High rates of nitrogen removal in aerated VFCWs treating sewage through C-N-S cycle.

The efficiency of deep aerated vertical flow constructed wetlands (DA-VFCWs) being operated in Hyderabad, India, was evaluated herein using physicochemical analysis and 16S rRNA amplicon sequencing. The results showed 2-4-fold higher removal rate coefficients for Biochemical oxygen demand (1.32---3.53 m/d) and nitrogen (0.88--1.36 m/d) in DA-VFCWs than those of passive VFCWs. Elevated sulfate concentration in the DA-VFCWs effluent (84-113 mg/L) indicated possibility of sulfur-driven autotrophic denitrification (SDAD) as a major pathway operating in these wetlands besides the classical nitrogen removal pathways. The presence of nitrifiers (3.09-10.02 %), heterotrophic and aerobic denitrifiers (0.79-0.83 %), anammox bacteria (1.31-2.22 %) and SDAD bacteria (0.08-0.73 %) in the biofilm samples collected from the DA-VFCWs exemplify an interplay of Carbon-Nitrogen-Sulfur cycles in these systems. If proven, the presence of an operational SDAD pathway in DA-VFCWs can help reduce surface area requirement in VFCWs substantially besides alleviating biological clogging of the wetland substrate.

Assessment of removal rate coefficient in vertical flow constructed wetland employing machine learning for low organic loaded systems.

Secondary datasets of 42 low organic loading Vertical flow constructed wetlands (LOLVFCWs) were assessed to optimize their area requirements for N and P (nutrients) removal. Significant variations in removal rate coefficients (k20) (0.002-0.464 md-1) indicated scope for optimization. Data classification based on nitrogen loading rate, temperature and depth could reduce the relative standard deviations of the k20 values only in some cases. As an alternative method of deriving k20 values, the effluent concentrations of the targeted pollutants were predicted using two machine learning approaches, MLR and SVR. The latter was found to perform better (R2 = 0.87-0.9; RMSE = 0.08-3.64) as validated using primary data of a lab-scale VFCW. The generated model equations for predicting effluent parameters and computing corresponding k20 values can assist in a customized design for nutrient removal employing minimal surface area for such systems for attaining the desired standards.

Optimization of depth of filler media in horizontal flow constructed wetlands for maximizing removal rate coefficients of targeted pollutant(s).

Varying the depth of HFCW media causes differences in the redox status within the system, and hence the community structure and diversity of bacteria, affecting removal rates of different pollutants. The key functional microorganisms of CWs that remove contaminants belong to the phyla Proteobacteria, Bacteroidetes, Actinobacteria, and Firmicutes. Secondary data of 111 HFCWs (1232 datasets) were analyzed to deduce the relationship between volumetric removal rate coefficients (KBOD, KTN, KTKN, and KTP) and depth. Equations of depth were derived in terms of rate coefficients using machine learning approach (MLR and SVR) (R2 = 0.85, 0.87 respectively). These equations were then used to find the optimum depth for pollutant(s) removal using Grey wolf optimization (GWO). The computed optimum depths were 1.48, 1.71, 1.91, 2.09, and 2.14 m for the removal of BOD, TKN, TN, TP, and combined nutrients, respectively, which were validated through primary data. This study would be helpful for optimal design of HFCWs.

Strategies for enhancing phosphorous removal in Vertical Flow Constructed Wetlands.

Constructed wetlands (CWs) are among the fastest emerging treatment methods for wastewater treatment. Unlike their organics and nitrogen removal capacities, the potential of CWs as a sink for phosphorous is still debatable. In this study, the secondary data from several CWs treating domestic sewage were compiled and assessed. Curves were plotted between orthophosphate-phosphorous (PO43--P) loading and the corresponding removal rates. Other factors affecting PO43--P removal like depth of the CW, surface area, organic loading rate etc. Were also analyzed. Removal rates of PO43--P were conforming to a linear positive relation with the loading rates. Pea gravel as a CW medium performed consistently well (60-80% removal) for a wide range of influent PO43--P loading (0.5-1.5 g/m3-d). The increased depth of the wetland appears to favor phosphate removal. PO43--P removal was found to be correlated with outlet dissolved oxygen, total Kjeldahl nitrogen removal and effluent nitrate. The study suggests that proper design, optimal organic loading and suitable pre-treatment may increase the applicability of CWs for phosphate removal from domestic wastewater. Larger area requirements can also be avoided by increasing their depth while keeping the volume of the filter media the same.

Designing the vertical flow constructed wetland based on targeted limiting pollutant.

The requirement of large land area limits the adoption of constructed wetlands (CWs) in urban settings with limited land availability. The area calculations for CW design are commonly carried out following Kikuth approach where the removal rate constant (K) is derived from literature. Investigation of secondary data of 82 vertical flow CWs, performed in this study, yielded wide variations (0.0003 - 0.822 md-1) in the calculated K values for different pollutants under different environmental and operational conditions indicating that it is important to incorporate the desired levels of pollutant removal to arrive at customized design of CWs. The results indicated that the relative standard deviation of K values could be narrowed by classifying the datasets based on design parameters like depth, hydraulic loading rates and substrate loading rates. These calculations can help arrive at more scientific design of CW to achieve the prevailing standards for the discharge or reuse of sewage.