Does mandibular advancement ortho-surgical procedure cause condyle changes? A case-series analysis.

INTRODUCTION: Mandibular advancement surgery corrects bone bases while establishing patients' functional and aesthetic rehabilitation. However, little is known about the results of this procedure in the structures that make up the stomatognathic system, as the condyles. OBJECTIVE: This study aimed to evaluate the structural and positional changes of mandibular condyles in ortho-surgical patients who underwent mandibular advancement surgery. MATERIAL AND METHODS: A prospective investigation was conducted with cone-beam computed tomography images. Using Dolphin Imaging® software, seven ortho-surgical patients with Angle Class II malocclusion and mandibular deficiency were evaluated. The images assessed were obtained at pre-surgical phase and after, at least, 1 year of the procedure. To study the structural and positional changes of condyles, linear and angular measurements were obtained, and the right and left sides of patients were compared. Descriptive statistical analysis was performed and, in order to verify possible significant differences, normality tests (Kolmogorov-Smirnov) were applied, followed by a paired t-test to define significance. RESULTS: For all measures evaluated in this study, no statistically significant differences were found. CONCLUSION: The ortho-surgical procedure performed did not change the structure and position of the condyles of patients who underwent surgical mandibular advancement. Right and left mandibular condyles behaved similarly, suggesting stability and condylar adaptation after surgery.

Effect of oral exposure on chemical, physical, mechanical, and morphologic properties of clear orthodontic aligners

The dental industry is heavily committed to developing more esthetic solutions for orthodontic treatments. Invisalign is a system of transparent orthodontic aligners introduced as an alternative to conventional orthodontic fittings with brackets and metal wires. This study aimed to assess the chemical, physical, mechanical and morphologic changes in these polymeric aligners after exposure to the oral environment. Twenty-four Invisalign orthodontic aligners were equally divided into 2 groups: an in vivo aged group in which patients used aligners for 14 days and the reference group, unexposed to the oral environment. Different experimental techniques were used to study the chemical structure, the color changes and translucency, the density and subsequent volume of the aligners, mechanical properties, surface roughness, morphology and elemental composition. The data were subjected to several statistical analyses. Clear orthodontic aligners exhibit chemical stability but undergo a statistically significant optical change in color and translucency. There was a gradual increase in the water absorption rate and the dimensional variation of the polymer, indicating a strong correlation among these factors. The mechanical properties of the polymer showed a statistically significant decrease in its elastic modulus and hardness. There was a slight tendency toward increased surface roughness of the material, but no statistical differences were found between reference and aged groups. The surface morphology of the used aligners demonstrates microcracks, distortions and biofilm formation. Intraoral aging adversely affected the physical, mechanical, and morphologic properties of the Invisalign appliance.

Relação entre desmame precoce, desenvolvimento de hábitos bucais deletérios e maloclusões na infância / Relationship between early weaning, development of harmful oral habits and malocclusions in childhood

Objetivo: o objetivo desta pesquisa foi analisar a associação do tempo de aleitamento materno com a prática de hábitos deletérios e o desenvolvimento de maloclusões na primeira infância. Materiais e Métodos: foram aplicados 171 formulários às mães com 18 anos ou mais que acompanharam o processo de amamentação de seu(s) filho(s) de 4 a 10 anos de idade. O questionário foi composto por 22 perguntas, sendo 15 específicas e relacionadas ao aleitamento, hábitos deletérios da criança (uso de chupeta, sucção de dedo e sucção do próprio lábio) e maloclusões específicas (mordida cruzada posterior, mordida cruzada anterior e mordida aberta). Resultados: a prevalência da amamentação exclusiva por 6 meses ou mais foi de 52%, enquanto 29,8% das crianças foram amamentadas de 0 a 5 meses e 18,2% nunca foram amamentadas no seio exclusivamente. Quanto a alimentação complementar, grande parcela (37,4%) encontrada evidenciou início após os 6 meses; 57,9% das mães relataram algum tipo de dificuldade para amamentar e 34,5% das crianças fizeram uso de chupeta. Em relação aos hábitos deletérios, 10% desenvolveram sucção de dedo. O relato de desenvolvimento de maloclusões foi de 9,4% das crianças com mordida cruzada posterior; 7,6% mordida cruzada anterior e 18,7% mordida aberta anterior. Conclusão: sendo assim, é possível inferir que o tempo preconizado pela Organização Mundial da Saúde para aleitamento materno exclusivo foi fundamental para o não desenvolvimento de hábitos deletérios e maloclusões. Em contrapartida, quanto mais cedo a introdução de alimentos complementares, e a interrupção do aleitamento exclusivo nos seis primeiros meses, maior o risco do desenvolvimento de hábitos e consequentemente maloclusões.

Objective: the objective of this research was to analyze the association of breastfeeding duration with the practice of deleterious habits and the development of malocclusions in early childhood. Materials and Methods: a total of 171 forms were applied to mothers aged 18 years or older who followed the breastfeeding process of their child(ren) between 4 and 10 years of age. The questionnaire consisted of 22 questions, 15 of which were specific and related to breastfeeding, the child's deleterious habits (use of a pacifier, finger sucking and lip sucking) and specific malocclusions (posterior crossbite, anterior crossbite and open bite). Results: the prevalence of exclusive breastfeeding for 6 months or more was 52%, while 29.8% of children were breastfed from 0 to 5 months and 18.2% were never exclusively breastfed. As for complementary feeding, a large portion (37.4%) found to start after 6 months; 57.9% of the mothers reported some type of difficulty in breastfeeding and 34.5% of the children used a pacifier. Regarding deleterious habits, 10% developed finger sucking. The report of development of malocclusions was 9.4% of children with posterior crossbite; 7.6% anterior crossbite and 18.7% anterior open bite. Conclusion: therefore, it is possible to infer that the time recommended by the World Health Organization for exclusive breastfeeding was fundamental for the non-development of deleterious habits and malocclusions. On the other hand, the earlier the introduction of complementary foods and the interruption of exclusive breastfeeding in the first six months, the greater the risk of developing habits and, consequently, malocclusions.

Effect of cigarette smoke on aesthetic brackets: an in vitro study.

OBJECTIVE: The objective of this study was to evaluate the effect of cigarette smoke (CS) on physical and mechanical properties of ceramic, polycarbonate and alumina ceramic brackets. The null hypothesis tested was that aesthetic brackets would not be influenced by CS. METHODS: Ninety aesthetic brackets were allocated to three groups (n = 30): ceramic (GCE), polycarbonate (GCO) and alumina ceramic (GPS). Ten samples of each group were assigned to color and surface roughness analysis, performed before (T0) and after (T1) exposure to CS; and twenty samples were allocated into control and experimental groups (n = 10) (not exposed and exposed to CS, respectively) for shear bond strength test (SBS). Exposure to CS followed an adaptation of the method described by Le Mesurier. Colorimetric reading, surface morphology and roughness, SBS and adhesive remnant index (ARI) were assessed. Statistical analysis comprised independent and paired t-tests, ANOVA/Tukey and Fisher's exact tests (α = 0.05). RESULTS: Changes were observed in brackets' color (NBS: GCE = 2.4; GCO = 1.9; GPS = 2.1), surface roughness (ΔRa: GCE = 1.1 ± 0.8 µm; GCO = 1.9 ± 1.5µm; GPS = -0.3 ± 0.1 µm / ΔRz: GCE = 1.4 ± 1.0 nm; GPS = -0.5 ± 0.1 nm); and SBS (GPS - experimental = 221.8 ± 48.6 N) after exposure to CS (p< 0.05). CONCLUSIONS: Exposure, in vitro, of aesthetic brackets to CS resulted in changes of color to darker and more opaque shades, surface roughness alterations, and higher SBS values. ARI scores were not associated with exposure to CS.

Is there a correlation between dental and cervical vertebrae maturation stages in growing subjects? A systematic review with meta-analysis.

OBJECTIVE: To assess the evidence on the relationship between dental and cervical vertebrae maturation. MATERIALS AND METHODS: Searches were performed (up to December 2021) in seven databases, as well as in gray literature. Studies that included growing subjects, which evaluated the correlation between the stages of tooth formation and the maturation of cervical vertebrae, were eligible. The methodological quality of the selected reports was assessed using the JBI checklist for cross-sectional studies. Random-effects meta-analyses were implemented to calculate the pooled correlation coefficients between the maturation stages of cervical vertebrae and each tooth type. The GRADE approach was followed to assess the certainty of evidence. RESULTS: Seventy-seven studies were selected. Most of them had limitations related to sampling and reliability of the methods to evaluate maturation. The syntheses evidenced positive correlations between the maturation of cervical vertebrae and the formation/calcification stages of the following lower teeth: canine (n = 7318; r = 0.692; 95% CI: 0.656-0.724), first premolar (n = 6194; r = 0.689; 95% CI: 0.649-0.725), second premolar (n = 6194; r = 0.695; 95% CI: 0.659-0.729), and second molar (n = 7905; r = 0.698; 95% CI: 0.652-0.739). All estimates were affected by the risk of bias and the presence of unexplained statistical heterogeneity. CONCLUSIONS: The evidence points to an apparent positive correlation between dental and cervical vertebrae maturation. These results need to be carefully evaluated as the body of evidence is of very low quality. CLINICAL RELEVANCE: Dental maturation might be a potential indicator of skeletal craniofacial growth status. A routine dental x-ray could be sufficient, reducing radiation exposure by requesting additional radiographs.

Effect of cigarette smoke on aesthetic brackets: an in vitro study

ABSTRACT Objective: The objective of this study was to evaluate the effect of cigarette smoke (CS) on physical and mechanical properties of ceramic, polycarbonate and alumina ceramic brackets. The null hypothesis tested was that aesthetic brackets would not be influenced by CS. Methods: Ninety aesthetic brackets were allocated to three groups (n = 30): ceramic (GCE), polycarbonate (GCO) and alumina ceramic (GPS). Ten samples of each group were assigned to color and surface roughness analysis, performed before (T0) and after (T1) exposure to CS; and twenty samples were allocated into control and experimental groups (n = 10) (not exposed and exposed to CS, respectively) for shear bond strength test (SBS). Exposure to CS followed an adaptation of the method described by Le Mesurier. Colorimetric reading, surface morphology and roughness, SBS and adhesive remnant index (ARI) were assessed. Statistical analysis comprised independent and paired t-tests, ANOVA/Tukey and Fisher's exact tests (α = 0.05). Results: Changes were observed in brackets' color (NBS: GCE = 2.4; GCO = 1.9; GPS = 2.1), surface roughness (ΔRa: GCE = 1.1 ± 0.8 µm; GCO = 1.9 ± 1.5µm; GPS = -0.3 ± 0.1 µm / ΔRz: GCE = 1.4 ± 1.0 nm; GPS = -0.5 ± 0.1 nm); and SBS (GPS - experimental = 221.8 ± 48.6 N) after exposure to CS (p< 0.05). Conclusions: Exposure, in vitro, of aesthetic brackets to CS resulted in changes of color to darker and more opaque shades, surface roughness alterations, and higher SBS values. ARI scores were not associated with exposure to CS.

RESUMO Objetivo: O objetivo do presente estudo foi avaliar os efeitos da fumaça do cigarro (FC) nas propriedades físicas e mecânicas de braquetes cerâmicos, de policarbonato e de cerâmica de alumina. A hipótese nula testada foi de que os braquetes estéticos não seriam influenciados pela FC. Métodos: Noventa braquetes estéticos foram alocados em três grupos (n = 30): cerâmica (GCE), policarbonato (GCO) e cerâmica de alumina (GPS). Dez amostras de cada grupo foram designadas para análise de cor e rugosidade superficial, realizada antes (T0) e após (T1) exposição à FC, e vinte amostras foram alocadas nos grupos controle e experimental (n = 10) (não expostos e expostos à FC, respectivamente) para o teste de resistência ao cisalhamento (RC). A exposição à FC foi realizada de acordo com o método descrito por Le Mesurier. Leitura colorimétrica, morfologia e rugosidade de superfície, RC e índice de adesivo remanescente (ARI) foram avaliados. A análise estatística foi realizada por meio dos testes t independente e para amostras pareadas, ANOVA/Tukey e teste exato de Fisher (α = 0,05). Resultados: Foram observadas alterações na cor (NBS: GCE = 2,4; GCO = 1,9; GPS = 2,1), rugosidade superficial (ΔRa: GCE = 1,1 ± 0,8 µm; GCO = 1,9 ± 1,5 µm; GPS = -0,3 ± 0,1 µm / ΔRz: GCE = 1,4 ± 1,0 nm; GPS = -0,5 ± 0,1 nm) e RC (GPS - experimental = 221,8 ± 48,6 N) dos braquetes após exposição à FC (p< 0,05). Conclusões: A exposição in vitro de braquetes estéticos à FC resultou em mudanças na cor, para tons mais escuros e mais opacos; alterações na rugosidade superficial e maiores valores de RC. Os resultados do ARI não foram associados à exposição à FC.

Reasons influencing the preferences of prospective patients and orthodontists for different orthodontic appliances.

OBJECTIVE: To evaluate the reasons influencing the preferences for a certain type of orthodontic appliance over another among prospective patients (PP) and orthodontists. METHODS: A total of 49 PP and 51 orthodontists were asked about their preferences for the following appliances: clear aligners (CA), lingual metallic brackets (LMB), polycrystalline and monocrystalline ceramic brackets, and buccal metallic brackets (BMB). The participants rated the importance of 17 potential reasons that would explain their choices. The reasons that contributed most to these preferences were identified. Non-parametric tests (Fisher's exact, χ2 and Mann-Whitney tests) and multivariate analyses (regression and discriminant analysis) were used to assess the data (α = 0.05). RESULTS: CA and BMB were the most chosen appliances by PP and orthodontists, respectively. LMB was the most rejected option among both groups of participants (p < 0.001). Rates of the importance of pain/discomfort, smile esthetics, finishing details, and feeding/speech impairment showed the highest differences between PP and orthodontists (p < 0.0005). Discriminant analyses showed that individuals who considered treatment time and smile esthetics as more important were more likely to prefer CA, while those who prioritized finishing details and cost were more likely to choose BMB (p < 0.05). CONCLUSIONS: Reasons related to comfort and quality of life during use were considered as more important by PP, while those related to the results and clinical performance of the appliances were considered as more relevant by orthodontists.

Mapping of supernumerary elements in patients seeking orthodontic treatment

Dimension, number and shape alterations are frequently observed dental anomalies. Objective: The aim of this study was to map the frequency, the preferred location and the most prevalent types of supernumerary teeth, in the studied population. In addition, to assess the interference that supernumerary teeth may cause in the ectopic eruption of the normal dental series teeth. Methods: This is an observational retrospective study. Data collection was performed by evaluation of dental records of patients treated in an orthodontic clinic. Patients' radiographs, photographs and gypsum dental models were analyzed and data recorded in protocol files, by previously trained undergraduate and postgraduate students. Records from 1984 to 2019 were evaluated, and evaluation lasted two months. Data were stored in Microsoft Office Excel (version 2016) for descriptive analysis. Results: From the 920 patients' records analyzed, 2.7% presented at least one supernumerary tooth, with preferred location on the anterior maxillary area and mandibular parapremolar area. The most prevalent type was the supplemental tooth, with normal eruption orientation and normal alveolar location. Conclusion: The supernumerary teeth of the studied population showed little interference in the ectopic eruption of the normal dental series. Most of the supernumerary teeth were impacted, and, approximately one third of the supernumerary teeth showed deviated eruptions.

Introdução: Alterações de dimensão, número e forma são anomalias dentárias comumente observadas. Objetivo: O objetivo foi mapear a frequência de dentes supranumerários na população estudada, sua localização preferida e os tipos mais prevalentes. Além disso, avaliar a interferência que os dentes supranumerários podem causar na erupção ectópica da série dental normal. Métodos: A pesquisa possui desenho retrospectivo observacional. A coleta de dados foi realizada pela avaliação de prontuários odontológicos dos pacientes atendidos em uma clínica ortodôntica. Foram analisados radiografias, fotografias e modelos de gesso dental dos pacientes e as informações foram registradas em arquivos de protocolo do estudo. A coleta de dados foi realizada por uma estudante de graduação e uma da pós-graduação, previamente calibradas. A coleta durou dois meses e foram avaliados registros de 1984 a 2019. Os dados foram tratados no programa Microsoft Office Excel (version 2016) com análise descritiva dos dados. Resultados: Dos 920 prontuários analisados, 2,7% apresentavam pelo menos um dente supranumerário, com localização preferida na área superior anterior e na área parapremolar mandibular. O tipo mais prevalente foi o dente suplementar, com orientação de erupção normal e localização alveolar normal. Conclusão: Os dentes supranumerários da população estudada neste estudo mostraram pouca interferência na erupção ectópica da série dental normal. A maioria dos dentes supranumerários estava em posição de impactação. E, aproximadamente um terço dos dentes supranumerários apresentaram desvios de erupção.

Anterior open bite treated with palatine crib: a case report with cephalometric, speech and electromyography analyses

This case report describes an interceptive treatment of anterior open bite (AOB) with fixed palatine grid using clinical, cephalometric, electromyographic and speech analysis data. Case report: An 8-year-old girl, Angle Class I malocclusion presenting AOB. The complete orthodontic documentation was obtained and the perioral muscles were evaluated using the electromyography during blowing, sucking and smiling activities, before and after treatment. Speech acoustic evaluation was performed through the frequencies of the formants to assess the position of the tongue. Results: The AOB was corrected in six months with reduction of vertical transpass, decrease of cephalometric Angles 1: NA and 1: NB and increase of interincisal angle. During the smile movement, it was possible to observe the decrease of the muscular activity of the superior orbicularis muscle and the increase of the muscular activity of the inferior orbicularis. In the blow movement, there was a tendency to decrease muscle activity. Opposite directions were observed at the time of installation of the grid in the frequencies of the formants. When the grid was removed, the tongue was lowered and posteriorized in relation to the installation time. When compared the final and initial moments, it was noted a predominance of tongue lower position, besides posteriorization in some vowels and anteriorization in others. Conclusion: After the use of the fixed palatine crib as an interceptive treatment for AOB, the bite was closed and it was possible to observe an harmony in the patient profile and improvement in periorbital musculature and tongue positioning.

Objetivo: Este relato de caso descreve um tratamento interceptivo da mordida aberta anterior (MAA) com grade palatina fixa usando dados clínicos, cefalométricos, eletromiográficos e de fala. Relato do caso: Menina de 8 anos de idade apresentando maloclusão Classe I de Angle e MAA. A documentação ortodôntica completa foi obtida e os músculos periorais foram avaliados pela eletromiografia durante as atividades de sopro, sucção e sorriso, antes e após o tratamento. A avaliação acústica da fala foi realizada através das frequências dos formantes para avaliar a posição da língua. Resultados: O MAA foi corrigida em seis meses com redução do transpasse vertical, diminuição dos ângulos cefalométricos 1: NA e 1: NB e aumento do ângulo interincisivo. Durante o movimento do sorriso, foi possível observar a diminuição da atividade muscular do músculo orbicular superior e o aumento da atividade muscular do orbicular inferior. No movimento do sopro, houve uma tendência a diminuir a atividade muscular. Direções opostas foram observadas no momento da instalação da grade nas frequências dos formantes. Quando a grade foi removida, a língua foi abaixada e posteriorizada em relação ao tempo de instalação inicial do aparelho. Quando comparados os momentos final e inicial, observou-se predomínio da posição inferior da língua, além de posteriorização em algumas vogais e anteriorização em outras. Conclusão: Após o uso da grade palatina fixa como tratamento interceptivo para a MAA, a mordida foi fechada e foi possível observar harmonia no perfil da paciente e melhora da musculatura periorbital e posicionamento da língua.

Impaction of mandibular third molars after orthodontic treatment by the edgewise method: a retrospective study.

This study aimed to determine the incidence of mandibular third molar (M3) impaction after orthodontic treatment by edgewise appliances, and identify possible determinant factors of M3 impaction. A retrospective cohort study was conducted with 1154 patients. Complete orthodontic records were analyzed pretreatment and posttreatment, considering the following variables: type of Angle malocclusion, treatment with or without extraction of first premolars, overbite, stage of dentition, M3 prior angulation and duration of orthodontic treatment. Impaction was determined after radiographic evidence of total closure of the root apex. The chi-square test and Poisson regression (p < 0.05) were used for statistical analysis with a hierarchical approach. Rate ratios (RR) and 95% confidence intervals (CI) were calculated. Mandibular M3 impaction incidence was 17%. Overbite equal to or greater than 4 mm (RR = 1.23, 95%CI: 1.11-1.26, p < 0.001), prior mesial angulation of M3 (RR = 0.59, 95%CI: 0.52-0.68, p < 0.001), non-extraction of first premolars (RR=1.06, 95%CI: 1.01-1.12, P=0.019) and orthodontic treatment time equal to or less than three years (RR = 0.94. 95%CI: 0.90-0.99, p < 0.014) were significantly associated with impacted M3. There was no correlation between the type of Angle malocclusion and the risk of impaction. In conclusion, the incidence of mandibular M3 impaction was considered low. The main pretreatment factors directly involved in impaction were mesioangulation of M3 and overbite equal to or greater than 4 mm. Orthodontic treatment with extraction of first premolars and treatment time greater than 3 years reduce the risk of impaction.

The influence of cigarette smoke on colour stability and friction property of aesthetic orthodontic wires-In vitro study.

OBJECTIVE: To evaluate the colour stability and friction property of aesthetic orthodontic wires when exposed to cigarette smoke. MATERIALS AND METHODS: Forty-eight samples of aesthetic orthodontic wires (0.019″×0.025″) were allocated to three experimental groups according to their brand (n=8): GAD (Aditek™); GTP (TP Orthodontics™); GRM (Rocky Mountain™) and their respective control groups (GC) (n=8). Samples were exposed to 2 cycles of smoke in a hermetic chamber while GCs were stored in artificial saliva at 37°C. Colour analysis (CIEL*a*b* colour space and NBS units) was performed on 5mm wire segments with the Vita Easyshade Compact spectrophotometer. The friction analysis was performed in a universal test machine, in segments of 5cm wires tied to ceramic brackets with maximum values recorded in N/cm. The comparison between groups was performed with the ANOVA/Tukey test (a=0.05) and the effect of the time evaluated with ANOVA-MR with Bonferroni correction (a=0.016). RESULTS: GTP and GRM did not show significant colour and friction property variations and did not differ from GC during the study (P>0.05). However, GAD was significantly sensitive to colour changes (T1-T0-L*: -4.09±1.06; a*: 2.25±0.39; b*: 1.70±0, (T2-T0-L* 0.66±0.92; a*: 2.76±0.35) and friction (T2-T0: 2.07±1.00N/cm) (P<0.016). CONCLUSION: Exposure to cigarette smoke may alter the mechanical and optical properties of aesthetic orthodontic wires.

Rates of tooth movement and bone remodeling activity: Self-ligating versus conventional brackets.

BACKGROUND: Bracket systems have been developed with the purpose of reducing frictional resistance between the archwire and accessories. The aim of this research was to compare rates of tooth movement and regions of cellular bone modeling activity along tooth root surfaces of teeth moved with conventional vs. self-ligating brackets. MATERIAL AND METHODS: The experiments were conducted in 20 male dogs. Bands were cemented in all intermediate incisors, with conventional brackets (Morelli) on the right side and hybrid self-ligating ones (T3-American Orthodontics) on the left side. A 0.019" x 0.025" stainless steel wire was inserted passively in the slot of these brackets with chain elastics (250 gf) to perform sliding mechanics. Clinical records of the orthodontic mechanics were made before and after 15 days of the tooth movement. The dental segments of the animals were prepared for light microscopy. Statistical analysis of variance and the Tukey correction with a P value at 5% were used. RESULTS: There were no significant differences in tooth movement rates between the two types of brackets but differences, in the bone modeling activity, suggested that tooth movement with the self-ligating brackets resulted in more tipping and less translational movement than tooth movement with the conventional brackets. CONCLUSIONS: The rates of tooth movement were similar between the two systems. The histological evaluation of cellular bone modeling activity along tooth root surfaces showed more translation movement of teeth with the conventional brackets, and more tipping movement of teeth with self-ligating brackets. Key words:Edgewise, histological reactions, orthodontic movement, self-ligating, brackets.

Development of a calcified odontogenic hamartoma following avulsion of a permanent central incisor.

The avulsion of a permanent immature tooth is a serious condition and a real emergency in dentistry. The management of a traumatized avulsed tooth is always a challenge to the clinician. This case report concerns the development of a calcified odontogenic hamartoma after the avulsion of an immature central incisor in an eight-year-old female. The patient presented for the treatment four months after the avulsion. Her intraoral examination showed complete healing of the area but an atypical appearance of the alveolar area of the missing tooth was observed in the periapical radiograph. A new radiographic scan performed six months later revealed the formation of a radiopaque irregular structure at the cervical level of the alveolar ridge at the site of the missing tooth. Surgical removal was performed, and the histopathological examination revealed a hamartomatous proliferation of odontogenic tissue with calcification. After healing, the lateral incisor was orthodontically moved mesially and restored to resemble the central incisor. An orthodontic device was installed to improve function and aesthetics of the patient.

Impaction of mandibular third molars after orthodontic treatment by the edgewise method: a retrospective study

Abstract This study aimed to determine the incidence of mandibular third molar (M3) impaction after orthodontic treatment by edgewise appliances, and identify possible determinant factors of M3 impaction. A retrospective cohort study was conducted with 1154 patients. Complete orthodontic records were analyzed pretreatment and posttreatment, considering the following variables: type of Angle malocclusion, treatment with or without extraction of first premolars, overbite, stage of dentition, M3 prior angulation and duration of orthodontic treatment. Impaction was determined after radiographic evidence of total closure of the root apex. The chi-square test and Poisson regression (p < 0.05) were used for statistical analysis with a hierarchical approach. Rate ratios (RR) and 95% confidence intervals (CI) were calculated. Mandibular M3 impaction incidence was 17%. Overbite equal to or greater than 4 mm (RR = 1.23, 95%CI: 1.11-1.26, p < 0.001), prior mesial angulation of M3 (RR = 0.59, 95%CI: 0.52-0.68, p < 0.001), non-extraction of first premolars (RR=1.06, 95%CI: 1.01-1.12, P=0.019) and orthodontic treatment time equal to or less than three years (RR = 0.94. 95%CI: 0.90-0.99, p < 0.014) were significantly associated with impacted M3. There was no correlation between the type of Angle malocclusion and the risk of impaction. In conclusion, the incidence of mandibular M3 impaction was considered low. The main pretreatment factors directly involved in impaction were mesioangulation of M3 and overbite equal to or greater than 4 mm. Orthodontic treatment with extraction of first premolars and treatment time greater than 3 years reduce the risk of impaction.

Escobar Syndrome-An Multidisciplinary Approach for an Excellent Outcome With 3 Years of Follow-Up.

This case report intends to provide the facial characteristics of Escobar syndrome and to describe the orthodontic treatment of a 12-year-old female patient diagnosed with it. Escobar syndrome, a variant of the multiple pterygium syndrome, is a rare disorder with many systemic, facial, and oral manifestations.The patient presented with mixed dentition, severe dolichofacial pattern, increased lower facial height, convex profile, severe anterior open bite, maxillary hypoplasia, and mandibular retrognatism. The multidisciplinary approach included soft cleft palate repair, orthodontic treatment, orthognathic surgery, restorative cosmetic dentistry, speech therapy, and physiotherapy. Despite the limitations imposed by the syndrome, this report illustrates how the multidisciplinary treatment approach aided in the correction of occlusal function and facial esthetics and improvement in the quality of life of the patient with Escobar syndrome.

Lifestyle and oral facial disorders associated with sleep bruxism in children.

OBJECTIVE: The aim of the study was to investigate the routine, sleep history, and orofacial disorders associated with children aged 3-7 years with nocturnal bruxism. METHODS: Children (n = 66) were divided into groups of parent reported nocturnal bruxism (n = 34) and those without the disorder (n = 32). Data about the child's routine during the day, during sleep and awakening, headache frequency, temporomandibular joint (TMJ), and hearing impairments were obtained through interviews with parents/caregivers. Electromyography examination was used to assess the activity of facial muscles. Multiple logistic regression (MLR), chi-square test, and t-test analyses were performed. RESULTS: MLR revealed association of nightmares (p = 0.002; OR = 18.09) and snoring (p = 0.013; OR = 0.14) with bruxism. Variables related to awakening revealed an association with bruxism (p < 0.05). Parents of the main group (children with nocturnal bruxism) reported more complaints of orofacial pain, facial appearance, and headache occurrence (p < 0.05). Auditory and muscle disorders were not significant variables (p > 0.05). CONCLUSION: Nightmares and snoring are associated with nocturnal bruxism in children. Bruxism in children elicits consequences such as headache, orofacial pain, and pain related to awakening.

Comparison of 2 types of treatment of skeletal Class II malocclusions: a 5-year post-retention analysis

Aim: To compare 2 types of treatment for Class II malocclusion assessing mandibular behavior in subjects submitted to full orthodontic treatment with standard edgewise appliance and cervical headgear (Kloehn appliance) and those who used cervical headgear in the first period and with full orthodontic appliance in the second period. Methods: The sample consisted of 80 children treated with either cervical headgear combined with full fixed appliances (n=40, group 1), or with cervical headgear at first (n=40, group 2). In both groups, lateral cephalometric radiographs were compared with those made at the beginning of treatment, at its end and at 5-year post-retention phase, in order to quantify the cephalometric measures (8 angular and 3 linear), presenting the mandibular behavior in the antero-posterior and vertical directions. All patients were treated with no extraction and no use of Class II intermaxillary elastics during the full orthodontic treatment. Results: In both groups, the effective treatment of skeletal Class II malocclusion did not interfere in the direction and amount of growth of mandibular condyles and remodeling at the lower border, with no influence on the anti-clockwise rotation of the mandible. The mandibular growth also was observed after the orthodontic treatment, suggesting that it is influenced by genetic factors. Conclusions: These observations may lead to the speculation that growing patients with skeletal Class II malocclusion and low mandibular plane are conducive to a good treatment and long-term stability with one or two periods of treatment.

Transverse effects on the nasomaxillary complex one year after rapid maxillary expansion as the only intervention: A controlled study

The aim of this study was to assess by means of cone-beam computed tomography (CBCT) scans the transverse effects on the nasomaxillary complex in patients submitted to rapid maxillary expansion (RME) using Haas expander in comparison to untreated individuals. This prospective controlled clinical study assessed 30 subjects (18 boys and 12 girls) with mixed dentition and during pubertal growth. The treated group was submitted to RME with Haas expander, retention for six months and a six-month follow-up after removal. The control group matched the treated group in terms of age and sex distribution. CBCT scans were taken at treatment onset and one year after the expander was activated. Maxillary first molars (U6) width, right and left U6 angulation, maxillary alveolar width, maxillary basal width, palatal alveolar width, palatal base width, right and left alveolar angulation, palatal area, nasal base width, nasal cavity width and inferior nasal cavity area on the posterior, middle and anterior coronal slices were measured with Dolphin Imaging Software(r) 11.5, except for the first two variables which were performed only on the posterior slice. All transverse dimensions increased significantly (P < 0.05) in the treated group in comparison to the control, except for alveolar angulation and inferior nasal cavity area (P > 0.05). Results suggest that increase of molar, maxillary, palatal and nasal transverse dimensions was stable in comparison to the control group one year after treatment with RME.

OBJETIVO: avaliar, por meio de tomografias computadorizada de feixe cônico (TCFC), as dimensões transversais do complexo nasomaxilar de pacientes submetidos à expansão rápida da maxila (ERM) e sem intervenção. MÉTODOS: este estudo clínico prospectivo e controlado avaliou 30 indivíduos (18 meninos e 12 meninas) durante o período de crescimento puberal e dentição mista. O grupo tratado foi submetido à ERM com expansor de Haas, permanecendo 6 meses em contenção e sendo acompanhados por mais 6 meses após a remoção. O grupo controle foi acompanhado durante o mesmo tempo. Foram realizadas TCFC ao início e um ano após a fase ativa. Com o programa Dolphin Imaging 11.5, a largura entre os primeiros molares superiores (U6), angulação dos U6 direito e esquerdo, largura maxilar alveolar, largura maxilar basal, largura alveolar do palato, largura basal do palato, angulação alveolar direita e esquerda, área palatina, largura da base nasal, largura da cavidade nasal e área da cavidade nasal inferior foram obtidas em cortes coronais posterior, médio e anterior, com exceção das duas primeiras medidas, que foram obtidas apenas no corte coronal posterior. RESULTADOS: todas as medidas foram significativamente (p < 0,05) maiores no grupo da ERM, com exceção da angulação alveolar e da área da cavidade nasal, as quais não foram significativas (p > 0,05) entre os grupos. Os resultados sugerem que, um ano após a ERM, a dimensão transversal na cavidade nasal, maxila, palato e região dos molares são maiores do que em indivíduos não tratados. O protocolo de ERM utilizado foi eficaz na manutenção da dimensão transversal durante período de acompanhamento. .

Are self-ligating brackets related to less formation of Streptococcus mutans colonies? A systematic review.

OBJECTIVE: To verify, by means of a systematic review, whether the design of brackets (conventional or self-ligating) influences adhesion and formation of Streptococcus mutans colonies. SEARCH STRATEGY: four databases (Cochrane Central Register of Controlled Trials, Ovid ALL EMB Reviews, PubMed and BIREME) were selected to search for relevant articles covering the period from January 1965 to December 2012. SELECTION CRITERIA: in first consensus by reading the title and abstract. The full text was obtained from publications that met the inclusion criteria. DATA COLLECTION AND ANALYSIS: Two reviewers independently extracted data using the following keywords: conventional, self-ligating, biofilm, Streptococcus mutans, and systematic review; and independently evaluated the quality of the studies. In case of divergence, the technique of consensus was adopted. RESULTS: The search strategy resulted in 1,401 articles. The classification of scientific relevance revealed the high quality of the 6 eligible articles of which outcomes were not unanimous in reporting not only the influence of the design of the brackets (conventional or self-ligating) over adhesion and formation of colonies of Streptococcus mutans, but also that other factors such as the quality of the bracket type, the level of individual oral hygiene, bonding and age may have greater influence. Statistical analysis was not feasible because of the heterogeneous methodological design. CONCLUSIONS: Within the limitations of this study, it was concluded that there is no evidence for a possible influence of the design of the brackets (conventional or self-ligating) over colony formation and adhesion of Streptococcus mutans.

Does cortical thickness influence the primary stability of miniscrews?: A systematic review and meta-analysis.

OBJECTIVE: To investigate whether there is evidence to support the association between cortical thickness (CtTh) and the primary stability of mini-implants (MI). MATERIALS AND METHODS: A search was performed including articles published until September 2013. The inclusion criteria comprised observational clinical studies conducted in patients who received monocortical MI for orthodontic anchorage and in vivo or ex vivo experimental studies performed to evaluate the primary stability of MI, studies that evaluated the association between CtTh and MI primary stability, CtTh measurement performed numerically, and MI primary stability evaluated by implant stability quotient value, Periotest value , pull-out strength, or insertion torque. Studies conducted exclusively in artificial bone or finite elements were excluded. RESULTS: Abstract and title reading identified 15 possible articles to be included. After reading the complete text, three were excluded. One article was found by hand searching and another excluded for an overlapping sample. Finally, 12 articles were selected. A positive correlation was found between primary stability and CtTh when studies that evaluated primary stability through PS were grouped (r  =  .409) and when studies that evaluated stability in humans were grouped (r  =  .338). CONCLUSIONS: There is a positive association between MI primary stability and CtTh of the receptor site. However, there is still a lack of well-designed clinical trials.