Influence of tooth position within the field of view on the intensity of cone-beam computed tomographic imaging artifacts when assessing teeth restored with various intracanal materials.

PURPOSE: This study aimed to quantify the influence of tooth position within the field-of-view (FOV) on cone-beam computed tomography (CBCT) imaging artifacts' intensity when assessing teeth restored with various intracanal materials. MATERIALS AND METHODS: Seventy single-rooted teeth were divided into 7 groups (10 teeth per group): NiCr post (NC), AgPd post (AP), metal core fiberglass post (MCFG), fiberglass post (FG), anatomical fiberglass post (AFG), fiberglass post cemented with core build-up cement (FGCo), and anatomical fiberglass post cemented with core build-up cement (AFGCo). All posts were cemented using a regular dual-curing resin cement (Allcem), except FGCo and AFGCo which were cemented with a core build-up dual-curing resin cement (AllcemCore). Each tooth was scanned on a CS9000 in 5 positions within the FOV: a central position, anterior horizontal peripheral, peripheral superior, peripheral inferior, and posterior horizontal peripheral position. Hyperdense, hypodense, remaining teeth areas and ROI areas were quantitatively analyzed using ImageJ software. RESULTS: Posterior horizontal peripheral position increased the intensity of artifacts on FGCo and AFGCo post groups (P<0.05), and specifically the hypodense artifact intensity on FG and AFG post groups (P<0.05). NC and AP groups presented greater intensity of artifacts than any other post groups (P<0.05). CONCLUSION: Artifact intensity increases in the presence of high atomic number materials and when the object is not centered within the FOV. The impact of positioning within the FOV on artifact was greater for fiberglass posts cemented with core build-up dual-curing cement than for metal posts and fiberglass posts cemented with regular dual-curing cement.

Beam hardening correction tool improves the diagnosis of incipient caries lesions in Micro-CT images.

OBJECTIVE: To evaluate the effect of Beam Hardening Correction tool (BHC) on Micro-CT images used in the diagnosis of incipient caries lesions. METHODS: Six posterior teeth, with 6 sound proximal surfaces and 6 natural white spot lesions, were scanned using a SkyScan1174 device. Each tooth was imaged 16 times in various acquisition parameters, and reconstructed 3 times applying different levels of BHC (0, 15 and 30%). The 288 datasets were analyzed by three examiners. Gold-standard was obtained by microscopic analyses under polarized light. Area under the ROC curve was obtained for each protocol and the BHC parameter was isolated to individually observe the influence of such parameters of reconstruction. RESULTS: Microtomographic images were accurate for the diagnosis of incipient caries lesions even when the BHC tool was not applied. Accuracy was perfect in 50 % of the protocols without BHC. When adding the artefact correction, the number of protocols that reached perfect accuracy increased to 81.25%. No difference was found between the protocols that used 15 or 30% BHC. Statistically significant differences were found only in four comparisons, and on those the images that had BHC were more accurate. Two non-BHC protocols reached accuracy scores of 0.653 and 0.881, and were improved to perfect accuracy with BHC application. CONCLUSION: The use of the BHC tool should be encouraged when using Micro-CT to detect incipient caries lesions, especially when low-quality parameters aiming less acquisition and processing time are used.

Performance of 5 different displays in the detection of artificial incipient and recurrent caries-like lesions.

OBJECTIVES: The aim of this study was to assess whether auto-calibrating medical-grade monitors perform better than off-the-shelf monitors and tablet computers in detecting artificial incipient and recurrent caries-like lesions. STUDY DESIGN: Sixty extracted teeth (30 premolars and 30 molars) were selected. All molars received class II amalgam and composite restorations. A 7-mm2 area on the crowns of half of the teeth was demineralized. Phantoms consisting of 4 teeth were created. Three observers using a 5-point scale evaluated digital periapical radiographs for the presence of caries on 5 displays: 2 autocalibrating medical-grade monitors, 2 tablets, and 1 off-the-shelf monitor. Sensitivity, specificity, accuracy, and receiver operating curve data were calculated and verified through analysis of variance and Tukey tests. Observer agreements were assessed using Cohen's κ test. RESULTS: Intraobserver agreement ranged from 0.347 to 0.612 (molars) and 0.617 to 0.811 (premolars). Interobserver agreement ranged from 0.239 to 0.559 (molars) and 0.657 to 0.858 (premolars). The performances of tablets and the off-the-shelf monitor were similar to medical monitors when the same tooth groups were compared. Medical-grade monitors presented fewer statistically significant differences when different lesions where compared within the same display and restorative material. CONCLUSIONS: Evaluations of similar lesions were not significantly different among the 3 types of displays. However, the autocalibrating medical-grade monitors performed better when incipient and recurrent lesions were compared.

Quantitative assessment of image artifacts from root filling materials on CBCT scans made using several exposure parameters.

PURPOSE: To quantify artifacts from different root filling materials in cone-beam computed tomography (CBCT) images acquired using different exposure parameters. MATERIALS AND METHODS: Fifteen single-rooted teeth were scanned using 8 different exposure protocols with 3 different filling materials and once without filling material as a control group. Artifact quantification was performed by a trained observer who made measurements in the central axial slice of all acquired images in a fixed region of interest using ImageJ. Hyperdense artifacts, hypodense artifacts, and the remaining tooth area were identified, and the percentages of hyperdense and hypodense artifacts, remaining tooth area, and tooth area affected by the artifacts were calculated. Artifacts were analyzed qualitatively by 2 observers using the following scores: absence (0), moderate presence (1), and high presence (2) for hypodense halos, hypodense lines, and hyperdense lines. Two-way ANOVA and the post-hoc Tukey test were used for quantitative and qualitative artifact analysis. The Dunnet test was also used for qualitative analysis. The significance level was set at P<.05. RESULTS: There were no significant interactions among the exposure parameters in the quantitative or qualitative analysis. Significant differences were observed among the studied filling materials in all quantitative analyses. In the qualitative analyses, all materials differed from the control group in terms of hypodense and hyperdense lines (P<.05). Fiberglass posts did not differ statistically from the control group in terms of hypodense halos (P>.05). CONCLUSION: Different exposure parameters did not affect the objective or subjective observations of artifacts in CBCT images; however, the filling materials used in endodontic restorations did affect both types of assessments.

Comparison of cone beam computed tomography and digital intraoral radiography performance in the detection of artificially induced recurrent caries-like lesions.

OBJECTIVES: The aim of this study was to compare the performance of cone beam computed tomography (CBCT) and digital radiography in the detection of artificial recurrent caries-like lesions under amalgam and composite fillings. STUDY DESIGN: The study included class II cavities in 30 molars that had been filled with amalgam. Fifteen of those molars had the restoration-enamel interface artificially demineralized. Phantoms were prepared, and CBCT images were acquired with 2 units in 3 voxel sizes (K9000, 0.076 mm; i-CAT, 0.2 mm and 0.4 mm). Intraoral radiographs were obtained with 3 systems (Digora, VistaScan, and RVG-6100). Amalgam fillings were then replaced by composite, and new images were obtained. Three examiners assessed all of the images. Sensitivity, specificity, accuracy, and receiver operating characteristic curve were calculated and verified through analysis of variance and the Tukey test. RESULTS: There were no significant differences in sensitivity and specificity when the same restorative material was present or when the restorative materials were compared with the imaging technique as a constant. As for accuracy and receiver operating characteristic curve, there were statistically significant differences when the 2 materials were compared, and there were differences in the amalgam group when the imaging modalities were compared. CONCLUSIONS: CBCT performed similarly to intraoral radiography in detecting demineralization under restorations. However, the voxel size and the type of restorative material influenced its performance.

Assessment of condyle position, fossa morphology, and disk displacement in symptomatic patients.

OBJECTIVE: The aim of the study was to determine whether there are any associations between the morphology of the glenoid fossa, articular spaces, and disk displacement by evaluating the magnetic resonance imaging (MRI) scans of symptomatic patients. Gender and age were also evaluated for any effect on the parameters. STUDY DESIGN: MRI scans of 199 temporomandibular joints were assessed for the morphology of the glenoid fossa and articular spaces in both sagittal and coronal views. The presence of disk displacement and its type in closed-mouth and open-mouth positions were also assessed. Analysis of variance (ANOVA), Tukey, and Student t tests or Mann-Whitney rank sum tests were used to investigate the associations among these variables. RESULTS: A total of 113 joints (56.8%) were presented with disk displacement. The articular spaces observed in sagittal and coronal views were, overall, significantly larger in males than in females in 3 of the 6 spaces (superior, posterior, and central spaces). Larger superior and medial articular spaces were associated with angled glenoid fossae. Higher mean values of the articular space sizes were associated with normal disk position (P < .001), except for the anterior articular space. When displacement was identified, higher values of the articular space sizes were also associated with disk reduction in the open-mouth position (P < .05). CONCLUSIONS: Condyles in the central position in the coronal view and slightly anteriorly positioned in the sagittal view are less likely to present disk displacement.

Prevalence of pathologic findings in the floor of the maxillary sinuses on cone beam computed tomography images.

This study evaluated pathologic findings in the floor of the maxillary sinuses on cone beam computed tomography (CBCT) images. CBCT scans of 500 subjects, mainly taken for dental implant planning, were evaluated. The pathologic findings in the 1000 maxillary sinuses (left and right) were categorized into 4 classes: mucosal thickening, mucous retention pseudocyst, partial opacification, and total opacification. Pathologic alterations were equally found in both sinuses (48.2% of right maxillary sinuses and 48.4% of left maxillary sinuses). There was no statistically significant difference between the 2 sides (P > 0.05). Likewise, there was no statistically significant difference in the findings between the male and female subjects (P > 0.05). Mucosal thickening was the most commonly found alteration (37.5% of examined sinuses), followed by mucous retention pseudocyst (7.1%), partial opacification (2.0%), and total opacification (1.1%). Incidental findings are common in CBCT scans. The recognition of such alterations in the maxillary sinuses is relevant, as the presence of such anomalies may require modifications in treatment planning.

Condyle Excursion Angle, Articular Eminence Inclination, and Temporomandibular Joint Morphologic Relations With Disc Displacement.

PURPOSE: The aim of this study was to evaluate the relations of the condyle excursion angle (CEA) and the morphology and morphometry of the articular eminence to disc displacement (DD) using magnetic resonance imaging (MRI) of symptomatic patients. MATERIALS AND METHODS: MRIs of 199 temporomandibular joints (TMJs) were evaluated. Qualitative and quantitative morphologic analyses were performed with tools available in PACS 11.0 (Carestream Health, Inc, Rochester, NY). The articular eminence inclination (AEI), eminence height (EH), CEA, and articular eminence morphologic shape were evaluated. Statistical analyses were used to evaluate any possible association of the variables with DD in the closed- and open-mouth positions, age, and gender. The significance level was set at .05. RESULTS: Elderly women (>60 yr) presented higher prevalence values (43.26%). There was no statistical correlation between DD and gender (P = .4290). Higher mean values of the AEI and EH were associated with box-shaped eminences. The EH, AEI, and CEA were not related to the presence or absence of DD and the different types of DD. The AEI (P = .002) and CEA (P < .001) values were higher for TMJs with disc reduction in the open-mouth position. CONCLUSION: Disc position in the closed- and open-mouth positions is not influenced by articular eminence morphology; however, the AEI and CEA have an influence on disc reduction.

Evaluation of temporomandibular joint disk displacement and its correlation with pain and osseous abnormalities in symptomatic young patients with magnetic resonance imaging.

OBJECTIVE: To evaluate the occurrence of temporomandibular joint disk displacement and its correlation with pain and osseous abnormalities using magnetic resonance imaging (MRI) in patients under 21 years of age. STUDY DESIGN: MRI images in open- and closed-mouth positions from 102 patients, under 21 years of age (mean age 17 years), were studied retrospectively. Patients were divided into six groups according to the disk-condyle relationship. Chi-square, Marascuilo procedure, and Cochran-Mantel-Haenszel tests were used to evaluate the relationships among pain, abnormalities, and the groups. RESULTS: There was a statistically significant correlation between bilateral disk displacement without reduction and pain (P = .011), and osseous changes (P < .0001). There was no proven link between pain and osseous abnormality (P = .414). CONCLUSION: Young patients are susceptible to all stages of disk displacement. There was a strong correlation only between each variable (osseous abnormalities and pain) and the most severe stage of disk displacement (bilateral disk displacement without reduction).