Spin-Selective Oxygen Evolution Reaction in Chiral Iron Oxide Nanoparticles: Synergistic Impact of Inherent Magnetic Moment and Chirality.

Electron spin polarization is identified as a promising avenue for enhancing the oxygen evolution reaction (OER), which is the bottleneck that limits the energy efficiency of water-splitting. Here, we report that both ferrimagnetic (f-Fe3O4) and superparamagnetic iron oxide (s-Fe3O4) catalysts can exhibit external magnetic field (Hext)-induced OER enhancement, and the activity is proportional to their intrinsic magnetic moment. Additionally, the chirality-induced spin selectivity (CISS) effect was utilized in synergy with Hext to get a maximum enhancement of up to 89% improvement in current density (at 1.8 V vs RHE) with a low onset potential of 270 mV in s-Fe3O4 catalysts. Spin polarization and the resultant spin selectivity suppress the production of H2O2 and promote the formation of ground state triplet O2 during the OER. Furthermore, the design of chiral s-Fe3O4 with synergistic spin potential effect demonstrates a high spin polarization of ∼42%, as measured using conductive atomic force microscopy (c-AFM).

Additive manufacturing of LiNi1/3Mn1/3Co1/3O2 battery electrode material via vat photopolymerization precursor approach.

Additive manufacturing, also called 3D printing, has the potential to enable the development of flexible, wearable and customizable batteries of any shape, maximizing energy storage while also reducing dead-weight and volume. In this work, for the first time, three-dimensional complex electrode structures of high-energy density LiNi1/3Mn1/3Co1/3O2 (NMC 111) material are developed by means of a vat photopolymerization (VPP) process combined with an innovative precursor approach. This innovative approach involves the solubilization of metal precursor salts into a UV-photopolymerizable resin, so that detrimental light scattering and increased viscosity are minimized, followed by the in-situ synthesis of NMC 111 during thermal post-processing of the printed item. The absence of solid particles within the initial resin allows the production of smaller printed features that are crucial for 3D battery design. The formulation of the UV-photopolymerizable composite resin and 3D printing of complex structures, followed by an optimization of the thermal post-processing yielding NMC 111 is thoroughly described in this study. Based on these results, this work addresses one of the key aspects for 3D printed batteries via a precursor approach: the need for a compromise between electrochemical and mechanical performance in order to obtain fully functional 3D printed electrodes. In addition, it discusses the gaps that limit the multi-material 3D printing of batteries via the VPP process.

Platinum-like HER onset in a GNR/MoS2 quantum dot heterostructure through curvature-dependent electron density reconfiguration.

Tailoring the curvature-directed lattice strain in GNRs along with optimal surface anchoring of molybdenum disulfide (MoS2) quantum dots (QDs) can lead to a unique heterostructure with Pt-like HER activity (onset potential -60 mV). The curvature-induced electronic charge redistribution at the curved region in the graphene nanoribbons allows a facile GNR-MoS2 interfacial charge transfer in the heterostructure, making the interfacial sulfur (S) more active towards the HER. The density functional theory (DFT) calculations confirmed electronically activated interfacial S-based catalytic centers in the curved GNR-based heterostructure leading to Pt-like HER activity.

A double-edged effect of manganese-doped graphene quantum dots on salt-stressed Capsicum annuum L.

The objective of the current study is to evaluate both the positive and negative effects of manganese-doped graphene quantum dots (GQD-Mn) on Capsicum annuum L. grown under salt stress. GQD-Mn was synthesized, characterized, and foliar-applied (250 mg/L, 120 mg/L, 60 mg/L) to C. annuum L. before and after the flowering stage, during which 100 mM of NaCl solution was introduced into the soil as salt stress. Controls were designed as absolute control (no nanomaterials or salt) and negative control (no nanomaterials only salt). Herein, we report that GQD-Mn offset the reduction of fruit production in salt-stressed C. annuum L. by around 40 %. However, based on a comprehensive analysis of normal alkanes (n-alkane) using gas chromatography-mass spectrometry (GC-MS), we also observed that the leaf epicuticular wax profile was disturbed by GQD-Mn, as the concentration of long-chain n-alkanes was increased. Meanwhile, the content of magnesium (Mg) and zinc (Zn) indicated a potential promoted photosynthesis activity in C. annuum L leaves. We hypothesize that the optical properties of GQD-Mn allow leaves to utilize light more efficiently, thus improving photosynthetic activities in plants to acclimate salt stress. But the increased light usage also induced heat stress on the leaf surfaces, which caused n-alkanes changes. Our results provided a unique perspective on nano-plant interaction that value both beneficial and toxic effects of nanomaterials, especially when evaluating the safety of nano-enabled agriculture in areas facing harsh environmental conditions such as salinity.

Lewis Acid Site Assisted Bifunctional Activity of Tin Doped Gallium Oxide and Its Application in Rechargeable Zn-Air Batteries.

The enhanced safety, superior energy, and power density of rechargeable metal-air batteries make them ideal energy storage systems for application in energy grids and electric vehicles. However, the absence of a cost-effective and stable bifunctional catalyst that can replace expensive platinum (Pt)-based catalyst to promote oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) at the air cathode hinders their broader adaptation. Here, it is demonstrated that Tin (Sn) doped ß-gallium oxide (ß-Ga2 O3 ) in the bulk form can efficiently catalyze ORR and OER and, hence, be applied as the cathode in Zn-air batteries. The Sn-doped ß-Ga2 O3 sample with 15% Sn (Snx =0.15 -Ga2 O3 ) displayed exceptional catalytic activity for a bulk, non-noble metal-based catalyst. When used as a cathode, the excellent electrocatalytic bifunctional activity of Snx =0.15 -Ga2 O3 leads to a prototype Zn-air battery with a high-power density of 138 mW cm-2 and improved cycling stability compared to devices with benchmark Pt-based cathode. The combined experimental and theoretical exploration revealed that the Lewis acid sites in ß-Ga2 O3 aid in regulating the electron density distribution on the Sn-doped sites, optimize the adsorption energies of reaction intermediates, and facilitate the formation of critical reaction intermediate (O*), leading to enhanced electrocatalytic activity.

Cylindrical C96 Fullertubes: A Highly Active Metal-Free O2 -Reduction Electrocatalyst.

A new isolation protocol was recently reported for highly purified metallic Fullertubes D5h -C90 , D3d -C96 , and D5d -C100, which exhibit unique electronic features. Here, we report the oxygen reduction electrocatalytic behavior of C60 , C70 (spheroidal fullerenes), and C90 , C96 , and C100 (tubular fullerenes) using a combination of experimental and theoretical approaches. C96 (a metal-free catalyst) displayed remarkable oxygen reduction reaction (ORR) activity, with an onset potential of 0.85 V and a halfway potential of 0.75 V, which are close to the state-of-the-art Pt/C benchmark catalyst values. We achieved an excellent power density of 0.75 W cm-2 using C96 as a modified cathode in a proton-exchange membrane fuel cell, comparable to other recently reported efficient metal-free catalysts. Combined band structure (experimentally calculated) and free-energy (DFT) investigations show that both favorable energy-level alignment active catalytic sites on the carbon cage are responsible for the superior activity of C96 .

Diazonium functionalized fullerenes: a new class of efficient molecular catalysts for the hydrogen evolution reaction.

Considerable efforts are being made to find cheaper and more efficient alternatives to the currently commercially available catalysts based on precious metals for the Hydrogen Evolution Reaction (HER). In this context, fullerenes have started to gain attention due to their suitable electronic properties and relatively easy functionalization. We found that the covalent functionalization of C60, C70 and Sc3N@IhC80 with diazonium salts endows the fullerene cages with ultra-active charge polarization centers, which are located near the carbon-diazonium bond and improve the efficiency towards the molecular generation of hydrogen. To support our findings, Electrochemical Impedance Spectroscopy (EIS), double layer capacitance (Cdl) and Mott-Schottky approximation were performed. Among all the functionalized fullerenes, DPySc3N@IhC80 exhibited a very low onset potential (-0.025 V vs. RHE) value, which is due to the influence of the inner cluster on the extra improvement of the electronic density states of the catalytic sites. For the first time, the covalent assembly of fullerenes and diazonium groups was used as an electron polarization strategy to build superior molecular HER catalytic systems.

Engineering of Electron Affinity and Interfacial Charge Transfer of Graphene for Self-Powered Nonenzymatic Biosensor Applications.

Facile electron transport and intimate electronic contact at the catalyst-electrode interface are critical for the ideal performance of electrochemical devices such as glucose biofuel cells and biosensors. Here, through a comprehensive experimental-theoretical exploration, we demonstrate that engineering of interfacial properties, including interfacial electron dynamics, electron affinity, electrode-catalyst-adsorbate electrical synergy, and electrocatalytically active surface area, can lead to highly efficient graphene-based electrochemical devices. We selected two closely related but electronically and surface chemically different functionalized graphene analogues-graphene acid (GA) and reduced graphene oxide (rGO)-as the model graphenic platforms. Our studies reveal that compared to rGO, GA is a superior bifunctional catalyst with high oxygen reduction reaction (an onset potential of 0.8 V) and good glucose oxidation activities. Spectroscopic and electrochemical analysis of GA and rGO indicated that the higher carboxylic acid content on GA increases its overall electron affinity and coupled with improved conductivity and band alignment, which leads to GA's better electrochemical performance. The formulation of a heterostructure between GA and samarium oxide (Sm2O3) nanoparticles led to augmented conductivity (lower charge-transfer resistance) and glucose binding affinity, resulting in a further enhanced glucose oxidation activity. The interdimensional Sm2O3/GA heterostructure, leveraging their enhanced glucose oxidation capacity, exhibited excellent nonenzymatic amperometric glucose sensing performance, with a detection limit of 107 nM and a sensitivity of 20.8 µA/µM. Further, a nonenzymatic, membrane-free glucose biofuel cell (with Sm2O3/GA heterostructure as anode and GA as biocathode) produced a power density of 3.2 µW·cm-2 (in PBS spiked with 3 mM glucose), which can function as self-powered glucose sensors with 70 nM limit of detection. The study establishes the potential of interfacial engineering of GA to engage it as a highly tunable substrate for a broad range of electrochemical applications, especially in future self-powered biosensors.

A New Class of Molecular Electrocatalysts for Hydrogen Evolution: Catalytic Activity of M3N@C2n (2n = 68, 78, and 80) Fullerenes.

The electrocatalytic properties of some endohedral fullerenes for hydrogen evolution reactions (HER) were recently predicted by DFT calculations. Nonetheless, the experimental catalytic performance under realistic electrochemical environments of these 0D-nanomaterials have not been explored. Here, for the first time, we disclose the HER electrocatalytic behavior of seven M3N@2n (2n = 68, 78, and 80) fullerenes (Gd3N@Ih(7)-C80, Y3N@Ih(7)-C80, Lu3N@Ih(7)-C80, Sc3N@Ih(7)-C80, Sc3N@D5h(6)-C80, Sc3N@D3h(5)-C78, and Sc3N@D3(6140)-C68) using a combination of experimental and theoretical techniques. The non-IPR Sc3N@D3(6140)-C68 compound exhibited the best catalytic performance toward the generation of molecular hydrogen, exhibiting an onset potential of -38 mV vs RHE, a very high mass activity of 1.75 A·mg-1 at -0.4 V vs RHE, and an excellent electrochemical stability, retaining 96% of the initial current after 24 h. The superior performance was explained on the basis of the fused pentagon rings, which represent a new and promising HER catalytic motif.

Co-Cu Bimetallic Metal Organic Framework Catalyst Outperforms the Pt/C Benchmark for Oxygen Reduction.

Platinum (Pt)-based-nanomaterials are currently the most successful catalysts for the oxygen reduction reaction (ORR) in electrochemical energy conversion devices such as fuel cells and metal-air batteries. Nonetheless, Pt catalysts have serious drawbacks, including low abundance in nature, sluggish kinetics, and very high costs, which limit their practical applications. Herein, we report the first rationally designed nonprecious Co-Cu bimetallic metal-organic framework (MOF) using a low-temperature hydrothermal method that outperforms the electrocatalytic activity of Pt/C for ORR in alkaline environments. The MOF catalyst surpassed the ORR performance of Pt/C, exhibiting an onset potential of 1.06 V vs RHE, a half-wave potential of 0.95 V vs RHE, and a higher electrochemical stability (ΔE1/2 = 30 mV) after 1000 ORR cycles in 0.1 M NaOH. Additionally, it outperformed Pt/C in terms of power density and cyclability in zinc-air batteries. This outstanding behavior was attributed to the unique electronic synergy of the Co-Cu bimetallic centers in the MOF network, which was revealed by XPS and PDOS.

Tailoring the Interfacial Interactions of van der Waals 1T-MoS2/C60 Heterostructures for High-Performance Hydrogen Evolution Reaction Electrocatalysis.

Fullerene-based low-dimensional (LD) heterostructures have emerged as excellent energy conversion materials. We constructed van der Waals 1T-MoS2/C60 0D-2D heterostructures via a one-pot synthetic approach for catalytic hydrogen generation. The interfacial 1T-MoS2-C60 and C60-C60 interactions as well as their electrocatalytic properties were finely controlled by varying the weight percentages of the fullerenes. 1T-MoS2 platforms provided a novel template for the formation of C60 nanosheets (NSs) within a very narrow fullerene concentration range. The heterostructure domains of 1T-MoS2 and C60 NSs exhibited excellent hydrogen evolution reaction (HER) performances, with one of the lowest onset potentials and ΔGH* values for LD non-precious nanomaterials reported to date.

Tuning of Trifunctional NiCu Bimetallic Nanoparticles Confined in a Porous Carbon Network with Surface Composition and Local Structural Distortions for the Electrocatalytic Oxygen Reduction, Oxygen and Hydrogen Evolution Reactions.

The rational design of multifunctional catalysts that use non-noble metals to facilitate the interconversion between H2, O2, and H2O is an intense area of investigation. Bimetallic nanosystems with highly tunable electronic, structural, and catalytic properties that depend on their composition, structure, and size have attracted considerable attention. Herein, we report the synthesis of bimetallic nickel-copper (NiCu) alloy nanoparticles confined in a sp2 carbon framework that exhibits trifunctional catalytic properties toward hydrogen evolution (HER), oxygen reduction (ORR), and oxygen evolution (OER) reactions. The electrocatalytic functions of the NiCu nanoalloys were experimentally and theoretically correlated with the composition-dependent local structural distortion of the bimetallic lattice at the nanoparticle surfaces. Our study demonstrated a downshift of the d-band of the catalysts that adjusts the binding energies of the intermediate catalytic species. XPS analysis revealed that the binding energy for Ni 2p3/2 band of the Ni0.25Cu0.75/C nanoparticles was shifted ∼3 times compared to other bimetallic systems, and this was correlated to the high electrocatalytic activity observed. Interestingly, the bimetallic Ni0.25Cu0.75/C catalyst surpassed the OER performance of RuO2 benchmark catalyst exhibiting a small onset potential of 1.44 V vs RHE and an overpotential of 400 mV at 10 mA·cm-2 as well as the electrochemical long-term stability of commercial RuO2 and Pt catalysts and kept at least 90% of the initial current applied after 20 000 s for the OER/ORR/HER reactions. This study reveals significant insight about the structure-function relationship for non-noble bimetallic nanostructures with multifunctional electrocatalytic properties.

Chitosan-Ellagic Acid Nanohybrid for Mitigating Rotenone-induced Oxidative Stress.

Antioxidants derived from nature, such as ellagic acid (EA), demonstrated high potency to mitigate neuronal oxidative stress and related pathologies, including Parkinson's disease. However, the application of EA is limited due to its toxicity at moderate doses and poor solubility, cellular permeability, and bioavailability. Here, we introduce a sustainably resourced, green nanoencasement strategy to overcome the limitations of EA and derive synergistic effects to prevent oxidative stress in neuronal cells. Chitosan, with its high biocompatibility, potential antioxidant properties, and flexible surface chemistry, was chosen as the primary component of the nanoencasement in which EA is immobilized. Using a rotenone model to mimic intracellular oxidative stress, we examined the effectiveness of EA and chitosan to limit cell death. Our studies indicate a synergistic effect between EA and chitosan in mitigating rotenone-induced reactive oxygen species death. Our analysis suggests that chitosan encapsulation of EA reduces the inherent cytotoxicity of the polyphenol (a known anticancer molecule). Furthermore, its encapsulation permits its delivery via a rapid burst phase and a relatively slow phase making the nanohybrid suitable for drug release over extended time periods.

Crystal Chemistry, Band-Gap Red Shift, and Electrocatalytic Activity of Iron-Doped Gallium Oxide Ceramics.

This work for the first time unfurls the fundamental mechanisms and sets the stage for an approach to derive electrocatalytic activity, which is otherwise not possible, in a traditionally known wide band-gap oxide material. Specifically, we report on the tunable optical properties, in terms of wide spectral selectivity and red-shifted band gap, and electrocatalytic behavior of iron (Fe)-doped gallium oxide (ß-Ga2O3) model system. X-ray diffraction (XRD) studies of sintered Ga2-x Fe x O3 (GFO) (0.0 ≤ x ≤ 0.3) compounds provide evidence for the Fe3+ substitution at Ga3+ site without any secondary phase formation. Rietveld refinement of XRD patterns reveals that the GFO compounds crystallize in monoclinic crystal symmetry with a C2/m space group. The electronic structure of the GFO compounds probed using X-ray photoelectron spectroscopy data reveals that at lower concentrations, Fe exhibits mixed chemical valence states (Fe3+, Fe2+), whereas single chemical valence state (Fe3+) is evident for higher Fe content (x = 0.20-0.30). The optical absorption spectra reveal a significant red shift in the optical band gap with Fe doping. The origin of the significant red shift even at low concentrations of Fe (x = 0.05) is attributed to the strong sp-d exchange interaction originated from the 3d5 electrons of Fe3+. The optical absorption edge observed at ≈450 nm with lower intensity is the characteristic of Fe-doped compounds associated with Fe3+-Fe3+ double-excitation process. Coupled with an optical band-gap red shift, electrocatalytic studies of GFO compounds reveal that, interestingly, Fe-doped Ga2O3 compound exhibits electrocatalytic activity in contrast to intrinsic Ga2O3. Fe-doped samples (GFO) demonstrated appreciable electrocatalytic activity toward the generation of H2 through electrocatalytic water splitting. An onset potential and Tafel slope of GFO compounds include ∼900 mV, ∼210 mV dec-1 (x = 0.15) and ∼1036 mV, ∼290 mV dec-1 (x = 0.30), respectively. The electrocatalytic activity of Fe-doped Ga-oxide compounds is attributed to the cumulative effect of different mechanisms such as doping resulting in new catalytic centers, enhanced conductivity, and electron mobility. Hence, in this report, for the first time, we explored a new pathway; the electrocatalytic behavior of Fe-doped Ga2O3 resulted due to Fe chemical states and red shift in the optical band gap. The implications derived from this work may be applicable to a large class of compounds, and further options may be available to design functional materials for electrocatalytic energy production.

Learnings from Protein Folding Projected onto Amyloid Misfolding.

The 1990s saw a revolution in our understanding of the protein folding pathways of both disulfide-bond-containing proteins and purely conformational folders. High-resolution maps of the folding trajectories, made possible by innovative experimental design, revealed the presence of multiple intermediates, their formation and consumption, and the network of interactions between them that lead to the formation of the folded protein from its unfolded state. The same level of detail has heretofore remained elusive as far as the amyloid aggregation pathways of prion-like proteins are concerned. Nevertheless, a recent development that led to the resolution of intermediates in amyloidogenic trajectories, without resort to their separation, is likely to not only advance our basic understanding of the atomic- and molecular-level interactions guiding amyloid misfolding but also impact interventional efforts in their associated pathologies.

Sustainable Animal Protein-Intermeshed Epoxy Hybrid Polymers: From Conquering Challenges to Engineering Properties.

The presence of highly modifiable chemical functional groups, abundance of functional groups, and their biological origin make proteins an important class of biomaterials from a fundamental science and applied engineering perspective. Hence, the utilization of proteins from the animal rendering industry (animal protein, AP) for high-value, nonfeed, and nonfertilizer applications is intensely pursued. Although this leads to the exploration of protein-derived plastics as a plausible alternative, the proposed methods are energy-intensive and not based on protein in its native form, which leads to high processing and production costs. Here, we propose, for the first time, novel pathways to develop engineered hybrid systems utilizing AP in its native form and epoxy resins with mechanical properties ranging from toughened thermosets to elastic epoxy-based systems. Furthermore, we demonstrate the capability to engineer the properties of epoxy-AP hybrids from high-strength hybrids to elastic films through controlling the interaction, hydrophilicity, as well as the extent of cross-linking and network density. Through the facile introduction of cochemicals, a sevenfold increase in the mechanical properties of the conventional epoxy-AP hybrid is achieved. Similarly, because of better compatibility afforded by the similar hydrophilicity, AP demonstrated higher cross-linking capability with a water-soluble epoxy (WEP) matrix, resulting in an elastic WEP-AP hybrid without any external aid.

Interlaced, Nanostructured Interface with Graphene Buffer Layer Reduces Thermal Boundary Resistance in Nano/Microelectronic Systems.

Improving heat transfer in hybrid nano/microelectronic systems is a challenge, mainly due to the high thermal boundary resistance (TBR) across the interface. Herein, we focus on gallium nitride (GaN)/diamond interface-as a model system with various high power, high temperature, and optoelectronic applications-and perform extensive reverse nonequilibrium molecular dynamics simulations, decoding the interplay between the pillar length, size, shape, hierarchy, density, arrangement, system size, and the interfacial heat transfer mechanisms to substantially reduce TBR in GaN-on-diamond devices. We found that changing the conventional planar interface to nanoengineered, interlaced architecture with optimal geometry results in >80% reduction in TBR. Moreover, introduction of conformal graphene buffer layer further reduces the TBR by ∼33%. Our findings demonstrate that the enhanced generation of intermediate frequency phonons activates the dominant group velocities, resulting in reduced TBR. This work has important implications on experimental studies, opening up a new space for engineering hybrid nano/microelectronics.

Confined, Oriented, and Electrically Anisotropic Graphene Wrinkles on Bacteria.

Curvature-induced dipole moment and orbital rehybridization in graphene wrinkles modify its electrical properties and induces transport anisotropy. Current wrinkling processes are based on contraction of the entire substrate and do not produce confined or directed wrinkles. Here we show that selective desiccation of a bacterium under impermeable and flexible graphene via a flap-valve operation produces axially aligned graphene wrinkles of wavelength 32.4-34.3 nm, consistent with modified Föppl-von Kármán mechanics (confinement ∼0.7 × 4 µm(2)). Further, an electrophoretically oriented bacterial device with confined wrinkles aligned with van der Pauw electrodes was fabricated and exhibited an anisotropic transport barrier (ΔE = 1.69 meV). Theoretical models were developed to describe the wrinkle formation mechanism. The results obtained show bio-induced production of confined, well-oriented, and electrically anisotropic graphene wrinkles, which can be applied in electronics, bioelectromechanics, and strain patterning.

Synthesis and Characterization of a Walnut Peptides-Zinc Complex and Its Antiproliferative Activity against Human Breast Carcinoma Cells through the Induction of Apoptosis.

The walnut peptides and zinc ions were combined to generate a walnut peptides-zinc complex (WP1-Zn) with enhanced antiproliferative ability as well as reduced toxicity. The result indicated that Zn ions were successfully combined with WP1 through Zn-N and Zn-O covalent bonds. WP1-Zn compounds exhibited strong antiproliferative ability against the selected human cell lines, especially MCF-7 cells, whose survival rate reduced to 20.02% after exposure to 300 µg/mL of WP1-Zn for 48 h. WP1-Zn inhibited MCF-7 cell proliferation through inducing cell apoptosis and cell cycle arrest. The results indicated that WP1-Zn induced MCF-7 cell apoptosis via the ROS triggered mitochondrial-mediated pathway and cell surface receptor-mediated pathway. Our work is the first attempt to elucidate the synergic effect of novel walnut peptides and Zn and with the hope of better understanding the antiproliferative action of bioactive peptides and a zinc complex and support the potential application of WP1-Zn as a functional food ingredient or complementary medicine.

Heteroatom-doped carbon dots: synthesis, characterization, properties, photoluminescence mechanism and biological applications.

Heteroatom-doped carbon dots (CDs), due to their excellent photoluminescence (PL) properties, attracted widespread attention recently and demonstrated immense promise for diverse applications, particularly for biological applications. The objective of this feature article is to provide a comprehensive overview of the recent progress in the research and development of heteroatom-doped CDs and a detailed description of the influence of single or co-doping heteroatoms on their PL behavior. The most recent understanding and critical insights into the PL mechanism of heteroatom-doped CDs are also highlighted. Moreover, potential bio-related applications of heteroatom-doped CDs in biosensing, bioimaging, and theranostics are also reviewed. This state-of-the-art review will provide a platform for understanding the intricate details of heteroatom-doped CDs, a summary of the latest progress in the field, and related applications in biology and is expected to inspire further developments in this exciting class of materials.