Development of chondrocyte-laden alginate hydrogels with modulated microstructure and properties for cartilage regeneration.

Alginate hydrogel is an attractive biomaterial for cell microencapsulation. The microarchitecture of hydrogels can regulate cellular functions. This study aims to investigate the applicability of sodium citrate buffer (SCB) as a culture medium supplement for modulating the microstructure of alginate microbeads to provide a favorable microenvironment for chondrogenic induction. The chondrocyte-laden microbeads, with and without TGF-ß3 incorporation, were produced through an encapsulator. The obtained small-sized microbeads (~300 µm) were exposed to a treatment medium containing SCB, composed of varied concentrations of sodium citrate (1.10-1.57 mM), sodium chloride (3.00-4.29 mM), and ethylenediaminetetraacetic acid (0.60-0.86 mM) to partially degrade their crosslinked structure for 3 days, followed by culture in a normal medium until day 21. Scanning electron microscope micrographs demonstrated a loose hydrogel network with an enhanced pore size in the SCB-treated microbeads. Increasing the concentration of SCB in the treatment medium reduced the calcium content of the microbeads via a Na+ /Ca2+ exchange process and improved the water absorption of the microbeads, resulting in a higher swelling ratio. All the tested SCB concentrations were non-cytotoxic. Increases in aggrecan and type II collagen gene expression and their corresponding extracellular matrix accumulation, glycosaminoglycans, and type II collagen were vividly detected in the TGF-ß3-containing microbeads with increasing SCB concentrations in the treatment medium. Our findings highlighted that the combination of SCB treatment and TGF-ß3 incorporation in the chondrocyte-laden microbeads is a promising strategy for enhancing cartilage regeneration, which may contribute to a versatile application in cell delivery and tissue engineering.

Chondrogenic Differentiation of Human Mesenchymal Stem Cells and Macrophage Polarization on 3D-Printed Poly(ε-caprolactone)/Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) Blended Scaffolds with Different Secondary Porous Structures.

This study was aimed to evaluate the chondrogenic differentiation of human mesenchymal stem cells (hMSCs) and polarization of THP-1-derived macrophages cultured on poly(ε-caprolactone) (PC)/poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PH) blended scaffolds with dual primary (PP) and secondary (SP) pores, which were fabricated via a 3D printing technique, i.e., fused deposition modeling, followed by a salt-leaching process at 50 °C for varied times, i.e., 15, 30, and 60 min. Sodium chloride (SC), a porogen, was initially incorporated in the blend at varied weight percentages, i.e., 0, 25, and 50%, whereas 1 M NaOH solution and deionized water were used as salt-leaching agents. To elucidate the surface properties of the developed scaffolds, directly governed by the amount of the salt originally mixed and the salt-leaching efficiency, several characterization techniques, e.g., scanning electron microscopy, X-ray microcomputed tomography, mercury intrusion porosimetry, atomic force microscopy, and contact angle measurement, were used. Meanwhile, the salt-leaching efficiency was determined by means of weight loss measurement and thermogravimetric analysis. It was found that the alkaline solution could satisfactorily leach out the salt particles in 60 min with a mild etching of the polymer framework. The most immensely and homogeneously pitted filament surface was observed in the NaOH-treated scaffold initially integrated with 50% salt, i.e., 60B_PC/PH/50SC; the SP structure was mostly open and interconnected. The size of most of micropores was about 0.14 µm. With its suitable microsurface roughness and hydrophilicity, 60B_PC/PH/50SC could properly support the initial attachment and lamellipodia formation of hMSCs, which was favorable for chondrogenesis. Consequently, a significantly increased ratio of glycosaminoglycans/deoxyribonucleic acid and a superior expression of the COL2A1 gene were detected when cells were grown on this material. Although 60B_PC/PH/50SC induced the macrophages to secrete a slightly high level of IL-1ß during the first few days of culture, the polarized M1 cells could return to a nearly normal stage at Day7, suggesting no unfavorable chronic inflammation caused by the material.

A novel modified culture medium for enhancing redifferentiation of chondrocytes for cartilage tissue engineering applications.

The dedifferentiation of articular chondrocytes during in vitro expansion deteriorates the hyaline cartilage regeneration. Many approaches have been developed to enhance the redifferentiation of chondrocytes. In this study, a new and effective protocol to improve the redifferentiation of porcine chondrocytes in a pellet form was established. Pellets were initially treated in the modified culture media containing ternary mixtures, binary mixtures, or single reagents of sodium citrate (SCi), sodium chloride (SCh), and ethylenediaminetetraacetic acid (EDTA) at varied concentrations during the first 3 days of culture, followed by a normal culture medium until 21 days. Viability, proliferation, cartilaginous gene expression, extracellular matrix formation, and morphology of treated cell pellets were comparatively examined. Chondrocytes exposed to SCi, SCh, and EDTA individually or in combinations of two or three chemicals were non-cytotoxic when the concentration ranges of the chemicals were 1.83-2.75, 5.00-7.50, and 1.00-1.50 mM, respectively. Cells treated with the modified media containing EDTA alone and EDTA-containing mixtures enhanced glycosaminoglycan production as well as upregulated cartilaginous gene expression, despite their low proliferation rates. Overall, when all three reagents were in use, a pronounced synergistic effect on the activations of glycosaminoglycan accumulation and type II collagen production was explicitly observed at most, particularly when cells were cultured in the medium containing SCi, SCh, and EDTA at concentrations of 2.20, 6.00, and 1.20 mM, respectively. With a use of this protocol, the redifferentiation of articular chondrocytes for regeneration of hyaline cartilage for tissue engineering applications could be readily achieved.

Hyaluronic acid-coated gold nanorods enhancing BMP-2 peptide delivery for chondrogenesis.

Bone morphogenic protein-2 (BMP-2) knuckle epitope peptide has been recently discovered and known to activate chondrogenesis. However, the applications of this soluble peptide remain very limited due to rapid diffusion resulting in poor cellular uptake into target cells. We herein designed nanoparticles made from hyaluronic acid functionalized gold nanorods (GNRs) to conjugate with thiolated BMP-2 knuckle epitope peptide via a two-step reaction. Hyaluronic acid was modified to have thiol functional groups to replace the cetyl trimethylammonium bromide ligands on the surface of GNRs. The thiolated peptides were subsequently reacted with hyaluronic acid on the surface on GNRs via a maleimide-hydrazide crosslinker. The conjugation was confirmed by the change of surface charge of GNRs and the plasmon shift. A colorimetric peptide assay suggested more than 69% of the thiolated peptides were conjugated with the hyaluronic acid coated gold nanorods. Moreover, in vitro cell viability showed that BMP-2 conjugated hyaluronic acid functionalized gold nanorods (B2HGR) were cytocompatible and did not cause cytotoxicity to fibroblast cells. The B2HGRs also significantly promote cellular uptake of the BMP-2 peptides in both human mesenchymal stem cells and porcine chondrocytes due to multivalent ligand binding to the BMP receptors on the cell surface resulting in receptor-mediated endocytosis. The enhanced cellular uptake was clearly observed under a confocal microscope resulting in the significant activation of type II collagen gene expression and glucosaminoglycan secretion in those cells. Furthermore, our delivery system is a proof-of-concept of using scaffolds in combination with nanodelivery platform to enhance cartilaginous repair. The peptide loading capacity and the release is not limited by the scaffolds. Therefore, our delivery platform has potential applications for cartilage regeneration in a preclinical and clinical setting in the future.

Perfluorinated chemicals, PFOS and PFOA, enhance the estrogenic effects of 17ß-estradiol in T47D human breast cancer cells.

Perfluorooctane sulfonate (PFOS) and perfluorooctanoic acid (PFOA) are the two most popular surfactants among perfluorinated compounds (PFCs), with a wide range of uses. Growing evidence suggests that PFCs have the potential to interfere with estrogen homeostasis, posing a risk of endocrine-disrupting effects. This in vitro study aimed to investigate the estrogenic effect of these compounds on T47D hormone-dependent breast cancer cells. PFOS and PFOA (10(-12) to 10(-4) M) were not able to induce estrogen response element (ERE) activation in the ERE luciferase reporter assay. The ERE activation was induced when the cells were co-incubated with PFOS (10(-10) to 10(-7) M) or PFOA (10(-9) to 10(-7) M) and 1 nM of 17ß-estradiol (E2). PFOS and PFOA did not modulate the expression of estrogen-responsive genes, including progesterone (PR) and trefoil factor (pS2), but these compounds enhanced the effect of E2-induced pS2 gene expression. Neither PFOS nor PFOA affected T47D cell viability at any of the tested concentrations. In contrast, co-exposure with PFOS or PFOA and E2 resulted in an increase of E2-induced cell viability, but no effect was found with 10 ng ml(-1) EGF co-exposure. Both compounds also intensified E2-dependent growth in the proliferation assay. ERK1/2 phosphorylation was increased by co-exposure with PFOS or PFOA and E2, but not with EGF. Collectively, this study shows that PFOS and PFOA did not possess estrogenic activity, but they enhanced the effects of E2 on estrogen-responsive gene expression, ERK1/2 activation and the growth of the hormone-deprived T47D cells. Copyright © 2015 John Wiley & Sons, Ltd.