potassium, magnesium and calcium in extremely large excess. The results indicate that the selectivity order Li(+) ≫ Na(+), K(+), Mg(2+), Ca(2+) originates from a size effect. The H2TiO3 can be regenerated and reused for lithium exchange in the brine with an exchange capacity very similar to the original H2TiO3.

Electron transport characteristics in nanosegregated columnar phases of perylene tetracarboxylic bisimide derivatives bearing oligosiloxane chains.

Electron transport characteristics in nanosegregated columnar phases of perylene tetracarboxylic bisimide (PTCBI) derivatives bearing oligosiloxane chains are studied over wide temperature ranges using a time-of-flight (TOF) method. In the ordered columnar phases of the PTCBI derivatives bearing disiloxane chains, the electron mobilities exceed 0.1 cm(2) V(-1) s(-1) at room temperature. In the disordered columnar phase of the PTCBI derivative bearing trisiloxane chains, the electron mobility reaches the order of 10(-3) cm(2) V(-1) s(-1) at around room temperature. These electron mobilities are temperature-independent at around room temperature. However, their dependence upon the electric field becomes larger when the temperature is lowered below room temperature; this behavior is described by a hopping transport mechanism. The experimental results are analyzed using a one-dimensional disorder model.

Temperature-independent hole mobility of a smectic liquid-crystalline semiconductor based on band-like conduction.

A liquid-crystalline (LC) phenylterthiophene derivative, which exhibited an ordered smectic phase at room temperature, was purified by vacuum sublimation under a flow of nitrogen. During the sublimation process, thin plates with sizes of 1 mm grew on the surface of the vacuum tube. The crystals exhibited the same X-ray diffraction patterns as the ordered smectic phase of the LC state that was formed through a conventional recrystallization process by using organic solvents. Because of the removal of chemical impurities, the hole mobility in the ordered smectic phase of the vacuum-grown thin plates increased to 1.2×10(-1) cm(2) V(-1) s(-1) at room temperature, whereas that of the LC precipitates was 7×10(-2) cm(2) V(-1) s(-1). The hole mobility in the ordered smectic phase of the vacuum-sublimated sample was temperature-independent between 400 and 220 K. The electric-field dependence of the hole mobility was also very small within this temperature range. The temperature dependence of hole mobility was well-described by the Hoesterey-Letson model. The hole-transport characteristics indicate that band-like conduction affected by the localized states, rather than a charge-carrier-hopping mechanism, is a valid mechanism for hole transport in an ordered smectic phase.

A liquid-crystalline perylene tetracarboxylic bisimide derivative bearing a triethylene oxide chain and complexation of the derivative with Li cations.

A liquid-crystalline (LC) perylene tetracarboxylic bisimide (PTCBI) derivative bearing a triethylene oxide chain as well as two pentamethyldisiloxane chains was synthesized. This compound exhibits an ordered lamellar phase at room temperature, and the LC phase is retained when the sample is cooled to -100 °C. Due to the presence of extended π-conjugated perylene rings, efficient electron transport occurs in the lamellar phase and the electron mobility exceeds 1 × 10(-3) cm(2) V(-1) s(-1) at room temperature. Moreover, this PTCBI derivative can form a complex with lithium triflate because of the polar triethylene oxide chain. Lithium triflate can be mixed with it up to 3 mol%. Up to this concentration, the lamellar LC structure and the electron transport properties are not perturbed by the presence of the ionic species.

Photofabrication of fullerene-shelled quantum dots supramolecular nanoparticles for solar energy harvesting.

Quantum dots-based electron donor-acceptor systems play a rising role in the design of renewable and carbon-free energy harvesting technologies. In this article, we discuss the photofabrication of fullerene-shelled quantum dots supramolecular nanoparticles, in which the fullerene shell acts as not only a well-defined electron acceptor but also a robust protecting layer against the photocorrosion of the quantum dot core. We evaluate the ensemble and single-molecule electron transfer from the core to the shell in the nanoparticles and the photocurrent response of a photoelectrochemical cell constructed using the nanoparticles. The supramolecular nanoparticle has been prepared by the covalent tethering of a fullerene-thiol monolayer to the quantum dot followed by the photochemical reactions of free fullerene-thiol to the tethered monolayer. The nanoparticles are characterized using scanning electron microscopy, atomic force microscopy, and X-ray photoelectron spectroscopy. Correlated single-photon emission and the two-state ON-OFF photoluminescence show that single quantum dots are included in the supramolecular nanoparticles. The fullerene-shells suppress the blinking of single quantum dots by acting as well-defined electron traps, without allowing the transfer of Auger electrons to unknown traps. Electron transfer from the quantum dot-core to the fullerene-shell is apparent from the short ON and OFF durations in the photoluminescence intensity trajectories of single quantum dots, quenching of the photoluminescence intensity and lifetime of quantum dots at the ensemble level, and the characteristic transient absorption band of the anion radical of fullerene. We next construct a photoelectrochemical cell using the supramolecular nanoparticles, and the transferred electron is externally driven in the cell to generate ∼400 µA/cm(2) photocurrent. Electron transfer from the highly stable quantum dots to the protecting fullerene-shells places the supramolecular nanoparticles among the most promising antenna systems for the construction of cost-effective and stable next generation solar energy harvesting systems.

Fe-Al layered double hydroxides in bromate reduction: Synthesis and reactivity.

This study presents a rare use of layered double hydroxides of Fe(II) and Al(III) (Fe-Al LDH), as reported for the first time for bromate removal from aqueous solutions. The Fe-Al LDH samples were prepared with Fe/Al molar ratios of 1-4 using a co-precipitation method at pH 7, with subsequent hydrothermal treatment at 120°C. The Fe-Al LDH (molar ratio of Fe/Al=1, 2) with a layered structure exhibited nearly complete removal of bromate from initial concentration of 100µmol/dm(3) at a wide pH range of 4.0-10.5 over a 2h reaction period; the residual bromate concentration in the solution was lower than the detection limit of 0.07µmol/dm(3) (9µg-BrO(3)(-)/dm(3)). During the reaction period, bromide was released into the solution via a reduction process. Reactivity of Fe-Al LDH with a Fe/Al molar ratio of 2 did not decrease the bromate reduction efficiency during 30days.

Synthesis of a novel layered double hydroxides [MgAl(4)(OH)(12)](Cl)(2)·2.4H(2)O and its anion-exchange properties.

A novel layered double hydroxide of Mg and Al with composition [Mg(0.96)Al(4.00)(OH)(12)]Cl(1.86)(CO(3))(0.03)·2.4H(2)O, designated as MgAl(4)-Cl, was synthesized by mixing crystalline gibbsite (γ-Al(OH)(3)) and solid MgCl(2)·6H(2)O with subsequent hydrothermal treatment at 160 °C for 72h. The MgAl(4)-Cl exhibited a crystalline material of a layered structure, as evidenced from X-ray diffraction. Anion uptake experiments with the MgAl(4)-Cl showed that Cl(-) in the interlayer space can be exchanged with anions such as Br(-), H(2)PO(4)(-), CO(3)(2-) or dodecyl sulfate (DS(-)) from aqueous solutions with preservation of the layered structure. Uptake of NO(3)(-), BrO(3)(-) or SO(4)(2-) on the MgAl(4)-Cl showed different behavior; these anions can be exchanged within 1h maintaining the layered structure, but a release of Mg(2+) cations from the sample was observed with increased reaction time, resulting in collapse of the layered structure and formation of the gibbsite phase, as determined from chemical analyses and X-ray diffraction.

Uptake properties of phosphate on a novel Zr-modified MgFe-LDH(CO(3)).

We prepared a novel Zr-modified MgFe-LDH(CO(3)) composite by adding a mixed solution of MgCl(2), FeCl(3), and ZrOCl(2) and another mixed solution of 1mol/dm(3) NaOH and 1mol/dm(3) Na(2)CO(3) to distilled water at a constant pH of 10. The composite exhibited only a poorly crystalline structure, resembling that of layered double hydroxides (LDH) from X-ray diffraction. The phosphate uptake is dependent on pH, decreasing with an increase in pH. This composite shows a much greater uptake of phosphate ions in P-enriched seawater (0.33mg-P/dm(3)) than amorphous zirconium oxide and MgFe-LDH(CO(3)). The uptake isotherm was fitted with a Freundlich relation. These phosphate-uptake behaviors closely resemble those of the relevant Zr-MgAl-LDH, which is estimated to be a composite of MgAl-LDH with amorphous zirconium hydroxide on the surface from X-ray absorption spectroscopy. Therefore, a similar structure of Zr-modified MgFe-LDH(CO(3)) composite probably causes the marked increase in phosphate uptake from P-enriched seawater.

Synthesis and phosphate uptake behavior of Zr4+ incorporated MgAl-layered double hydroxides.

We synthesized Zr(4+) incorporated MgAl-layered double hydroxides, Mg(AlZr)-LDH(A) (where A denotes a counteranion in the interlayer space and is expressed as CO(3) for carbonate and Cl for chloride ions), with different molar ratios of Mg/(Al+Zr). Then we characterized their uptake behavior toward phosphate ions. CO(3)-type tertiary LDH materials synthesized at room temperature show low crystallinity, whereas the highly crystalline Cl-type tertiary LDH, [Mg(0.68)Al(0.17)Zr(0.14)(OH)(2)][Cl(0.26)(CO(3))(0.04)1.24H(2)O], was synthesized for the first time using a hydrothermal treatment at 120 degrees C. The distribution coefficients (K(d)) of oxo-anions were measured with a mixed solution containing trace amounts of the anions. The selectivity sequences were Cl(-), NO(-)(3)

Phosphate adsorption on synthetic goethite and akaganeite.

Low crystalline iron hydroxides such as goethite (alpha-FeOOH) and akaganeite (beta-FeOOH) were synthesized, and the selective adsorption of phosphate ions from phosphate-enriched seawater was examined. The results of the distribution coefficients (K(d)) of oxoanions in mixed anion solutions at pH 8 follow the selectivity order Cl-, NO3-, SO4(2-) << CO3(2-), HPO4(2-) for goethite, and Cl-, CO3(2-) < NO3- < SO4(2) << HPO4(2-) for akaganeite. In seawater, both adsorbents show high selectivity for phosphate ions despite the presence of large amounts of major cations and anions in seawater. The adsorption isotherms fitted better with the Freundlich equation and the maximum uptake of phosphate from phosphate-enriched seawater was 10 mg P/g at an equilibrium phosphate concentration of 0.3 mg P/L on both adsorbents. The phosphate adsorption/desorption cycles show that akaganeite is an excellent adsorbent even after 10 cycles and its chemical stability is good.

Selective adsorption of phosphate from seawater and wastewater by amorphous zirconium hydroxide.

Phosphate adsorption from single electrolyte (NaH2PO4), phosphate-enriched seawater, and model wastewater was studied using amorphous zirconium hydroxide, ZrO(OH)2(Na2O)0.05 1.5H2O, as an adsorbent. Batch experiments were carried out to investigate the adsorption of phosphate. The effect of pH on phosphate adsorption from seawater showed that the uptake of phosphate increased with an increase in pH up to 6, and then decreased sharply with a further increase in pH of the solution. The equilibrium data of phosphate adsorption were followed with a Freundlich isotherm. The uptake of phosphate at the adsorbent/solution ratio 0.05 g/2 L was 10 and 17 mg-P/g for the phosphate-enriched seawater and the model wastewater, respectively. A much higher adsorptivity toward phosphate ions in seawater was observed on ZrO(OH)2(Na2O)0.05 1.5H(2)O than on other representative adsorbents based on layered double hydroxides of Mg(II)-Al(III), Mg(II)-Fe(III), and Ni(II)-Fe(III). The effective desorption of phosphate ions on ZrO(OH)2(Na2O)0.05 1.5H2O could be achieved using a 0.1 M NaOH solution. The usefulness of experimental data for practical applications in removing phosphate in seawater and wastewater is discussed.

Adsorption of phosphate from seawater on calcined MgMn-layered double hydroxides.

Adsorptive properties of MgMn-3-300 (MgMn-type layered double hydroxide with Mg/Mn mole ratio of 3, calcined at 300 degrees C) for phosphate were investigated in phosphate-enriched seawater with a concentration of 0.30 mg-P/dm3. It showed the highest phosphate uptake from the seawater among the inorganic adsorbents studied (hydrotalcite, calcined hydrotalcite, activated magnesia, hydrous aluminum oxide, manganese oxide (delta-MnO2)). The phosphate uptake by MgMn-3-300 reached 7.3 mg-P/g at an adsorbent/solution ratio of 0.05 g/2 dm3. The analyses of the uptakes of other constituents (Na+, K+, Ca(+, Cl-, and SO(2-)4) of seawater showed that the adsorbent had a markedly high selectivity for the adsorption of phosphate ions. Effects of initial phosphate concentration, temperature, pH, and salinity on phosphate uptake were investigated in detail by a batch method. The phosphate uptake increased slightly with an increase in the adsorption temperature. The adsorption isotherm followed Freundlich's equation with constants of logK(F)=1.25 and 1/n=0.65, indicating that it could effectively remove phosphate even from a solution of markedly low phosphate concentration as well as with large numbers of coexisting ions. The pH dependence showed a maximum phosphate uptake around pH 8.5. The pH dependence curve suggested that selective phosphate adsorption progresses mainly by the ion exchange of HPO(2-)4. The study on the effect of salinity suggested the presence of two kinds of adsorption sites in the adsorbent: one nonspecific site with weak interaction and one specific site with strong interaction. The effective desorption of phosphate could be achieved using a mixed solution of 5 M NaCl + 0.1 M NaOH (1 M = 1 mol/dm3), with negligible dissolution of adsorbent. The adsorbent had high chemical stability against the adsorption/desorption cycle; it kept a good phosphate uptake even after the repetition of the seventh cycle.

Temperature-sensitive photoluminescence of CdSe quantum dot clusters.

The formation of narrow size dispersed and nanometer size aggregates (clusters) of cadmium selenide (CdSe) quantum dots (QDs) and their temperature-sensitive photoluminescence (PL) spectral properties close to room temperature (298 K) are discussed. CdSe QDs formed stable clusters with an average diameter of approximately 27 nm in the absence of coordinating solvents. Using transmission electron microscopy (TEM) imaging, we identified the association of individual QDs with 2-5 nm diameters into clusters of uniform size. A suspension of these clusters in different solvents exhibited reversible PL intensity changes and PL spectral shifts which were correlated with temperature. Although the PL intensity of CdSe QDs encapsulated in host matrixes and the solid state showed a response to temperature under cryogenic conditions, the current work identified for the first time QD clusters showing temperature-sensitive PL intensity variations and spectral shifts at moderate temperatures above room temperature. Temperature-sensitive reversible PL changes of clusters are discussed with respect to reversible thermal trapping of electrons at inter-QD interfaces and dipole-dipole interactions in clusters. Reversible luminescence intensity variations and spectral shifts of QD clusters show the potential for developing sensors based on QD nanoscale assemblies.

Effect of natural zeolite on methane production for anaerobic digestion of ammonium rich organic sludge.

The effect of an inorganic additive on the methane production from NH(4+)-rich organic sludge during anaerobic digestion was investigated using different kinds of inorganic adsorbent zeolites (mordenite, clinoptilolite, zeolite 3A, zeolite 4A), clay mineral (vermiculite), and manganese oxides (hollandite, birnessite). The additions of inorganic materials resulted in significant NH4+ removals from the natural organic sludge ([NH4+]=1, 150 mg N/l), except for the H-type zeolite 3A and birnessite. However, an enhanced methane production was only achieved using natural mordenite. Natural mordenite also enhanced the methane production from the sludge with a markedly high NH4+ concentration (4500 mg N/l) during anaerobic digestion. Chemical analyses of the sludge after the digestion showed considerable increases in the Ca2+ and Mg2+ concentrations in the presence of natural mordenite, but not with synthetic zeolite 3A. The effect of Ca2+ or Mg2+ addition on the methane production was studied using Na(+)-exchanges mordenite and Ca2+ or Mg(2+)-enriched sludge. The simultaneous addition of Ca2+ ions and Na(+)-exchanged mordenite enhanced the methane production; the amount of produced methane was about three times greater than that using only the Na(+)-exchanged mordenite. In addition, comparing the methane production by the addition of natural mordenite or Ca2+ ions, the methane production with natural mordenite was about 1.7 times higher than that with only Ca2+ ions. The addition of 5% and 10% natural mordenite were suitable condition for obtaining a high methane production. These results indicated that the Ca2+ ions, which are released from natural mordenite by a Ca2+/NH4+ exchange, enhanced the methane production of the organic waste at a high NH4+ concentration. Natural mordenite has a synergistic effect on the Ca2+ supply as well on the NH4+ removal during anaerobic digestion, which is effective for the mitigation of NH4+ inhibition against methane production.