ABSTRACT
Ionic liquid extraction of wood pulp has been highlighted as a highly potential new process for dissolving pulp production. Coproduction with a polymeric hemicellulose fraction was demonstrated in bench scale from softwood kraft pulp using extraction with the ionic liquid 1-ethyl-3-methylimidazolium acetate (EMIM OAc) and water. In total, the recovered pulp and hemicellulose fraction together yielded 95.5 wt.% of the pulp input. The extracted pulp had a remarkably high purity with an R18-value of 97.8%. The hemicellulose fraction consisted of galactoglucomannan, arabinoxylan and some cellulose and was precipitated from the ionic liquid-water mixture. After hydroxypropylation of the hemicellulose fraction, films were prepared and barrier and strength properties were compared to films from other polysaccharides. Reduced oxygen and water vapor permeation and good strength properties were demonstrated when compared to corresponding films from hydroxypropylated xylan from cold caustic extraction. The films have potential for applications in food packaging and edible films.
ABSTRACT
This study focused on the assembly characteristics of debranched xylan onto cellulose surfaces. A rye arabinoxylan polymer with an initial arabinose/xylose ratio of 0.53 was debranched with an oxalic acid treatment as a function of time. The resulting samples contained reduced arabinose/xylose ratios significantly affecting the molecular architecture and solution behavior of the biopolymer. With this treatment, an almost linear xylan with arabinose DS of only 0.04 was obtained. The removal of arabinose units resulted in the self-assembly of the debranched polymer in water into stable nanoparticle aggregates with a size around 300 nm with a gradual increase in crystallinity of the isolated xylan. Using quartz crystal microbalance with dissipation monitoring, the adsorption of xylan onto model cellulose surfaces was quantified. Compared to the nonmodified xylan, the adsorption of debranched xylan increased from 0.6 to 5.5 mg m(-2). Additionally, adsorption kinetics suggest that the nanoparticles rapidly adsorbed to the cellulose surfaces compared to the arabinoxylan. In summary, a control of the molecular structure of xylan influences its ability to form a new class of polysaccharide nanoparticles in aqueous suspensions and its interaction with nanocellulose surfaces.
Subject(s)
Nanoparticles/chemistry , Polysaccharides/chemistry , Surface Properties , Xylans/chemistry , Adsorption , Biopolymers/chemistry , Cellulose/chemistry , Nanoparticles/administration & dosage , Quartz Crystal Microbalance Techniques , Solutions , Water/chemistryABSTRACT
Corncob agricultural waste was used as a source of arabinoxylan for preparation of films. Three arabinoxylan samples were prepared: crude extract (CCAX), purified by a washing step, and purified by bleaching CCAX. Films prepared with untreated CCAX were water soluble, yellowish in color and had poor mechanical properties. After the purification processes the Young's modulus increased from â¼ 293 MPa to â¼ 1400-1600 MPa, and strength was improved from â¼ 9 MPa to around 53 MPa, while the strain at break was kept at â¼ 8% both in untreated and purified CCAX. The contact angle was increased from â¼ 21.3° to 67-74° after washing or bleaching CCAX. Acetylation of bleached CCAX showed the highest thermal resistance (325 °C), had low Tg (125°C) and a high contact angle (80°), and its films were stronger (strength â¼ 67 MPa; Young's modulus â¼ 2241 MPa) and more flexible (â¼ 13%). These characteristics make purified CCAX a suitable material to be used as a matrix for film applications.