Handheld Device for Selective Benzene Sensing over Toluene and Xylene.

More than 1 million workers are exposed routinely to carcinogenic benzene, contained in various consumer products (e.g., gasoline, rubbers, and dyes) and released from combustion of organics (e.g., tobacco). Despite strict limits (e.g., 50 parts per billion (ppb) in the European Union), routine monitoring of benzene is rarely done since low-cost sensors lack accuracy. This work presents a compact, battery-driven device that detects benzene in gas mixtures with unprecedented selectivity (>200) over inorganics, ketones, aldehydes, alcohols, and even challenging toluene and xylene. This can be attributed to strong Lewis acid sites on a packed bed of catalytic WO3 nanoparticles that prescreen a chemoresistive Pd/SnO2 sensor. That way, benzene is detected down to 13 ppb with superior robustness to relative humidity (RH, 10-80%), fulfilling the strictest legal limits. As proof of concept, benzene is quantified in indoor air in good agreement (R2 ≥ 0.94) with mass spectrometry. This device is readily applicable for personal exposure assessment and can assist the implementation of low-emission zones for sustainable environments.

Direct Evidence on the Mechanism of Methane Conversion under Non-oxidative Conditions over Iron-modified Silica: The Role of Propargyl Radicals Unveiled.

Radical-mediated gas-phase reactions play an important role in the conversion of methane under non-oxidative conditions into olefins and aromatics over iron-modified silica catalysts. Herein, we use operando photoelectron photoion coincidence spectroscopy to disentangle the elusive C2+ radical intermediates participating in the complex gas-phase reaction network. Our experiments pinpoint different C2 -C5 radical species that allow for a stepwise growth of the hydrocarbon chains. Propargyl radicals (H2 C-C≡C-H) are identified as essential precursors for the formation of aromatics, which then contribute to the formation of heavier hydrocarbon products via hydrogen abstraction-acetylene addition routes (HACA mechanism). These results provide comprehensive mechanistic insights that are relevant for the development of methane valorization processes.

Well-Defined, Silica-Supported Homobimetallic Nickel Hydride Hydrogenation Catalyst.

There is an increasing interest to replace precious metal-based catalysts by earth-abundant nonprecious metals due to higher costs, toxicity, and declining availability of the former. Here, the synthesis of a well-defined supported nickel hydrogenation catalyst prepared by surface organometallic chemistry is reported. For this purpose, [LNi(µ-H)]2 (L = HC(CMeNC6H3(iPr)2)2) was grafted on partially dehydroxylated silica to give a homobimetallic H- and O(silica)-bridged Ni2 complex. The structure of the latter was confirmed by infrared spectroscopy, X-ray absorption near-edge structure, and extended X-ray absorption fine structure analyses as well as hydride titration studies. The immobilized catalyst was capable of hydrogenating alkenes and alkynes at low temperatures without prior activation. As an example, ethene can be hydrogenated with an initial turnover frequency of 25.5 min-1 at room temperature.

Lewis Acid Strength of Interfacial Metal Sites Drives CH3 OH Selectivity and Formation Rates on Cu-Based CO2 Hydrogenation Catalysts.

CH3 OH formation rates in CO2 hydrogenation on Cu-based catalysts sensitively depend on the nature of the support and the presence of promoters. In this context, Cu nanoparticles supported on tailored supports (highly dispersed M on SiO2 ; M=Ti, Zr, Hf, Nb, Ta) were prepared via surface organometallic chemistry, and their catalytic performance was systematically investigated for CO2 hydrogenation to CH3 OH. The presence of Lewis acid sites enhances CH3 OH formation rate, likely originating from stabilization of formate and methoxy surface intermediates at the periphery of Cu nanoparticles, as evidenced by metrics of Lewis acid strength and detection of surface intermediates. The stabilization of surface intermediates depends on the strength of Lewis acid M sites, described by pyridine adsorption enthalpies and 13 C chemical shifts of -OCH3 coordinated to M; these chemical shifts are demonstrated here to be a molecular descriptor for Lewis acid strength and reactivity in CO2 hydrogenation.

Non-oxidative Methane Coupling over Silica versus Silica-Supported Iron(II) Single Sites.

Non-oxidative CH4 coupling is promoted by silica with incorporated iron sites, but the role of these sites and their speciation under reaction conditions are poorly understood. Here, silica-supported iron(II) single sites, prepared via surface organometallic chemistry and stable at 1020 °C in vacuum, are shown to rapidly initiate CH4 coupling at 1000 °C, leading to 15-22 % hydrocarbons selectivity at 3-4 % conversion. During this process, iron reduces and forms carburized iron(0) nanoparticles. This reactivity contrasts with what is observed for (iron-free) partially dehydroxylated silica, that readily converts methane, albeit with low hydrocarbon selectivity and after an induction period. This study supports that iron sites facilitate faster initiation of radical reactions and tame the surface reactivity.

Experimental and theoretical perspectives of the Noyori-Ikariya asymmetric transfer hydrogenation of imines.

The asymmetric transfer hydrogenation (ATH) of imines catalyzed by the Noyori-Ikariya [RuCl(η6-arene)(N-arylsulfonyl-DPEN)] (DPEN=1,2-diphenylethylene-1,2-diamine) half-sandwich complexes is a research topic that is still being intensively developed. This article focuses on selected aspects of this catalytic system. First, a great deal of attention is devoted to the N-arylsulfonyl moiety of the catalysts in terms of its interaction with protonated imines (substrates) and amines (components of the hydrogen-donor mixture). The second part is oriented toward the role of the η6-coordinated arene. The final part concerns the imine substrate structural modifications and their importance in connection with ATH. Throughout the text, the summary of known findings is complemented with newly-presented ones, which have been approached both experimentally and computationally.

Practical aspects and mechanism of asymmetric hydrogenation with chiral half-sandwich complexes.

This review is oriented toward the asymmetric transfer hydrogenation (ATH) of imines regarding mostly fundamental, yet important topics from the practical point of view. Development of analytical methods for the monitoring of ATH (i.e., kinetics and stereoselectivity) belongs to those topics, as well as studies on the influence of reaction conditions and structural variations on the reaction performance. The second part is devoted to the reaction mechanism with the emphasis on imine ATH and catalyst behaviour under acidic conditions. The review also addresses the asymmetric hydrogenation (AH) of ketones and imines using molecular hydrogen and the application of ATH in pharmaceutical projects. The contributions of our group to each area are included.

New insight into the role of a base in the mechanism of imine transfer hydrogenation on a Ru(II) half-sandwich complex.

Asymmetric transfer hydrogenation (ATH) of cyclic imines using [RuCl(η(6)-p-cymene)TsDPEN] (TsDPEN = N-tosyl-1,2-diphenylethylenediamine) was tested with various aliphatic (secondary, tertiary) and aromatic amines employed in the HCOOH-base hydrogen donor mixture. Significant differences in reaction rates and stereoselectivity were observed, which pointed to the fact that the role of the base in the overall mechanism could be more significant than generally accepted. The hydrogenation mixture was studied by nuclear magnetic resonance (NMR), Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS) and vibrational circular dichroism (VCD) with infrared spectroscopy. The results suggested that the protonated base formed an associate with the active ruthenium-hydride species, most probably via a hydrogen bond with the sulfonyl group of the complex. It is assumed that the steric and electronic differences among the bases were responsible for the results of the initial ATH experiments.