ABSTRACT
The petroleum industry stands out for causing significant environmental risks from contamination of the air, water and soil. The removal of organic pollutants from the environment poses a great technological challenge, making it increasingly necessary to develop efficient clean-up technologies. Surfactant solutions have been used to remediate soils and aquifers contaminated by hydrocarbons or crude oil derivatives. The aim of this study was to develop nanoemulsions and analyze their efficiency in extracting crude oil from a sand sample. The nanoemulsions were prepared by the phase inversion temperature (PIT) method. The oil phase consisted of orange oil and the nonionic surfactant ethoxylated lauryl ether (Ultrol L70) was used to stabilize the nanoemulsions. The surfactant concentrations were varied from 10 to 12 wt% and the oil phase from 5 to 20 wt%. The efficiency of extraction of oil from sand was assessed using the two nanoemulsions that presented the greatest stability (containing 5 wt% oil phase with 12 wt% surfactant and 20 wt% oil phase with 10 wt% surfactant). A 2(3) factorial experimental design with center point was used to evaluate and improve the soil washing process, varying the time, temperature and agitation speed of the system. The highest efficiencies were obtained at 45 degrees C.
ABSTRACT
This article reports the preparation and characterization of orange oil/water nanoemulsions stabilized by commercial nonionic surfactants based on ethoxylated lauryl ether (Ultrol line), by the phase inversion temperature (PIT) method. The orange oil/surfactant/water dispersions were prepared at different HLB values, by varying the concentrations of the surfactants as well as the concentration of the oil phase. The stability of the o/w nanoemulsions and the size distribution of the dispersed particles in these systems in general depended on the concentration of the oil phase used: the emulsions prepared with an oil phase of 14 wt% had smaller droplet size in the dispersed phase than the emulsions prepared in the presence of oil phases of 20 and 30 wt%. The nanoemulsions prepared with pure surfactants were more stable in the presence of Ultrol L60, but the surfactants' cloud point had a strong influence on the stability of the emulsions formed when this was very near room temperature. Because of this, we prepared systems containing mixtures of surfactants. Among these systems, the most stable nanoemulsions were those prepared with a Ultrol L100/Ultrol L20 mixture with HLB of 12.40. This behavior can be attributed to the complete solubilization in mixed micelles of the more hydrophobic surfactant.
