Titanium-Coated Polyetheretherketone Cages Vs Full Titanium Cages for Stand-Alone 1- or 2-Level Anterior Cervical Discectomy and Fusion: A Comparative Study.

BACKGROUND: Anterior cervical discectomy and fusion (ACDF) for the surgical treatment of cervical degenerative disease often includes an intervertebral cage, which restores disc height and lordosis while promoting fusion . Cage materials include titanium (TTN) or polyetheretherketone (PEEK). Controversy in material selection stems from higher fusion rates with TNN, despite a higher subsidence rate, while PEEK cages demonstrate superior preservation of interspace height. Combining the advantages of both materials, TTN-coated PEEK (TCPEEK) cages were developed, featuring a PEEK core with similar stiffness to the bone, enveloped with a TTN coat, improving osteointegration. However, the potential superiority of TCPEEK over TTN cages has not been investigated. This study aimed to compare clinical and radiographic outcomes following single- or double-level ACDF using either TTN or TCPEEK cages. METHODS: This retrospective single-center study included patients undergoing single- or double-level ACDF between 2017 and 2019. Clinical outcomes included the Neck Disability Index and revision surgery incidence. Radiographic parameters included cervical and segmental lordosis, C2 to C7 sagittal vertical axis, fusion, subsidence, and adjacent segment degeneration at a minimum 12-month follow-up. RESULTS: A total of 45 patients (16 TTN; 29 TCPEEK) and 58 cervical levels (21 TTN; 37 TCPEEK) were included. Both cages significantly improved Neck Disability Index scores (TTN -10.0; TCPEEK -14.1) without significant differences. Two single-level TCPEEK patients required revision surgery due to non-union. In the radiological assessments, no significant difference was found for subsidence rates (TTN 52.4%; TCPEEK 56.8%), adjacent segment degeneration, cervical and segmental lordosis, and changes in C2 to C7 sagittal vertical axis. Though not statistically significant, fusion rates trended slightly higher with TTN (90.5%) vs TCPEEK cages (86.5%). CONCLUSION: TTN and TCPEEK cages achieve satisfactory clinical and radiological outcomes in single- or double-level ACDF. This finding suggests that the choice between them can be based on other factors, such as surgeon preference or availability, rather than specific material properties. CLINICAL RELEVANCE: This study found that the selection of ACDF cage material did not affect clinical outcomes.

Cervical kyphosis after posterior cervical laminectomy with and without fusion.

BACKGROUND: Cervical posterior instrumentation and fusion is often performed to avoid post-laminectomy kyphosis. However, larger comparative analyses of cervical laminectomy with or without fusion are sparse. METHODS: A retrospective, two-center, comparative cohort study included patients after stand-alone dorsal laminectomy with (n = 91) or without (n = 46) additional fusion for degenerative cervical myelopathy with a median follow-up of 59 (interquartile range (IQR) 52) months. The primary outcome was the C2-7 Cobb angle and secondary outcomes were Neck Disability Index (NDI), modified Japanese Orthopaedic Association (mJOA) scale, revision rates, T1 slope and C2-7 sagittal vertical axis (C2-7 SVA) at final follow-up. Logistic regression analysis adjusted for potential confounders (i.e. age, operated levels, and follow-up). RESULTS: Preoperative C2-7 Cobb angle and T1 slope were higher in the laminectomy group, while the C2-7 SVA was similar. The decrease in C2-7 Cobb angle from pre- to postoperatively was more pronounced in the laminectomy group (- 6° (IQR 20) versus -1° (IQR 7), p = 0.002). When adjusting for confounders, the decrease in C2-7 Cobb angle remained higher in the laminectomy group (coefficient - 12 (95% confidence interval (CI) -18 to -5), p = 0.001). However, there were no adjusted differences for postoperative NDI (- 11 (- 23 to 2), p = 0.10), mJOA, revision rates, T1 slope and C2-7 SVA. CONCLUSION: Posterior cervical laminectomy without fusion is associated with mild loss of cervical lordosis of around 6° in the mid-term after approximately five years, however without any clinical relevance regarding NDI or mJOA in well-selected patients (particularly in shorter segment laminectomies of < 3 levels).

Instrumentation of hypoplastic pedicles with patient-specific guides.

PURPOSE: Hypoplastic pedicles of the thoracolumbar spine (<5 mm diameter) are often found in syndromic deformities of the spine and pose a challenge in pedicle screw instrumentation. 3D-printed patient-specific guides might help overcome anatomical difficulties when instrumenting pedicles with screws, thereby reducing the necessity for less effective fixation methods such as hooks or sublaminar wires. In this study, the surgical feasibility and clinical outcome of patients with hypoplastic pedicles following pedicle screw instrumentation with 3D-printed patient-specific guides were assessed. METHODS: Hypoplastic pedicles were identified on preoperative computed tomography (CT) scans in six patients undergoing posterior spinal fusion surgery between 2017 and 2020. Based on these preoperative CT scans, patient-specific guides were produced to help with screw instrumentation of these thin pedicles. Postoperatively, pedicle-screw-related complications or revisions were analyzed. RESULTS: 93/105 (88.6%) pedicle screws placed with patient-specific guides were instrumented. 62/93 (66.7%) of these instrumented pedicles were defined as hypoplastic with a mean width of 3.07 mm (SD ±0.98 mm, 95% CI [2.82-3.32]). Overall, 6 complications in the 62 hypoplastic pedicles (9.7%) were observed and included intraoperatively managed 4 cerebrospinal fluid leaks, 1 pneumothorax and 1 delayed revision due to 2 lumbar screws (2/62, 3.3%) impinging the L3 nerve root causing a painful radiculopathy. The mean follow-up time was 26.7 (SD ±11.7) months. Complications were only noted when the pedicle-width-to-screw-diameter ratio measured less than 0.62. CONCLUSION: Patient-specific 3D-printed guides can aid in challenging instrumentation of hypoplastic pedicles in the thoracolumbar spine, especially if the pedicle-width-to-screw-diameter ratio is greater than 0.62.

Reducing residual forces in spinal fusion using a custom-built rod bending machine.

BACKGROUND AND OBJECTIVE: As part of spinal fusion surgery, shaping the rod implant to align with the anatomy is a tedious, error-prone, and time-consuming manual process. Inadequately contoured rod implants introduce stress on the screw-bone interface of the pedicle screws, potentially leading to screw loosening or even pull-out. METHODS: We propose the first fully automated solution to the rod bending problem by leveraging the advantages of augmented reality and robotics. Augmented reality not only enables the surgeons to intraoperatively digitize the screw positions but also provides a human-computer interface to the wirelessly integrated custom-built rod bending machine. Furthermore, we introduce custom-built test rigs to quantify per screw absolute tensile/compressive residual forces on the screw-bone interface. Besides residual forces, we have evaluated the required bending times and reducer engagements, and compared our method to the freehand gold standard. RESULTS: We achieved a significant reduction of the average absolute residual forces from for the freehand gold standard to (p=0.0015) using the bending machine. Moreover, our bending machine reduced the average time to instrumentation per screw from to . Reducer engagements per rod were significantly decreased from an average of 1.00±1.14 to 0.11±0.32 (p=0.0037). CONCLUSION: The combination of augmented reality and robotics has the potential to improve surgical outcomes while minimizing the dependency on individual surgeon skill and dexterity.

Intraoperative anteroposterior and oblique fluoroscopic views for detection of mediolateral pedicle screw misplacement in the lumbar spine: a randomized cadaveric study.

BACKGROUD CONTEXT: Pedicle screws are commonly used for posterior fixation of the lumbar spine. Inaccuracy of screw placement can lead to disastrous complications. PURPOSE: As fluoroscopic assisted pedicle screw instrumentation is the most frequently used technique, the aim of this study was to assess the specificity, sensitivity and accuracy of intraoperative fluoroscopy to detect mediolateral screw malpositioning. We also analyzed whether the addition of an oblique view could improve these parameters. STUDY DESIGN: On 12 human cadavers, 138 pedicle screws were placed intentionally either with 0 to 2 mm (75 screws), with 2 to 4 mm (six medial and 12 lateral screws) and with >4 mm (22 medial and 23 lateral screws) breach of the pedicle from Th12 to L5. METHODS: Three experienced spine surgeons evaluated the screw positioning in fluoroscopic AP views and 4 weeks later in AP views and additional oblique views. The surgeons' interpretation was compared with the effective screw position on postoperative CT scans. RESULTS: Pedicle breaches greater than 2 mm were detected in 68% with AP views and in 67% with additional oblique views (p=.742). The specificity of AP views was 0.86 and 0.93 with additional oblique views (p=<.01). The accuracy was 0.78 with AP views and 0.81 with AP + oblique views (p=.114). There was a substantial inter-reader agreement (Fleiss's kappa: 0.632). CONCLUSIONS: Fluoroscopic screening of pedicle screw misplacement has a limited sensitivity. Adding an oblique view improves specificity but not sensitivity and accuracy in detecting screw malpositions. CLINICAL SIGNIFICANCE: When in doubt of a screw malpositioning, other modalities than a fluoroscopic assisted pedicle screw instrumentation such as intraoperative CT imaging or an intraoperative exploration of the screw trajectory must be evaluated.

Bone marrow stromal cells in Modic type 1 changes promote neurite outgrowth.

The pain in patients with Modic type 1 changes (MC1) is often due to vertebral body endplate pain, which is linked to abnormal neurite outgrowth in the vertebral body and adjacent endplate. The aim of this study was to understand the role of MC1 bone marrow stromal cells (BMSCs) in neurite outgrowth. BMSCs can produce neurotrophic factors, which have been shown to be pro-fibrotic in MC1, and expand in the perivascular space where sensory vertebral nerves are located. The study involved the exploration of the BMSC transcriptome in MC1, co-culture of MC1 BMSCs with the neuroblastoma cell line SH-SY5Y, analysis of supernatant cytokines, and analysis of gene expression changes in co-cultured SH-SY5Y. Transcriptomic analysis revealed upregulated brain-derived neurotrophic factor (BDNF) signaling-related pathways. Co-cultures of MC1 BMSCs with SH-SY5Y cells resulted in increased neurite sprouting compared to co-cultures with control BMSCs. The concentration of BDNF and other cytokines supporting neuron growth was increased in MC1 vs. control BMSC co-culture supernatants. Taken together, these findings show that MC1 BMSCs provide strong pro-neurotrophic cues to nearby neurons and could be a relevant disease-modifying treatment target.

The Biomechanics of the Transpedicular Endoscopic Approach.

STUDY DESIGN: Biomechanical cadaveric study. OBJECTIVE: The goal of this study was to analyze the effects of an endoscopic transpedicular approach with different drill diameters (6 and 8 mm) to compare them with the intact native side. In addition, the influence of bone quality on the resistance of the pedicle was investigated. SUMMARY OF BACKGROUND DATA: Clinical studies have repeatedly highlighted the benefits of endoscopic transpedicular decompression for down-migrated lumbar disc herniations. However, the biomechanical effects on pedicle stability have not been studied up to now. METHODS: Twenty-four vertebras originating from four fresh-frozen cadavers were tested under uniaxial compression load in a ramp-to-failure test: (1) the tunneled pedicle on one side, and (2) the native pedicle on the other side. Twelve lumbar vertebrae were assigned to a drill diameter of 6 mm and the other 12 to a diameter of 8 mm. RESULTS: The median ratio of sustained force for the operated side compared to the intact contralateral side is equal to 74% (63-88) for both drill diameters combined. An 8 mm transpedicular approach recorded an axial resistance of 77% (60-88) compared to the intact contralateral side ( P =0.002). A 6 mm approach resulted in an axial resistance of 72% (66-84) compared to the intact opposite side ( P =0.01). No significant difference between the two different drill diameters was recorded ( P =1). For all 3 subgroups (intact, 8 mm, 6 mm) the HU-values and the absolute resistance force showed significant correlations (intact: ρ=0.859; P <0.001; 8 mm: ρ=0.902; P <0.001; 6 mm: ρ=0.835; P <0.001). CONCLUSION: Transpedicular approach significantly reduces the axial resistance force of the pedicle, which may lead to pedicle fracture. Bone quality correlated positively with the absolute resistance force of the pedicle, whereas the influence of the drill hole diameter plays only a limited role.

Increased cranio-caudal spinal cord oscillations are the cardinal pathophysiological change in degenerative cervical myelopathy.

Introduction: Degenerative cervical myelopathy (DCM) is the most common cause of non-traumatic incomplete spinal cord injury, but its pathophysiology is poorly understood. As spinal cord compression observed in standard MRI often fails to explain a patient's status, new diagnostic techniques to assess DCM are one of the research priorities. Minor cardiac-related cranio-caudal oscillations of the cervical spinal cord are observed by phase-contrast MRI (PC-MRI) in healthy controls (HCs), while they become pathologically increased in patients suffering from degenerative cervical myelopathy. Whether transversal oscillations (i.e., anterior-posterior and right-left) also change in DCM patients is not known. Methods: We assessed spinal cord motion simultaneously in all three spatial directions (i.e., cranio-caudal, anterior-posterior, and right-left) using sagittal PC-MRI and compared physiological oscillations in 18 HCs to pathological changes in 72 DCM patients with spinal canal stenosis. The parameter of interest was the amplitude of the velocity signal (i.e., maximum positive to maximum negative peak) during the cardiac cycle. Results: Most patients suffered from mild DCM (mJOA score 16 (14-18) points), and the majority (68.1%) presented with multisegmental stenosis. The spinal canal was considerably constricted in DCM patients in all segments compared to HCs. Under physiological conditions in HCs, the cervical spinal cord oscillates in the cranio-caudal and anterior-posterior directions, while right-left motion was marginal [e.g., segment C5 amplitudes: cranio-caudal: 0.40 (0.27-0.48) cm/s; anterior-posterior: 0.18 (0.16-0.29) cm/s; right-left: 0.10 (0.08-0.13) cm/s]. Compared to HCs, DCM patients presented with considerably increased cranio-caudal oscillations due to the cardinal pathophysiologic change in non-stenotic [e.g., segment C5 amplitudes: 0.79 (0.49-1.32) cm/s] and stenotic segments [.g., segment C5 amplitudes: 0.99 (0.69-1.42) cm/s]). In contrast, right-left [e.g., segment C5 amplitudes: non-stenotic segment: 0.20 (0.13-0.32) cm/s; stenotic segment: 0.11 (0.09-0.18) cm/s] and anterior-posterior oscillations [e.g., segment C5 amplitudes: non-stenotic segment: 0.26 (0.15-0.45) cm/s; stenotic segment: 0.11 (0.09-0.18) cm/s] remained on low magnitudes comparable to HCs. Conclusion: Increased cranio-caudal oscillations of the cervical cord are the cardinal pathophysiologic change and can be quantified using PC-MRI in DCM patients. This study addresses spinal cord oscillations as a relevant biomarker reflecting dynamic mechanical cord stress in DCM patients, potentially contributing to a loss of function.

Bone density optimized pedicle screw insertion.

Background: Spinal fusion is the most common surgical treatment for the management of degenerative spinal disease. However, complications such as screw loosening lead to painful pseudoarthrosis, and are a common reason for revision. Optimization of screw trajectories to increase implant resistance to mechanical loading is essential. A recent optimization method has shown potential for determining optimal screw position and size based on areas of high bone elastic modulus (E-modulus). Aim: The aim of this biomechanical study was to verify the optimization algorithm for pedicle screw placement in a cadaveric study and to quantify the effect of optimization. The pull-out strength of pedicle screws with an optimized trajectory was compared to that of a traditional trajectory. Methods: Twenty-five lumbar vertebrae were instrumented with pedicle screws (on one side, the pedicle screws were inserted in the traditional way, on the other side, the screws were inserted using an optimized trajectory). Results: An improvement in pull-out strength and pull-out strain energy of the optimized screw trajectory compared to the traditional screw trajectory was only observed for E-modulus values greater than 3500 MPa cm3. For values of 3500 MPa cm3 or less, optimization showed no clear benefit. The median screw length of the optimized pedicle screws was significantly smaller than the median screw length of the traditionally inserted pedicle screws, p < 0.001. Discussion: Optimization of the pedicle screw trajectory is feasible, but seems to apply only to vertebrae with very high E-modulus values. This is likely because screw trajectory optimization resulted in a reduction in screw length and therefore a reduction in the implant-bone interface. Future efforts to predict the optimal pedicle screw trajectory should include screw length as a critical component of potential stability.

Pseudoarthrosis after anterior cervical discectomy and fusion: rate of occult infections and outcome of anterior revision surgery.

BACKGROUND: Pseudoarthrosis after anterior cervical discectomy and fusion (ACDF) is relatively common and can result in revision surgery. The aim of the study was to analyze the outcome of patients who underwent anterior revision surgery for pseudoarthrosis after ACDF. METHODS: From 99 patients with cervical revision surgery, ten patients (median age: 48, range 37-74; female: 5, male: 5) who underwent anterior revision surgery for pseudoarthrosis after ACDF with a minimal follow up of one year were included in the study. Microbiological investigations were performed in all patients. Computed tomography (CT) scans were used to evaluate the radiological success of revision surgery one year postoperatively. Clinical outcome was quantified with the Neck Disability Index (NDI), the Visual Analog Scale (VAS) for neck and arm pain, and the North American Spine Society Patient Satisfaction Scale (NASS) 12 months (12-60) after index ACDF surgery. The achievement of the minimum clinically important difference (MCID) one year postoperatively was documented. RESULTS: Occult infection was present in 40% of patients. Fusion was achieved in 80%. The median NDI was the same one year postoperatively as preoperatively (median 23.5 (range 5-41) versus 23.5 (7-40)), respectively. The MCID for the NDI was achieved 30%. VAS-neck pain was reduced by a median of 1.5 points one year postoperatively from 8 (3-8) to 6.5 (1-8); the MCID for VAS-neck pain was achieved in only 10%. Median VAS-arm pain increased slightly to 3.5 (0-8) one year postoperatively compared with the preoperative value of 1 (0-6); the MCID for VAS-arm pain was achieved in 14%. The NASS patient satisfaction scale could identify 20% of responders, all other patients failed to reach the expected benefit from anterior ACDF revision surgery. 60% of patients would undergo the revision surgery again in retrospect. CONCLUSION: Occult infections occur in 40% of patients who undergo anterior revision surgery for ACDF pseudoarthrosis. Albeit in a small cohort of patients, this study shows that anterior revision surgery may not result in relevant clinical improvements for patients, despite achieving fusion in 80% of cases. LEVEL OF EVIDENCE: Retrospective study, level III.

Biomechanics after spinal decompression and posterior instrumentation.

PURPOSE: The aim of this study was to elucidate segmental range of motion (ROM) before and after common decompression and fusion procedures on the lumbar spine. METHODS: ROM of fourteen fresh-frozen human cadaver lumbar segments (L1/2: 4, L3/4: 5, L5/S1: 5) was evaluated in six loading directions: flexion/extension (FE), lateral bending (LB), lateral shear (LS), anterior shear (AS), axial rotation (AR), and axial compression/distraction (AC). ROM was tested with and without posterior instrumentation under the following conditions: 1) native 2) after unilateral laminotomy, 3) after midline decompression, and 4) after nucleotomy. RESULTS: Median native ROM was FE 6.8°, LB 5.6°, and AR 1.7°, AS 1.8 mm, LS 1.4 mm, AC 0.3 mm. Unilateral laminotomy significantly increased ROM by 6% (FE), 3% (LB), 12% (AR), 11% (AS), and 8% (LS). Midline decompression significantly increased these numbers to 15%, 5%, 21%, 20%, and 19%, respectively. Nucleotomy further increased ROM in all directions, most substantially in AC of 153%. Pedicle screw fixation led to ROM decreases of 82% in FE, 72% in LB, 42% in AR, 31% in AS, and 17% in LS. In instrumented segments, decompression only irrelevantly affected ROM. CONCLUSIONS: The amount of posterior decompression significantly impacts ROM of the lumbar spine. The here performed biomechanical study allows creation of a simplified rule of thumb: Increases in segmental ROM of approximately 10%, 20%, and 50% can be expected after unilateral laminotomy, midline decompression, and nucleotomy, respectively. Instrumentation decreases ROM by approximately 80% in bending moments and accompanied decompression procedures only minorly destabilize the instrumentation construct.

Residual motion of cortical versus pedicle screw constructs after decompression, interbody fusion and cross-link augmentation.

PURPOSE: To compare the residual range of motion (ROM) of cortical screw (CS) versus pedicle screw (PS) instrumented lumbar segments and the additional effect of transforaminal interbody fusion (TLIF) and cross-link (CL) augmentation. METHODS: ROM of thirty-five human cadaver lumbar segments in flexion/extension (FE), lateral bending (LB), lateral shear (LS), anterior shear (AS), axial rotation (AR), and axial compression (AC) was recorded. After instrumenting the segments with PS (n = 17) and CS (n = 18), ROM in relation to the uninstrumented segments was evaluated without and with CL augmentation before and after decompression and TLIF. RESULTS: CS and PS instrumentations both significantly reduced ROM in all loading directions, except AC. In undecompressed segments, a significantly lower relative (and absolute) reduction of motion in LB was found with CS 61% (absolute 3.3°) as compared to PS 71% (4.0°; p = 0.048). FE, AR, AS, LS, and AC values were similar between CS and PS instrumented segments without interbody fusion. After decompression and TLIF insertion, no difference between CS and PS was found in LB and neither in any other loading direction. CL augmentation did not diminish differences in LB between CS and PS in the undecompressed state but led to an additional small AR reduction of 11% (0.15°) in CS and 7% (0.05°) in PS instrumentation. CONCLUSION: Similar residual motion is found with CS and PS instrumentation, except of slightly, but significantly inferior reduction of ROM in LB with CS. Differences between CS and PS in diminish with TLIF but not with CL augmentation.

Translation of Medical AR Research into Clinical Practice.

Translational research is aimed at turning discoveries from basic science into results that advance patient treatment. The translation of technical solutions into clinical use is a complex, iterative process that involves different stages of design, development, and validation, such as the identification of unmet clinical needs, technical conception, development, verification and validation, regulatory matters, and ethics. For this reason, many promising technical developments at the interface of technology, informatics, and medicine remain research prototypes without finding their way into clinical practice. Augmented reality is a technology that is now making its breakthrough into patient care, even though it has been available for decades. In this work, we explain the translational process for Medical AR devices and present associated challenges and opportunities. To the best knowledge of the authors, this concept paper is the first to present a guideline for the translation of medical AR research into clinical practice.

Residual motion of different posterior instrumentation and interbody fusion constructs.

PURPOSE: To elucidate residual motion of cortical screw (CS) and pedicle screw (PS) constructs with unilateral posterior lumbar interbody fusion (ul-PLIF), bilateral PLIF (bl-PLIF), facet-sparing transforaminal lumbar interbody fusion (fs-TLIF), and facet-resecting TLIF (fr-TLIF). METHODS: A total of 35 human cadaver lumbar segments were instrumented with PS (n = 18) and CS (n = 17). Range of motion (ROM) and relative ROM changes were recorded in flexion/extension (FE), lateral bending (LB), axial rotation (AR), lateral shear (LS), anterior shear (AS), and axial compression (AC) in five instrumentational states: without interbody fusion (wo-IF), ul-PLIF, bl-PLIF, fs-TLIF, and fr-TLIF. RESULTS: Whereas FE, LB, AR, and AC noticeably differed between the instrumentational states, AS and LS were less prominently affected. Compared to wo-IF, ul-PLIF caused a significant increase in ROM with PS (FE + 42%, LB + 24%, AR + 34%, and AC + 77%), however, such changes were non-significant with CS. ROM was similar between wo-IF and all other interbody fusion techniques. Insertion of a second PLIF (bl-PLIF) significantly decreased ROM with CS (FE -17%, LB -26%, AR -20%, AC -51%) and PS (FE - 23%, LB - 14%, AR - 20%, AC - 45%,). Facet removal in TLIF significantly increased ROM with CS (FE + 6%, LB + 9%, AR + 17%, AC of + 23%) and PS (FE + 7%, AR + 12%, AC + 13%). CONCLUSION: bl-PLIF and TLIF show similarly low residual motion in both PS and CS constructs, but ul-PLIF results in increased motion. The fs-TLIF technique is able to further decrease motion compared to fr-TLIF in both the CS and PS constructs.

Role of C-reactive protein in the bone marrow of Modic type 1 changes.

Modic type 1 changes (MC1) are vertebral bone marrow lesions and associate with low back pain. Increased serum C-reactive protein (CRP) has inconsistently been associated with MC1. We aimed to provide evidence for the role of CRP in the tissue pathophysiology of MC1 bone marrow. From 13 MC1 patients undergoing spinal fusion at MC1 levels, vertebral bone marrow aspirates from MC1 and intrapatient control bone marrow were taken. Bone marrow CRP, interleukin (IL)-1, and IL-6 were measured with enzyme-linked immunosorbent assays; lactate dehydrogenase (LDH) was measured with a colorimetric assay. CRP, IL-1, and IL-6 were compared between MC1 and control bone marrow. Bone marrow CRP was correlated with blood CRP and with bone marrow IL-1, IL-6, and LDH. CRP expression by marrow cells was measured with a polymerase chain reaction. Increased CRP in MC1 bone marrow (mean difference: +0.22 mg CRP/g, 95% confidence interval [CI] [-0.04, 0.47], p = 0.088) correlated with blood CRP (r = 0.69, p = 0.018), with bone marrow IL-1ß (ρ = 0.52, p = 0.029) and IL-6 (ρ = 0.51, p = 0.031). Marrow cells did not express CRP. Increased LDH in MC1 bone marrow (143.1%, 95% CI [110.7%, 175.4%], p = 0.014) indicated necrosis. A blood CRP threshold of 3.2 mg/L detected with 100% accuracy increased CRP in MC1 bone marrow. In conclusion, the association of CRP with inflammatory and necrotic changes in MC1 bone marrow provides evidence for a pathophysiological role of CRP in MC1 bone marrow.

CD90-positive stromal cells associate with inflammatory and fibrotic changes in modic changes.

Objective: Modic changes (MC) are vertebral bone marrow lesions seen on magnetic resonance images, that associate with disc degeneration and low back pain (LBP). Few studies described MC histopathology qualitatively based on a few patient samples. CD90-positive bone marrow stromal cells were shown to be pro-fibrotic in MC. We aimed to provide the first semi-quantitative histomorphometric analysis of MC bone marrow. We hypothesized a role of CD90-positive cells in MC pathomechanisms. Design: Human biopsies from Modic type 1 changes (MC1, n â€‹= â€‹8), Modic type 2 changes (MC2, n â€‹= â€‹6), and control biopsies (MC0, n â€‹= â€‹8) from adjacent vertebrae were obtained from 14 LBP patients during lumbar spinal fusion. Biopsies were processed for histology/immunohistochemistry. Inflammatory changes (oedema, inflammatory infiltrates), fibrotic changes (connective tissue, type I and III collagen, fibronectin, α-smooth muscle actin), and amount of bone marrow stromal cells (CD90, CD105) were scored. Scores for MC0, MC1, and MC2 were compared with non-parametric tests. Pairwise correlations, hierarchical clustering, and principal component analysis of histological readouts were calculated to identify most important histomorphometric MC characteristics. Results: Compared to MC0, MC1 had more connective tissue, oedema, inflammatory infiltrates, and CD90+ cells. MC2 compared to MC0 had more oedema and CD90+ cells. Scores of CD90 correlated and clustered with inflammatory and fibrotic changes. Amount of connective tissue correlated with LBP. Conclusion: Accumulation of CD90+ cells is a major characteristic of MC in patients undergoing lumbar spinal fusion and associates with inflammatory and fibrotic changes. Therefore, CD90+ cells may play an important role in the inflammatory-fibrotic pathomechanisms of MC.

Biomechanics of Transforaminal Endoscopic Approaches.

STUDY DESIGN: Biomechanical cadaveric study. OBJECTIVE: The aim of this study was to compare the effect of transforaminal endoscopic approaches with open decompression procedures. SUMMARY OF BACKGROUND DATA: Clinical studies have repeatedly highlighted the benefits of endoscopic decompression, however, the biomechanical effects of endoscopic approaches (with and without injury to the disk) have not been studied up to now. MATERIALS AND METHODS: Twelve spinal segments originating from four fresh-frozen cadavers were biomechanically tested in a load-controlled endoscopic transforaminal approach study. Segmental range of motion (ROM) after endoscopic approach was compared with segmental ROM after (1) microsurgical decompression with unilateral laminotomy and (2) midline decompression with bilateral laminotomy. In the intact state and after decompression, the segments were loaded in flexion-extension (FE), lateral shear (LS), lateral bending (LB), anterior shear (AS), and axial rotation (AR). RESULTS: Vertebral segment ROM was comparable between the two endoscopic transforaminal approaches. However, there was a-statistically nonsignificant-trend for a larger ROM after accessing via the inside-out technique: FE: +3% versus +7%, P =0.484; LS: +1% versus +12%, P =0.18; LB: +0.6% versus +9%, P =0.18; AS: +2% versus +11%, P =0.31; AR: -4% versus +5%, P =0.18. No significant difference in vertebral segment ROM was seen between the transforaminal endoscopic approaches and open unilateral decompression. Vertebral segment ROM was significantly smaller with the transforaminal endoscopic approaches compared with midline decompression for almost all loading scenarios: FE: +4% versus +17%, P =0.005; AS: +6% versus 21%, P =0.007; AR: 0% versus +24%, P =0.002. CONCLUSION: The transforaminal endoscopic intracanal technique preserves the native ROM of lumbar vertebral segments and shows a trend toward relative biomechanical superiority over the inside-out technique and open decompression procedures.

Comparison of axial and sagittal spinal cord motion measurements in degenerative cervical myelopathy.

BACKGROUND AND PURPOSE: The timing of decision-making for a surgical intervention in patients with mild degenerative cervical myelopathy (DCM) is challenging. Spinal cord motion phase contrast MRI (PC-MRI) measurements can reveal the extent of dynamic mechanical strain on the spinal cord to potentially identify high-risk patients. This study aims to determine the comparability of axial and sagittal PC-MRI measurements of spinal cord motion with the prospect of improving the clinical workup. METHODS: Sixty-four DCM patients underwent a PC-MRI scan assessing spinal cord motion. The agreement of axial and sagittal measurements was determined by means of intraclass correlation coefficients (ICCs) and Bland-Altman analyses. RESULTS: The comparability of axial and sagittal PC-MRI measurements was good to excellent at all cervical levels (ICCs motion amplitude: .810-.940; p < .001). Significant differences between axial and sagittal amplitude values could be found at segments C3 and C4, while its magnitude was low (C3: 0.07 ± 0.19 cm/second; C4: -0.12 ± 0.30 cm/second). Bland-Altman analysis showed a good agreement between axial and sagittal PC-MRI scans (coefficients of repeatability: minimum -0.23 cm/second at C2; maximum -0.58 cm/second at C4). Subgroup analysis regarding anatomic conditions (stenotic vs. nonstenotic segments) and different velocity encoding (2 vs. 3 cm/second) showed comparable results. CONCLUSIONS: This study demonstrates good comparability between axial and sagittal spinal cord motion measurements in DCM patients. To this end, axial and sagittal PC-MRI are both accurate and sensitive in detecting pathologic cord motion. Therefore, such measures could identify high-risk patients and improve clinical decision-making (ie, timing of decompression).

Spondylophyte classification based on biomechanical effects on segmental stiffness.

BACKGROUND CONTEXT: The biomechanical impact of spondylophytes on segmental stiffness is largely unknown, despite their high incidence. PURPOSE: The aim of this study was to quantify the biomechanical contribution according to location and cranio-caudal extent of spondylophytes and to create a clinically applicable radiological classification system. STUDY DESIGN: Biomechanical cadaveric study. METHODS: Twenty-six cadaveric human lumbar spinal segments with spondylophytes were tested with a displacement-controlled stepwise reduction method. The reduction in load required for the same motion after spondylophyte dissection was used to calculate the biomechanical contribution in flexion, extension, axial rotation, lateral bending, anterior, posterior and lateral shear. The spondylophytes were categorized by assessment of their anatomical position and cranio-caudal extent in computed tomography images (grade 1: spondylophytes spanning less than 50% of the disc-height, grade 2:>50%, grade 3:>90%, grade 4: bony bridging between the vertebrae) by two experienced radiologists. Cohen's kappa (κ) was used to report interreader reliability. RESULTS: The largest biomechanical effect of non-bridging spondylophytes (grade 1-3) was recorded during contralateral bending with a grade-dependent contribution of up to 35%. Other loading directions including ipsilateral bending and translational loading were affected with values below 13%. Spondylophytes with osseous bridging (grade 4) show large contribution to the segmental stiffness in most loading conditions with values reaching over 80%. Interreader agreement for the spondylophyte grading was "substantial" (κ=0.73, p<.001). CONCLUSIONS: The location and cranio-caudal extent of spondylophytes are essential parameters for their biomechanical effect. A reproducible classification has been validated biomechanically and helps evaluate the effect of specific spondylophyte configurations on segmental stiffness. CLINICAL SIGNIFICANCE: Non-bridging spondylophytes primarily act as tensile structures and do not provide relevant propping. A classification system is presented to support understanding of the biomechanical consequences of different spondylophyte configuration for clinical decision making in surgical planning.

Pelvic fixation in surgical correction of neuromuscular scoliosis.

Background: Surgical correction of neuromuscular scoliosis can be associated with high complication rates, including such associated with pelvic fixation. Up to now it is debated whether and when to include the pelvis into the fusion construct. Therefore, we aimed to illuminate when pelvic fixation is beneficial in surgical correction of neuromuscular scoliosis. Methods: A prospective cohort of 49 patients (mean age 13 ± 3 y, 63% females, follow up 56 months, range 24-215) who underwent correction of neuromuscular scoliosis including S1/the ileum (n = 18) or without (n = 31) pelvic fixation were included. The outcome was measured with analysis of radiological parameters, clinical improvement and complication/revision rates. Subgroup analysis was performed to find if non-ambulatory patients with gross motor function classification system (GMFCS) levels >III, with larger scoliotic curves (>60°) and moderate pelvic obliquities up to 35° benefit from pelvic fixation. Results: There was no significant difference in complications when comparing patients with (9 out of 18 patients, 50%) or without (9 out of 31 patients, 29%) fixation to the pelvis (p = .219). Wheelchair bound patients (GMFCS >III) with cobb angles greater than 60° and pelvic obliquity less than 35° (n = 20) revealed no differences in amount of clinical improvement of ambulation with (n = 9) or without (n = 11) pelvic fixation (p: n.s.). And even complication or revision rates where not different in those two groups. Conclusion: Pelvic fixation does not seem obligatory in wheelchair bound patients per definition. Even with pelvic obliquities up to 35° and large scoliotic curves >60°, avoiding pelvic fixation does not result in higher revision rate or worse clinical outcomes.