New biologically active ionic liquids with benzethonium cation-efficient SAR inducers and antimicrobial agents.

BACKGROUND: An urgent need to find new methods for crop protection remains open due to the withdrawal from the market of the most toxic pesticides and increasing consumer awareness. One of the alternatives that can be used in modern agriculture is the use of bifunctional compounds whose actions towards plant protection are wider than those of conventional pesticides. RESULTS: In this study, we present the investigation of the biological efficacy of nine dual-functional salts containing a systemic acquired resistance (SAR)-inducing anion and the benzethonium cation. A significant result of the presented study is the discovery of the SAR induction activity of benzethonium chloride, which was previously reported only as an antimicrobial agent. Moreover, the concept of dual functionality was proven, as the application of presented compounds in a given concentrations resulted both in the control of human and plant bacteria species and induction of SAR. CONCLUSION: The strategy presented in this article shows the capabilities of derivatization of common biologically active compounds into their ionic derivatives to obtain bifunctional salts. This approach may be an example of the design of potential new compounds for modern agriculture. It provides plants with two complementary actions allowing to provide efficient protection to plants, if one mode of action is ineffective. © 2024 Society of Chemical Industry.

Application of Salicylic Acid Derivative in Modifying the Iron Nutritional Value of Lettuce (Lactuca sativa L.).

The present experiment addressed the effects of foliar sprays of different iron (Fe) concentrations (mg L-1), i.e., 2.8 (Fe I), 4.2 (Fe II), and 5.6 (Fe III), as well as an ionic derivative of salicylic acid (iSal) in two doses (10 and 20 mg L-1) on lettuce yield, chlorophyll and carotenoids content, and fluorescence parameters. Chemicals were used individually and in combinations two times, 23 and 30 days after the plants were transplanted. This experiment was carried out in a climate chamber. The Fe and iSal applications generally (except Fe I iSal, 10 mg L-1; Fe I iSal, 20 mg L-1; and Fe III iSal, 20 mg L-1) did not influence the fresh and dry matter content. The concentration of chlorophylls and carotenoids was reduced for all treatments in comparison to the control (without spraying). The Fe content in leaves was promoted in the Fe-treated plants (+70% for Fe III + iSal, 10 mg L-1, and Fe I). The iSal treatment promoted the Mn content. For most combinations, the Zn and Cu accumulations, as well as the fluorescence parameters, decreased after the foliar spray applications. Overall, our study revealed the effectiveness of Fe-DTPA chelate, but not iSal, in increasing the Fe content of lettuce grown in soilless cultivation systems.

Influence of Magnetron Sputtering-Deposited Niobium Nitride Coating and Its Thermal Oxidation on the Properties of AISI 316L Steel in Terms of Its Medical Applications.

An NbN coating was produced on AISI 316L steel using reactive DC magnetron sputtering. The effects of oxidation of the NbN coating in air on the microstructure, mechanical properties, corrosion resistance, contact angle and bioactivity were investigated. Phase composition was determined using X-ray diffraction (XRD), the coatings' cross-sectional microstructure and thickness including surface morphology using a scanning electron microscope (SEM), microhardness via the Vickers method, corrosion by means of a potentiodynamic polarisation test in Ringer's solution and bioactivity by observation in an SBF solution, while the contact angle was studied using a goniometer. The NbN coating and the oxidised coating were shown to demonstrate a Ca/P ratio close to that of hydroxyapatite, as well as increased microhardness and corrosion resistance. The best combination of mechanical, corrosion, bioactivity and hydrophilic properties was demonstrated by the air oxidised NbN coating, which featured an orthorhombic Nb2O5 structure in the top, surface layer.

From Poly(glycerol itaconate) Gels to Novel Nonwoven Materials for Biomedical Applications.

Electrospinning is a process that has attracted significant interest in recent years. It provides the opportunity to produce nanofibers that mimic the extracellular matrix. As a result, it is possible to use the nonwovens as scaffolds characterized by high cellular adhesion. This work focused on the synthesis of poly(glycerol itaconate) (PGItc) and preparation of nonwovens based on PGItc gels and polylactide. PGItc gels were synthesized by a reaction between itaconic anhydride and glycerol. The use of a mixture of PGItc and PLA allowed us to obtain a material with different properties than with stand-alone polymers. In this study, we present the influence of the chosen ratios of polymers and the OH/COOH ratio in the synthesized PGItc on the properties of the obtained materials. The addition of PGItc results in hydrophilization of the nonwovens' surface without disrupting the high porosity of the fibrous structure. Spectral and thermal analyzes are presented, along with SEM imagining. The preliminary cytotoxicity research showed that nonwovens were non-cytotoxic materials. It also helped to pre-determine the potential application of PGItc + PLA nonwovens as subcutaneous tissue fillers or drug delivery systems.

Resistance Inducers for the Protection of Pedunculate Oak (Quercus robur L.) Seedlings against Powdery Mildew Erysiphe alphitoides.

Oak powdery mildew caused by Erysiphe alphitoides (Griffon and Maubl.; U. Braun & S. Takam.) is a common disease in European forests. One of the most susceptible species is the pedunculate oak (Quercus robur L.). Presently, a few methods are available to control powdery mildew, e.g., the use of fungicides (e.g., based on citric acid), antagonistic fungi or bacteria, chemical treatments (e.g., sulphur, potassium bicarbonate) or genetic resistance. In our study, we aimed to check the effects of using chitosan derivatives and novel active substances inducing the plants' natural resistance: benzodiathiadiazole (both in neutral and salt form). 84 pedunculate oak seedlings were subjected to the experiment in three treatment variants (plus positive and negative controls). The plants were treated with active substances and inoculated with E. alphitoides. Although the powdery mildew symptoms appeared in all variants, they were manifested mainly by the mycelium in the form of small spots. The experiment indicated that the highest limitation of powdery mildew mycelium was achieved by applying N-methyl-N-methoxyamide-7-carboxybenzo(1,2,3)thiadiazole (BTHWA). The application of BTHWA reduced disease development by 88.9% when compared to the effects of the other variants.

Synthesis, characterization and biological activity of bifunctional ionic liquids based on dodine ion.

BACKGROUND: Development of new plant protection strategies has become an urgent matter in modern agriculture, in view of the evidently proved negative effect of currently used active ingredients of pesticides. In recent years, much effort has been made to eliminate the use of pesticides established to be toxic to pollinators. RESULTS: In this study, we present a group of new bifunctional ionic liquids based on dodine (N-dodecylguanidine) cation whose physical and biological properties have been modified relative to those of the commercially available N-dodecylguanidine acetate. The decreased level of residue of active substances in plant tissues reduces their availability to pollinators, which increases the safety of their use. Moreover, lower environmental impact in combination with high antifungal activity and an additional biological function, that is the systemic acquired resistance induction, are in line with the goals of sustainable agriculture. CONCLUSION: The presented approach shows the possibility of derivatization of commonly used fungicide into the form of bifunctional salts whose physical and biological properties can be easily modified. The paper reports successful design and synthesis of new sustainable and green chemicals for the modern agriculture, being less toxic to the environment and human health but still effective against pathogens. © 2021 Society of Chemical Industry.

A New Benzothiadiazole Derivative with Systemic Acquired Resistance Activity in the Protection of Zucchini (Cucurbita pepo convar. giromontiina) against Viral and Fungal Pathogens.

The ability of plant resistance inducers to provide protection against viral diseases is one of their main advantages over conventional pesticides. In the case of viral diseases that cannot be controlled directly with pesticides, insecticides are used to control the vectors of viruses. However, the effectiveness of such treatments is strictly dependent on the time of application. The plant response to the application of systemic acquired resistance (SAR) inducers, as a result of the stimulating action of these substances, does not depend on the time of application as it triggers the plant's natural defence mechanism. The best-recognised substance showing SAR inducer activity is acibenzolar-S-methyl ester (ASM, BTH). As its activity against different plant pathogens of crops has been well documented, the current research is concentrated on the search for novel substances of the type. The tested substance, N-methoxy-N-methylbenzo(1,2,3)thiadiazole-7-carboxamide (BTHWA), is an amide derivative of benzothiadiazole, showing plant resistance-inducing activity. This article presents the activity of BTHWA that has led to increased resistance of zucchini (Cucurbita pepo convar. giromontiina) towards viral infections. In addition, since the occurrence of the fungal pathogen, powdery mildew, was also observed during the two-year field experiments, the activity of BTHWA related to the reduction of infection with this fungus was also investigated. The substance was applied in two different variants either four or eight times, over the whole vegetation season. Surprisingly, the variant of four applications performed at the beginning of the vegetation season proved more effective in protection against viruses and fungus. A possible explanation may be the occurrence of the growth-immunity trade-off phenomenon that is known in the literature. Disturbance in plant metabolism resulting from eight applications may lead to lower yields of plants treated with SAR inducers. Perhaps such overstimulation of the plants we treated eight times may not have brought the optimum increase in plant resistance.

Push-Out Method for Micro Measurements of Interfacial Strength in Aluminium Alloy Matrix Composites.

The main goal of this work was the evaluation of the interfacial strength of the carbon fibres/aluminium matrix interface dependently on the utilised composite fabrication method, namely high pressure die casting and gas pressure infiltration. In addition, the influence of a Ni-P coating on the C-fibres was investigated. The proposed measurements of the interfacial strength were carried out by means of the "push-out" method. The interfacial strength of the samples fabricated using the high-pressure infiltration method average between 19.03 MPa and 45.34 MPa.

Changes in the expression level of genes encoding transcription factors and cell wall-related proteins during Meloidogyne arenaria infection of maize (Zea mays).

BACKGROUND: Meloidogyne arenaria is an economically important root-knot nematode (RKN) species whose hosts include maize (Zea mays). The plant response to RKN infection activates many cellular mechanisms, among others, changes in the expression level of genes encoding transcription and elongation factors as well as proteins related to cell wall organization. METHODS AND RESULTS: This study is aimed at characterization of expression of selected transcription and elongation factors encoding the genes WRKY53, EF1a, and EF1b as well as the ones encoding two proteins associated with cell wall functioning (glycine-rich RNA-binding protein, GRP and polygalacturonase, PG) during the maize response to M. arenaria infection. The changes in the relative level of expression of genes encoding these proteins were assessed using the reverse transcription-quantitative real-time PCR. The material studied were leaves and root samples collected from four maize varieties showing different susceptibilities toward M. arenaria infection, harvested at three different time points. Significant changes in the expression level of GRP between susceptible and tolerant varieties were observed. CONCLUSIONS: Results obtained in the study suggest pronounced involvement of glycine-rich RNA-binding protein and EF1b in the maize response and resistance to RKN.

Hydrostatic Extrusion and Nano-Hardness of Nanocrystalline Grade 2 Titanium.

The structure and corrosion resistance of Grade 2 titanium subjected to the hydroextrusion processes were examined. The microstructure was characterized using optical microscopy and transmission electron microscopy. The corrosion resistance was determined using the impedance and potentiodynamic methods, in 0.1 M H2SO4 solutions and an acidified 0.1 M NaCl solution with a pH of 4.2, at ambient temperature. Nanohardness tests were performed under a load of 100 mN. It has been demonstrated that the hydroextrusion method makes it possible to obtain relatively homogeneous nanocrystalline titanium Grade 2 with an increased hardness, the elastic modulus almost unchanged with respect to that of the initial structure and a lower corrosion resistance.