Relevance of tyre wear particles to the total content of microplastics transported by runoff in a high-imperviousness and intense vehicle traffic urban area.

Microplastics (MPs) are an emerging pollutant and a worldwide issue. A wide variety of MPs and tyre wear particles (TWPs) are entering and spreading in the environment. TWPs can reach waterbodies through runoff, where main contributing particulate matter comes from impervious areas. In this paper, TWPs and other types of MPs that were transported with the runoff of a high populated-impervious urban area were characterised. Briefly, MPs were sampled from sediments in a stormwater detention reservoir (SDR) used for flood control of a catchment area of ∼36 km2, of which 73% was impervious. The sampled SDR is located in São Paulo, the most populated city in South America. TWPs were the most common type of MPs in this SDR, accounting for 53% of the total MPs; followed by fragments (30%), fibres (9%), films (4%) and pellets (4%). In particular, MPs in the size range 0.1 mm-0.5 mm were mostly TWPs. Such a profile of MPs in the SDR is unlike what is reported in environmental compartments elsewhere. TWPs were found at levels of 2160 units/(kg sediment·km2 of impervious area) and 87.8 units/(kg sediment·km street length); MP and TWP loadings are introduced here for the first time. The annual flux of MPs and TWPs were 7.8 × 1011 and 4.1 × 1011 units/(km2·year), respectively, and TWP emissions varied from 43.3 to 205.5 kg/day. SDRs can be sites to intercept MP pollution in urban areas. This study suggests that future research on MP monitoring in urban areas and design should consider both imperviousness and street length as important factors to normalize TWP contribution to urban pollution.

Algae as Food in Europe: An Overview of Species Diversity and Their Application.

Algae have been consumed for millennia in several parts of the world as food, food supplements, and additives, due to their unique organoleptic properties and nutritional and health benefits. Algae are sustainable sources of proteins, minerals, and fiber, with well-balanced essential amino acids, pigments, and fatty acids, among other relevant metabolites for human nutrition. This review covers the historical consumption of algae in Europe, developments in the current European market, challenges when introducing new species to the market, bottlenecks in production technology, consumer acceptance, and legislation. The current algae species that are consumed and commercialized in Europe were investigated, according to their status under the European Union (EU) Novel Food legislation, along with the market perspectives in terms of the current research and development initiatives, while evaluating the interest and potential in the European market. The regular consumption of more than 150 algae species was identified, of which only 20% are approved under the EU Novel Food legislation, which demonstrates that the current legislation is not broad enough and requires an urgent update. Finally, the potential of the European algae market growth was indicated by the analysis of the trends in research, technological advances, and market initiatives to promote algae commercialization and consumption.

Tannin-based coagulant for harvesting microalgae cultivated in wastewater: Efficiency, floc morphology and products characterization.

Tannin-based coagulants (TBCs) have the potential to be used to harvest microalgae cultivated at wastewater treatment plants. Their use would address the circular economy associated with the production of low-toxicity biomass and supernatant. Studies in this field are still scarce, and substantial gaps exist in the definitions of the flocculation process parameters. In this context, the objective of this work was to evaluate TBC performance as a natural coagulant for harvesting microalgae biomass grown in sanitary effluent digested in an up flow biofilter, as well establishing a path to enable recovery and reuse of wastewater nutrients. Classical removal techniques combined with image analysis and light scattering-based equipment were used to evaluate the coagulant performance, recovery efficiency, floc strength, and floc recovery compared to aluminum sulfate (AS). The results showed that TBC was able to efficiently harvest algal biomass from the effluent, achieving color, turbidity, and optical density (OD) removal efficiencies greater than 90% with only 5 min of sedimentation. The optimal harvesting dosage was 100 mg·L-1 for TBC and 75 mg·L-1 for AS. TBC presented the advantage of harvesting biomass without changing the pH of the medium and was also able to present satisfactory removal of the analyzed parameters (color, turbidity and OD) at pH values of 5.0, 7.0, and 8.5. In addition, TBC produced stronger flocs than AS, showing a better ability to resist breakage upon sudden shear rate variations. TBC produced macronutrient-rich biomass and supernatant that was similar to that produced with AS.

Food and Market Waste-A Pathway to Sustainable Fuels and Waste Valorization.

Food and market waste (FMW) is one of the most abundant unrecycled products which poses waste management issues and negative environmental impacts. Thermo-catalytic reforming (TCR) is a pyrolysis based technology which can convert a wide range of biomass wastes into energy vectors bio-oil, syngas, and char. This paper investigates the conversion potential of FMW into sustainable biofuels. The FMW was processed using a laboratory scale 2 kg/h TCR reactor. The process produced 7 wt % organic bio-oil, 53 wt % permanent gas, and 22 wt % char. The bio-oil higher heating value (HHV) was found to be 36.72 MJ/kg, comparable to biodiesel, and contained a low oxygen content (<5%) due to cracking of higher molecular weight organics. Naphthalene was detected to be the most abundant aromatic compound within the oil, with relative abundance of 12.95% measured by GC-MS. The total acid number of the oil (TAN) and viscosity were 11.7 mg KOH/g and 6.3 cSt, respectively. The gross calorific value of the produced biochar was 23.64 MJ/kg, while the permanent gas showed a higher heating value of approximately 17 MJ/Nm3. Methane (CH4) was found to be the largest fraction in the permanent gases reaching over 23%. This resulted either due to the partial methanation of biosyngas over the catalytically active FMW biochar or the hydrogenation of coke deposited on the biochar in the post reforming stage.