Characterisation of whiskeys using solid-phase microextraction with gas chromatography-mass spectrometry.

The application of solid-phase microextraction and gas chromatography-mass spectrometry to the detection of flavour volatiles present in Irish and Scottish whiskeys was investigated. A method was developed to characterise these volatiles which included the extraction, identification and quantification of 17 congeners which included fusel alcohols, acetates and esters. The method validation produced the optimum fibre [85 microm poly(acrylate)], extraction time (35 min), sample volume size (3 ml) and desorption time (5 min). The impact of salt on the absorption process was also studied. Characteristic profiles were determined for each whiskey and the flavour congeners were quantified using 4-methyl-2-pentanol as the internal standard. Calibration ranges were determined for each of the congeners with coefficients of linearity ranging from 0.993 (butan-1-ol) to 0.999 (ethyl laurate) and relative standard deviations ranging from 2.5% (2-methylbutan-1-ol) to 21% (furfural) at a concentration of 18.2 mg/l. Detection limits ranged from 0.1 mg/l (ethyl caprate) to 21 mg/l (butan-2-ol).

Measurement of trihalomethanes in potable and recreational waters using solid phase micro extraction with gas chromatography-mass spectrometry.

Solid phase micro extraction (SPME) was applied to the determination of selected trihalomethanes (THMs), chloroform, bromodichloromethane, dibromochloromethane, bromoform, in potable and recreational waters. The selected samples were environmentally significant due to mandatory limits imposed by regulatory agencies. Extraction of the analytes was performed using headspace SPME (fused silica fibre with a 100 microm poly(dimethylsiloxane coating) followed by thermal desorption at 220 degrees C and GC-MS analysis. A linear working range of 10-160 microg/l was established with relative standard deviations (%RSD) within the range, 0.9-19%. Limits of detection (LOD) were 1.0-2.8 microg/l. The highest THM concentration was 61.8 microg/l which was well within the proposed European Union directive of 100 microg/l. The total THMs determined in swimming pool waters ranged from 105-134 microg/l, with chloroform accounting for 84-86% of total THM.

Sensitive determination of anatoxin-a, homoanatoxin-a and their degradation products by liquid chromatography with fluorimetric detection.

Cyanobacterial neurotoxins have been implicated in animal deaths resulting from drinking contaminated water. Anatoxin-a (AN) and homoanatoxin-a (HMAN) have previously been analysed using high-performance liquid chromatography (HPLC) with UV detection, but this procedure is insufficiently sensitive and is subject to interferences. A sensitive fluorimetric (FL) method for determining AN was recently developed using derivatisation with 4-fluoro-7-nitro-2,1,3-benzoxadiazole (NBD-F) and this has been applied to the simultaneous determination of AN, HMAN and their epoxy and dihydro degradation products. Microscale syntheses were used to prepare the dihydro and epoxy derivatives from AN and HMAN. These compounds were produced in high yields, as confirmed by electrospray MS and HPLC-FL of their benzoxadiazole derivatives. All six NBD derivatives were readily separated using isocratic reversed-phase HPLC. The recoveries of these compounds from spiked water samples, using weak cation-exchange (WCX) solid-phase extraction (SPE), were 83.2-84.9% at concentrations of 10 micrograms/l. The R.S.D. values were 1.7-3.9% (n = 8) and the limits of detection were better than 10 ng/l for all six compounds, illustrating the high sensitivity of the method. This methodology was successfully applied to the analysis toxin degradation products in natural samples. Dihydroanatoxin-a (0.8 mg/g) was isolated from a benthic Oscillatoria bloom from Caragh Lake, Ireland, and was found to contain two isomers but their ratio was different from that found in the synthetic material.

Anatoxin-a in Irish freshwater and cyanobacteria, determined using a new fluorimetric liquid chromatographic method.

A new sensitive high-performance liquid chromatographic (HPLC) method was used to determine anatoxin-a in freshwater, following blooms of cyanobacteria (blue-green algae). Anatoxin-a was converted into a highly fluorescent derivative using 4-fluoro-7-nitro-2,1,3-benzoxadiazole and HPLC analysis gave good linear calibrations even at low concentration ranges (1-10 micrograms/liter, r = 0.997). The detection limit for anatoxin-a was 0.02 ng/ml, and this new HPLC method should prove useful for the routine analysis of potable waters. Anatoxin-a was discovered in three major lakes in Ireland using this method and identification was confirmed using gas chromatraphy-mass spectrometry (GC-MS), following acetylation. Anatoxin-a was found in Anabaena, a planktonic cyanobacterium, as well as in a benthic Oscillatoria species. This is the first identification of anatoxin-a in Irish freshwater and this toxin was also implicated as the causative agent in incidents of fatal canine neurotoxicosis.