Design and Development of an Edible Coating for a Ready-to-Eat Fish Product.

The application of chitosan and alginate coatings for a ready-to-eat (RTE) baked fish product was studied. An experimental design was used to investigate the effect of coating a polysaccharide concentration and glycerol addition on the safety (microbial growth) and quality (water loss and lipid oxidation) of an RTE fish product under optimal and abused storage conditions. The results showed that a chitosan coating with 1% (w/v) chitosan in 1% (v/v) acetic acid and 15% (w/w chitosan) glycerol, or a 1% (w/v) alginate coating with no glycerol and no crosslinking, showed the best performance in controlling the tested safety and quality parameters. The desirability method was used to identify the shelf lives of chitosan, alginate, and double-coated RTE products. The chitosan-coated samples showed the best performance with a three-fold shelf-life extension compared to the uncoated products stored at 4 °C. Moreover, the tested coatings demonstrated their ability to provide protective functions under abused storage conditions. These results strongly suggest that edible coatings have significant potential in enhancing the shelf life and safety of ready-to-eat (RTE) fish products.

Selection of best conditions of inoculum preparation for optimum performance of the pigment production process by Talaromyces spp. using the Taguchi method.

Process optimisation techniques increasingly need to be used early on in research and development of processes for new ingredients. There are different approaches and this article illustrates the main issues at stake with a method that is an industry best practice, the Taguchi method, suggesting a procedure to assess the potential impact of its drawbacks. The Taguchi method has been widely used in various industrial sectors because it minimises the experimental requirements to define an optimum region of operation, which is particularly relevant when minimising variability is a target. However, it also has drawbacks, especially the intricate confoundings generated by the experimental designs used. This work reports a process optimisation of the synthesis of red pigments by a fungal strain, Talaromyces spp. using the Taguchi methodology and proposes an approach to assess from validation trials whether the conclusions can be accepted with confidence. The work focused on optimising the inoculum characteristics, and the studied factors were spore age and concentration, agitation speed and incubation time. It was concluded that spore age was the most important factor for both responses, with optimum results at 5 days old, with the best other conditions being spores concentration, 100,000 (spores/mL); agitation, 200 rpm; and incubation time, 84 h. The interactive effects can be considered negligible and therefore this is an example where a simple experimental design approach was successful in speedily indicating conditions able to increase pigment production by 63% compared to an average choice of settings. © 2017 American Institute of Chemical Engineers Biotechnol. Prog., 33:621-632, 2017.

Scrap tyre recycling process with molten zinc as direct heat transfer and solids separation fluid: A new reactor concept.

Every year about 1.5 billion tyres are discarded worldwide representing a large amount of solid waste, but also a largely untapped source of raw materials. The objective of the method was to prove the concept of a novel scrap tyre recycling process which uses molten zinc as the direct heat transfer fluid and, simultaneously, uses this media to separate the solids products (i.e. steel and rCB) in a sink-float separation at an operating temperature of 450-470 °C. This methodology involved: •construction of the laboratory scale batch reactor,•separation of floating rCB from the zinc,•recovery of the steel from the bottom of the reactor following pyrolysis.