Selective Targeting of High-Affinity LFA-1 Does Not Augment Costimulation Blockade in a Nonhuman Primate Renal Transplantation Model.

Costimulation blockade (CoB) via belatacept is a lower-morbidity alternative to calcineurin inhibitor (CNI)-based immunosuppression. However, it has higher rates of early acute rejection. These early rejections are mediated in part by memory T cells, which have reduced dependence on the pathway targeted by belatacept and increased adhesion molecule expression. One such molecule is leukocyte function antigen (LFA)-1. LFA-1 exists in two forms: a commonly expressed, low-affinity form and a transient, high-affinity form, expressed only during activation. We have shown that antibodies reactive with LFA-1 regardless of its configuration are effective in eliminating memory T cells but at the cost of impaired protective immunity. Here we test two novel agents, leukotoxin A and AL-579, each of which targets the high-affinity form of LFA-1, to determine whether this more precise targeting prevents belatacept-resistant rejection. Despite evidence of ex vivo and in vivo ligand-specific activity, neither agent when combined with belatacept proved superior to belatacept monotherapy. Leukotoxin A approached a ceiling of toxicity before efficacy, while AL-579 failed to significantly alter the peripheral immune response. These data, and prior studies, suggest that LFA-1 blockade may not be a suitable adjuvant agent for CoB-resistant rejection.

Change in Biotypic Diversity of Russian Wheat Aphid (Hemiptera: Aphididae) Populations in the United States.

A key component of Russian wheat aphid, Diuraphis noxia (Kurdjumov), management has been through planting resistant wheat cultivars. A new biotype, RWA2, appeared in 2003 which caused widespread damage to wheat cultivars containing the Dn4 gene. Biotypic diversity in Russian wheat aphid populations has not been addressed since 2005 when RWA2 dominated the biotype complex. Our objectives were to determine the biotypic diversity in the Central Great Plains and Colorado Plateau at regional (2010, 2011, 2013) and local (2012) levels and detect the presence of new Russian wheat aphid biotypes. Regional and within-field aphid collections were screened against Russian wheat aphid-resistant wheat genotypes containing genes Dn3, Dn4, Dn6, Dn7, Dn9, CI2401; and resistant barley STARS 9301B. In 2010, all aphid collections from Texas were avirulent to the Dn4 resistance gene in wheat. Regional results revealed Dn4 avirulent RWA6 was widespread (55-84%) in populations infesting wheat in both regions. Biotypes RWA1, 2, and 3/7 were equally represented with percentages<20% each while RWA8 was rarely detected. Combining percentages of RWA1, 6, and 8 across regions to estimate avirulence to Dn4 gene revealed high percentages for both 2011 (64-80%) and 2013 (69-90%). In contrast, the biotype structure at the local level differed where biotype percentages varied up to ≥2-fold between fields. No new biotypes were detected; therefore, Dn7, CI2401, and STARS9301B remained resistant to all known Russian wheat aphid biotypes. This study documents a shift to Dn4 avirulent biotypes and serves as a valuable baseline for biotypic diversity in Russian wheat aphid populations prior to the deployment of new Russian wheat aphid-resistant wheat cultivars.

Linker regions and flexibility around the metalloprotease domain account for conformational activation of ADAMTS-13.

BACKGROUND: Recently, conformational activation of ADAMTS-13 was identified. This mechanism showed the evolution from a condensed conformation, in which the proximal MDTCS and distal T2-CUB2 domains are in close contact with each other, to an activated, open structure due to binding with von Willebrand factor (VWF). OBJECTIVES: Identification of cryptic epitope/exosite exposure after conformational activation and of sites of flexibility in ADAMTS-13. METHODS: The activating effect of 25 anti-T2-CUB2 antibodies was studied in the FRETS-VWF73 and the vortex assay. Cryptic epitope/exosite exposure was determined with ELISA and VWF binding assay. The molecular basis for flexibility was hypothesized through rapid automatic detection and alignment of repeats (RADAR) analysis, tested with ELISA using deletion variants and visualized using electron microscopy. RESULTS: Eleven activating anti-ADAMTS-13 antibodies, directed against the T5-CUB2 domains, were identified in the FRETS-VWF73 assay. RADAR analysis identified three linker regions in the distal domains. Interestingly, identification of an antibody recognizing a cryptic epitope in the metalloprotease domain confirmed the contribution of these linker regions to conformational activation of the enzyme. The proof of flexibility around both the T2 and metalloprotease domains, as shown by by electron microscopy, further supported this contribution. In addition, cryptic epitope exposure was identified in the distal domains, because activating anti-T2-CUB2 antibodies increased the binding to folded VWF up to ~3-fold. CONCLUSION: Conformational activation of ADAMTS-13 leads to cryptic epitope/exosite exposure in both proximal and distal domains, subsequently inducing increased activity. Furthermore, three linker regions in the distal domains are responsible for flexibility and enable the interaction between the proximal and the T8-CUB2 domains.

Biology and physics of von Willebrand factor concatamers.

Structural specialisations enable von Willebrand factor (VWF) to assemble during biosynthesis into helical tubules in Weibel-Palade bodies (WPB). Specialisations include a pH-regulated dimeric bouquet formed by the C-terminal half of VWF and helical assembly guided by the N-terminal half that templates inter-dimer disulphide bridges. Orderly assembly and storage of ultra-long concatamers in helical tubules, without crosslinking of neighboring tubules, enables unfurling during secretion without entanglement. Length regulation occurs post-secretion, by hydrodynamic force-regulated unfolding of the VWF A2 domain, and its cleavage by the plasma protease ADAMTS13 (a disintegrin and metalloprotease with a thrombospondin type 1 motif, member 13). VWF is longest at its site of secretion, where its haemostatic function is most important. Moreover, elongational hydrodynamic forces on VWF are strongest just where needed, when bound to the vessel wall, or in elongational flow in the circulation at sites of vessel rupture or vasoconstriction in haemostasis. Elongational forces regulate haemostasis by activating binding of the A1 domain to platelet GPIbα, and over longer time periods, regulate VWF length by unfolding of the A2 domain for cleavage by ADAMTS13. Recent structures of A2 and single molecule measurements of A2 unfolding and cleavage by ADAMTS13 illuminate the mechanisms of VWF length regulation. Single molecule studies on the A1-GPIb receptor-ligand bond demonstrate a specialised flex-bond that enhances resistance to the strong hydrodynamic forces experienced at sites of haemorrhage.

Fermentability of eastern gamagrass, big bluestem and sand bluestem grown across a wide variety of environments.

Plant biomass has attracted interest as a feedstock for biofuels production, but much of this work has been focused on relatively few plant species. In this study, three relatively-unstudied species of warm-season perennial grasses, grown at multiple locations in the eastern and central US and harvested over a three year period, were examined for fermentability via in vitro ruminal gas production and dry matter digestibility assays, and near-infrared reflectance calibrations were developed for these fermentation parameters. Big bluestem (Andropogon gerardii Vitman) displayed greater fermentability than did sand bluestem (Andropogon hallii Hack) or eastern gamagrass [Tripsacum dactyloides (L.) L.], but displayed lower biomass yields. The bluestems also displayed lower N contents and less variation in fermentability over different growth environments (geographic locations and harvest years), suggesting a more consistent biomass quality than for eastern gamagrass. Thus, in addition to their use as forage for ruminant animals, bluestems may be of particular interest as feedstocks for bioconversion to ethanol and other products via direct microbial fermentation (consolidated bioprocessing) schemes, and thus merit additional efforts to enhance biomass yield potential.

Case Study Part 2: Probabilistic modelling of long-term effects of pesticides on individual breeding success in birds and mammals.

Long term exposure of skylarks to a fictitious insecticide and of wood mice to a fictitious fungicide were modelled probabilistically in a Monte Carlo simulation. Within the same simulation the consequences of exposure to pesticides on reproductive success were modelled using the toxicity-exposure-linking rules developed by R.S. Bennet et al. (2005) and the interspecies extrapolation factors suggested by R. Luttik et al. (2005). We built models to reflect a range of scenarios and as a result were able to show how exposure to pesticide might alter the number of individuals engaged in any given phase of the breeding cycle at any given time and predict the numbers of new adults at the season's end.

Case Study Part 1: How to calculate appropriate deterministic long-term toxicity to exposure ratios (TERs) for birds and mammals.

In the European Union, first-tier assessment of the long-term risk to birds and mammals from pesticides is based on calculation of a deterministic long-term toxicity/exposure ratio (TER(lt)). The ratio is developed from generic herbivores and insectivores and applied to all species. This paper describes two case studies that implement proposed improvements to the way long-term risk is assessed. These refined methods require calculation of a TER for each of five identified phases of reproduction (phase-specific TERs) and use of adjusted No Observed Effect Levels (NOELs) to incorporate variation in species sensitivity to pesticides. They also involve progressive refinement of the exposure estimate so that it applies to particular species, rather than generic indicators, and relates spraying date to onset of reproduction. The effect of using these new methods on the assessment of risk is described. Each refinement did not necessarily alter the calculated TER value in a way that was either predictable or consistent across both case studies. However, use of adjusted NOELs always reduced TERs, and relating spraying date to onset of reproduction increased most phase-specific TERs. The case studies suggested that the current first-tier TER(lt )assessment may underestimate risk in some circumstances and that phase-specific assessments can help identify appropriate risk-reduction measures. The way in which deterministic phase-specific assessments can currently be implemented to enhance first-tier assessment is outlined.

A new interpretation of avian and Mammalian reproduction toxicity test data in ecological risk assessment.

The long-term risks of pesticides to wildlife in the EU currently are assessed by comparing the lowest no-observed-effect concentration (NOEC) determined from the suite of endpoints measured in existing avian and mammalian laboratory reproduction tests with estimated exposure concentrations by calculating Toxicity to Exposure Ratios (TERs). Regulatory authorities experience difficulties when assessing long-term risks because of the lack of accepted methods to improve the ecological realism of exposure and toxicity estimates and understand risks at a population level. This paper describes an approach for interpreting existing avian and mammalian toxicity test data that divides breeding cycles into several discrete phases and identifies specific test endpoints as indicators of direct pesticide effects possible at each phase. Based on the distribution of breeding initiation dates for a species of concern and the dates of pesticide applications, this approach compares the phase-specific toxicity endpoint with the expected pesticide exposure levels during each of the breeding phases. The fate of each breeding attempt is determined through a series of decision points. The cumulative reproductive response of individuals in a breeding population based on this decision framework provides a means of examining the estimated risks over the course of the breeding season and deriving an overall metric of the impact of the pesticide on reproduction. Research needed to further improve the approach is discussed.

In vitro gas production as a surrogate measure of the fermentability of cellulosic biomass to ethanol.

Current methods for measuring ethanol yields from lignocellulosic biomass are relatively slow and are not well geared for analyzing large numbers of samples generated by feedstock management and breeding research. The objective of this study was to determine if an in vitro ruminal fermentation assay used in forage quality research was predictive of results obtained using a conventional biomass-to-ethanol conversion assay. In the conventional assay, herbaceous biomass samples were converted to ethanol by Saccharomyces cerevisiae cultures in the presence of cellulase enzymes. Cultures were grown in sealed serum bottles and gas production monitored by measuring increasing head space pressure. Gas accumulation as calculated from the pressure measurements was highly correlated (r(2)>0.9) with ethanol production measured by gas chromatography at 24 h or 7 days. The same feedstocks were also analyzed by in vitro ruminal digestion, as also measured by gas accumulation. Good correlations (r(2) approximately 0.63-0.82) were observed between ethanol production during simultaneous saccharification and fermentation and gas accumulation in parallel in vitro ruminal fermentations. Because the in vitro ruminal fermentation assay can be performed without sterilization of the medium and does not require aseptic conditions, this assay may be useful for biomass feedstock agronomic and breeding research.

Real-time integration of ultrasound into neuronavigation: technical accuracy using a light-emitting-diode-based navigation system.

BACKGROUND: In brain surgery, intraoperative brain deformation is the major source of postimaging inaccuracy of neuronavigation. For intraoperative imaging of brain deformation, we developed a platform for the integration of ultrasound imaging into a navigation system. METHOD: A commercially available ultrasound system was linked to a light-emitting-diode- (LED) based neuronavigation system via rigid fixation of a position localiser to the ultrasound probe and ultrasound image transfer into the navigation system via a S-VHS port. Since the position of the ultrasound image co-ordinate system is not readily defined within the navigation reference co-ordinate system (REF CS), a transformation which links both co-ordinate systems has to be defined by a calibration procedure. Calibration of the ultrasound probe within the REF CS was performed via a cross-wire phantom. The phantom target was defined within the navigation co-ordinate system (by pointer under microscopic control) and imaged by ultrasound. Ultrasound presets were optimised (digital beam focusing, gain intensity) to attain a small echoic target for manual target definition. The transformation was derived from 150 ultrasound measures and iteration. Accuracy was calculated as mean linear error (LE; in X(REF), Y(REF), or Z(REF) direction), overall mean LE (linear errors of all axes X(REF) to Z(REF)) and Euclidean error (EE; vectorial distance from the physical target). FINDINGS: Optimised ultrasound presets (8 MHz frequency, digital beam focusing, 20% gain intensity) enabled a low interobserver error (mean: 0.5 mm, SD: 0.28) for target definition within the 2-D ultrasound image. Mean accuracy of pointer-based physical target definition in the REF CS was 0.7 mm (RMSE; SD: 0.23 mm). For navigated ultrasound, the overall mean LE was 0.43 mm (SD: 1.36 mm; 95%CL: 3.13 mm) with a mean EE of 2.26 mm (SD: 0.97 mm; 95%CL: 4.21 mm). INTERPRETATION: Using a single target cross-wire phantom, a highly accurate integration of ultrasound imaging into neuronavigation was achieved. The phantom accuracy of integration lies within the range of application accuracy of navigation systems and warrants clinical studies.

MTBE ambient water quality criteria development: a public/private partnership.

A public/private partnership was established in 1997, under the administrative oversight of the American Petroleum Institute (API), to develop aquatic toxicity data sufficient to calculate ambient water quality criteria for methyl tertiary-butyl ether (MTBE), a gasoline oxygenate. The MTBE Water Quality Criteria Work Group consisted of representatives from private companies, trade associations, and USEPA. Funding was provided by the private entities, while aquatic biological/toxicological expertise was provided by industry and USEPA scientists. This public/private partnership constituted a nonadversarial, cost-effective, and efficient process for generating the toxicity data necessary for deriving freshwater and marine ambient water quality criteria. Existing aquatic toxicity data were evaluated for acceptability, consistent with USEPA guidance, and nineteen freshwater and marine tests were conducted by commercial laboratories as part of this effort to satisfy the federal criteria database requirements. Definitive test data were developed and reported under the oversight of industry study monitors and Good Laboratory Practice standards auditors, and with USEPA scientists participating in advisory and critical review roles. Calculated, preliminary freshwater criteria for acute (Criterion Maximum Concentration) and chronic (Criterion Continuous Concentration) exposure effect protection are 151 and 51 mg MTBE/L, respectively. Calculated, preliminary marine criteria for acute and chronic exposure effect protection are 53 and 18 mg MTBE/L, respectively. These criteria values may be used for surface water quality management purposes, and they indicate that ambient MTBE concentrations documented in U. S. surface waters to date do not constitute a risk to aquatic organisms.

Kinetic and mechanical basis of rolling through an integrin and novel Ca2+-dependent rolling and Mg2+-dependent firm adhesion modalities for the alpha 4 beta 7-MAdCAM-1 interaction.

We studied interactions in shear flow of cells bearing integrins alpha4beta1 or alpha4beta7 with VCAM-1 and MAdCAM-1 substrates in different divalent cations. Interestingly, Ca(2+) was essential for tethering in flow and rolling interactions through both alpha4 integrins. Mg(2+) promoted firm adhesion of alpha4beta7-expressing cells on MAdCAM-1 but with much lower tethering efficiency in shear flow. The k(off) degrees of 1.28 s(-1) and resistance of the receptor-ligand bond to force (estimated as a bond interaction distance or sigma) for transient tethers on MAdCAM-1 were similar to values for E- and P-selectins. By contrast to results in Ca(2+) or Ca(2+) + Mg(2+), in Mg(2+) the alpha4beta7-MAdCAM-1 k(off) degrees decreased 20-fold to 0.046 s(-1), and the bond was weaker, providing an explanation for the finding of firm adhesion under these conditions. Shear enhanced tethering to MAdCAM-1, thereby contributing to the stability of rolling. Comparisons to selectins demonstrate that the kinetic and mechanical properties of the alpha4beta7 integrin are well suited to its intermediate position in adhesion cascades, in which it bridges rapid rolling through selectins to firm adhesion through beta2 integrins.

Effector differentiation is not prerequisite for generation of memory cytotoxic T lymphocytes.

The lineage relationship between short-lived effector T cells and long-lived memory cells is not fully understood. We have described T-GFP mice previously, in which naive and early activated T cells express GFP uniformly, whereas cells that have differentiated into effector cytotoxic T cells selectively lose GFP expression. Here we studied antigen-specific CD8 T cell differentiation using T-GFP mice crossed to the TCR transgenic (Tg) mice P14 (specific for the lymphocytic choriomeningitis virus glycoprotein peptide, gp33-41). After activation with antigenic peptide, P14XT-GFP CD8(+) T cells cultured in high-dose IL-2 developed into cells with effector phenotype and function: they were blastoid, lost GFP expression, expressed high levels of activation and effector markers, and were capable of immediate cytotoxic function. In contrast, cells cultured in IL-15 or low-dose IL-2 never developed into full-fledged effector cells. Rather, they resembled memory cells: they were smaller, were GFP(+), did not express effector markers, and were incapable of immediate cytotoxicity. However, they mediated rapid-recall responses in vitro. After adoptive transfer, they survived in vivo for at least 10 weeks and mounted a secondary immune response after antigen rechallenge that was as potent as endogenously generated memory cells. In addition to providing a simple means to generate memory cells in virtually unlimited numbers, our results suggest that effector differentiation is not a prerequisite for memory cell generation.

Definition of EGF-like, closely interacting modules that bear activation epitopes in integrin beta subunits.

Integrin beta subunits contain four cysteine-rich repeats in a long extracellular stalk that connects the headpiece to the membrane. Most mAbs to integrin activation epitopes map to these repeats, and they are important in propagating conformational signals from the membrane/cytosol to the ligand-binding headpiece. Sequence analysis of a protein containing only 10 integrin-like, cysteine-rich repeats suggests that these repeats start one cysteine earlier than previously reported. By using the new repeat boundaries, statistically significant sequence homology to epidermal growth factor-like domains is found, and a disulfide bond connectivity of the eight cysteines is predicted that differs in three of four disulfides from a previous prediction of epidermal growth factor-like modules [Berg, R. W., Leung, E., Gough, S., Morris, C., Yao, W.-P., Wang, S.-x., Ni, J. & Krissansen, G. W. (1999) Genomics 56, 169-178]. N-terminally truncated beta2 integrin stalk fragments were well expressed and secreted from 293 T cells when they began at repeat boundaries but not when they began one cysteine earlier or later. Furthermore, peptides that correspond to module 3 or modules 2 + 3 were expressed in bacteria and refolded. The module 2 + 3 fragment was as reactive with three mAbs to activation epitopes as a beta2 fragment expressed in eukaryotic cells, indicating a native fold. Only one residue intervenes between the last cysteine of one module and the first cysteine of the next. This arrangement is consistent with a tight intermodule connection, a prerequisite for signal propagation from the membrane to the ligand binding headpiece.

Amino acid residues in the alpha IIb subunit that are critical for ligand binding to integrin alpha IIbbeta 3 are clustered in the beta-propeller model.

Several distinct regions of the integrin alpha(IIb) subunit have been implicated in ligand binding. To localize the ligand binding sites in alpha(IIb), we swapped all 27 predicted loops with the corresponding sequences of alpha(4) or alpha(5). 19 of the 27 swapping mutations had no effect on binding to both fibrinogen and ligand-mimetic antibodies (e.g. LJ-CP3), suggesting that these regions do not contain major ligand binding sites. In contrast, swapping the remaining 8 predicted loops completely blocked ligand binding. Ala scanning mutagenesis of these critical predicted loops identified more than 30 discontinuous residues in repeats 2-4 and at the boundary between repeats 4 and 5 as critical for ligand binding. Interestingly, these residues are clustered in the predicted beta-propeller model, consistent with this model. Most of the critical residues are located at the edge of the upper face of the propeller, and several critical residues are located on the side of the propeller domain. None of the predicted loops in repeats 1, 6, and 7, and none of the four putative Ca(2+)-binding predicted loops on the lower surface of the beta-propeller were important for ligand binding. The results map an important ligand binding interface at the edge of the top and on the side of the beta-propeller toroid, centering on repeat 3.

IL-8 production in human lung fibroblasts and epithelial cells activated by the Pseudomonas autoinducer N-3-oxododecanoyl homoserine lactone is transcriptionally regulated by NF-kappa B and activator protein-2.

The destructive pulmonary inflammation associated with Pseudomonas aeruginosa colonization is caused, in part, by the production of the chemokine IL-8, which recruits neutrophils into the lung. The Pseudomonas autoinducer, N-3-oxododecanoyl homoserine lactone (3-O-C12-HSL), is a small lipid-soluble molecule that is essential in the regulation of many P. aeruginosa virulence factors, but little is known about how it affects eukaryotic cells. In this report we demonstrate that 3-O-C12-HSL is a potent stimulator of both IL-8 mRNA and protein from human fibroblasts and epithelial cells in vitro. The IL-8 produced from these 3-O-C12-HSL-stimulated cells was found to be functionally active by inducing the chemotaxis of neutrophils. To determine a mechanism for this IL-8 induction, deletion constructs of the IL-8 promoter were examined. It was found that the DNA region between nucleotides -1481 and -546 and the transcription factor NF-kappaB were essential for the maximal induction of IL-8 by 3-O-C12-HSL. This was confirmed by EMSAs, where 3-O-C12-HSL induced a shift with both AP-2 and NF-kappaB consensus DNA. The activation of NF-kappaB and subsequent production of IL-8 were found to be regulated by a mitogen-activated protein kinase pathway. These findings support the concept that the severe lung damage that accompanies P. aeruginosa infections is caused by an exuberant neutrophil response stimulated by 3-O-C12-HSL-induced IL-8. Understanding the mechanisms of 3-O-C12-HSL activation of lung structural cells may provide a means to help control lung damage during infections with P. aeruginosa.

Ultrastructure and function of dimeric, soluble intercellular adhesion molecule-1 (ICAM-1).

Previous studies have demonstrated dimerization of intercellular adhesion molecule-1 (ICAM-1) on the cell surface and suggested a role for immunoglobulin superfamily domain 5 and/or the transmembrane domain in mediating such dimerization. Crystallization studies suggest that domain 1 may also mediate dimerization. ICAM-1 binds through domain 1 to the I domain of the integrin alpha(L)beta(2) (lymphocyte function-associated antigen 1). Soluble C-terminally dimerized ICAM-1 was made by replacing the transmembrane and cytoplasmic domains with an alpha-helical coiled coil. Electron microscopy revealed C-terminal dimers that were straight, slightly bent, and sometimes U-shaped. A small number of apparently closed ring-like dimers and W-shaped tetramers were found. To capture ICAM-1 dimerized at the crystallographically defined dimer interface in domain 1, cysteines were introduced into this interface. Several of these mutations resulted in the formation of soluble disulfide-bonded ICAM-1 dimers (domain 1 dimers). Combining a domain 1 cysteine mutation with the C-terminal dimers (domain 1/C-terminal dimers) resulted in significant amounts of both closed ring-like dimers and W-shaped tetramers. Surface plasmon resonance studies showed that all of the dimeric forms of ICAM-1 (domain 1, C-terminal, and domain 1/C-terminal dimers) bound similarly to the integrin alpha(L)beta(2) I domain, with affinities approximately 1.5--3-fold greater than that of monomeric ICAM-1. These studies demonstrate that ICAM-1 can form at least three different topologies and that dimerization at domain 1 does not interfere with binding in domain 1 to alpha(L)beta(2).

Dimerization and the effectiveness of ICAM-1 in mediating LFA-1-dependent adhesion.

Dimeric intercellular adhesion molecule-1 (ICAM-1) binds more efficiently to lymphocyte function-associated antigen-1 (LFA-1) than monomeric ICAM-1. However, it is unknown whether dimerization enhances binding simply by providing two ligand-binding sites and thereby increasing avidity, or whether it serves to generate a single "fully competent" LFA-1-binding surface. Domain 1 of ICAM-1 contains both the binding site for LFA-1, centered on residue E34, and a homodimerization interface. Whether the LFA-1-binding site extends across the homodimerization interface has not been tested. To address this question, we constructed four different heterodimeric soluble forms of ICAM-1 joined at the C terminus via an alpha-helical coiled coil (ACID-BASE). These heterodimeric ICAM-1 constructs include, (i) E34/E34 (two intact LFA-1-binding sites), (ii) E34/K34 (one disrupted LFA-1-binding site), (iii) E34/DeltaD1-2 (one deleted LFA-1-binding site), and (iv) K34/K34 (two disrupted LFA-1-binding sites). Cells bearing activated LFA-1 bound similarly to surfaces coated with either E34/K34 or E34/DeltaD1-2 and with an approximately 2-fold reduction in efficiency compared with E34/E34, suggesting that D1 dimerization, which is precluded in E34/DeltaD1-D2, is not necessary for optimal LFA-1 binding. Furthermore, BIAcore (BIAcore, Piscataway, NJ) affinity measurements revealed that soluble open LFA-1 I domain bound to immobilized soluble ICAM-1, E34/E34, E34/K34, and E34/DeltaD1-D2 with nearly identical affinities. These studies demonstrate that a single ICAM-1 monomer, not dimeric ICAM-1, represents the complete, "fully competent" LFA-1-binding surface.

Reversibly locking a protein fold in an active conformation with a disulfide bond: integrin alphaL I domains with high affinity and antagonist activity in vivo.

The integrin alphaLbeta2 has three different domains in its headpiece that have been suggested to either bind ligand or to regulate ligand binding. One of these, the inserted or I domain, has a fold similar to that of small G proteins. The I domain of the alphaM and alpha2 subunits has been crystallized in both open and closed conformations; however, the alphaL I domain has been crystallized in only the closed conformation. We hypothesized that the alphaL domain also would have an open conformation, and that this would be the ligand binding conformation. Therefore, we introduced pairs of cysteine residues to form disulfides that would lock the alphaL I domain in either the open or closed conformation. Locking the I domain open resulted in a 9,000-fold increase in affinity to intercellular adhesion molecule-1 (ICAM-1), which was reversed by disulfide reduction. By contrast, the affinity of the locked closed conformer was similar to wild type. Binding completely depended on Mg(2+). Orders of affinity were ICAM-1 > ICAM-2 > ICAM-3. The k(on), k(off), and K(D) values for the locked open I domain were within 1.5-fold of values previously determined for the alphaLbeta2 complex, showing that the I domain is sufficient for full affinity binding to ICAM-1. The locked open I domain antagonized alphaLbeta2-dependent adhesion in vitro, lymphocyte homing in vivo, and firm adhesion but not rolling on high endothelial venules. The ability to reversibly lock a protein fold in an active conformation with dramatically increased affinity opens vistas in therapeutics and proteomics.

Implications for familial hypercholesterolemia from the structure of the LDL receptor YWTD-EGF domain pair.

The low-density lipoprotein receptor (LDLR) is the primary mechanism for uptake of cholesterol-carrying particles into cells. The region of the LDLR implicated in receptor recycling and lipoprotein release at low pH contains a pair of calcium-binding EGF-like modules, followed by a series of six YWTD repeats and a third EGF-like module. The crystal structure at 1.5 A resolution of a receptor fragment spanning the YWTD repeats and its two flanking EGF modules reveals that the YWTD repeats form a six-bladed beta-propeller that packs tightly against the C-terminal EGF module, whereas the EGF module that precedes the propeller is disordered in the crystal. Numerous point mutations of the LDLR that result in the genetic disease familial hypercholesterolemia (FH) alter side chains that form conserved packing and hydrogen bonding interactions in the interior and between propeller blades. A second subset of FH mutations are located at the interface between the propeller and the C-terminal EGF module, suggesting a structural requirement for maintaining the integrity of the interdomain interface.