Quantification of Zonisamide in Dried Blood Spots and Dried Plasma Spots by UPLC-MS/MS: Application to Clinical Practice.

In this research, a UHPLC-MS/MS method was developed and validated for the determination of zonisamide in dried plasma spots (DPS) and dried blood spots (DBS). Detection of zonisamide and internal standard, 1-(2,3-dichlorphenyl)piperazine, was carried out in ESI+ mode by monitoring two MRM transitions per analyte. Total run time, less than 2.5 min, was achieved using Acquity UPLC BEH Amide (2.1 × 100 mm, 1.7 µm particle size) column with mobile phase comprising acetonitrile-water (85:15%, v/v) with 0.075% formic acid. The flow rate was 0.225 mL/min, the column temperature was 30 °C and the injection volume was 3 µL. Desolvation temperature, desolvation gas flow rate, ion source temperature and cone gas flow rate were set by the IntelliStart software tool in combination with tuning. All of the Guthrie cards were scanned, and DPS/DBS areas were determined by the image processing tool. The influence of hematocrit values (20-60%) on accuracy and precision was evaluated to determine the range within which method for DBSs is free from Hct or dependency is within acceptable limits. The validated method was applied to the determination of zonisamide levels in DPS and DBS samples obtained from patients confirming its suitability for clinical application. Finally, the distribution of zonisamide into the red blood cells was estimated by correlating its DPS and DBS levels.

Analytical Quality by Design-based development and validation of ultra pressure liquid chromatography/MS/MS method for glycopeptide antibiotics determination in human plasma.

AIM: An ultra pressure liquid chromatography (UPLC)/MS/MS method for vancomycin and teicoplanin determination in human plasma was developed in accordance with analytical quality by design (AQbD) concept and fully validated. MATERIALS & METHODS: Chromatographic separation was performed on ACQUITY UPLC C18 charge surface hybrid (CSH) column (2.1 mm × 50 mm, 1.7 µm particle size) in gradient mode and the mobile phase consisted of 0.1% formic acid in water and pure acetonitrile. The experimental design methodology was used for the definition of optimal chromatographic and protein precipitation conditions. RESULTS: The linearity ranges were 0.05-10 µg ml-1 for vancomycin and 0.5-200 µg ml-1 for total teicoplanin. The relative standard deviations for precision estimation were below 15% and the accuracy was within 85-115% for all quality control levels. CONCLUSION: The method was utilized for glycopeptide antibiotics bioanalysis.

Determination of olopatadine in human tears by hydrophilic interaction liquid chromatography-MS/MS method.

AIM: The objective of the study was development of hydrophilic interaction liquid chromatography-ESI/MS/MS method for the determination of olopatadine in tear matrix. MATERIALS & METHODS: Separation was performed on Acquity BEH amide column (2.1 × 100 mm, 1.7 µm). The mobile phase was consisted of 0.1% formic acid in water and acetonitrile. Mianserin hydrochloride was implemented as an internal standard. The artificial tear fluid was used as matrix. The tear samples were collected using Schirmer test strips. For the optimization of ultra pressure liquid chromatography conditions, Box-Benhken design was utilized. RESULTS: The optimal values of the ion source and collision cell parameters were found. Quantification was performed in multiple reaction monitoring mode. The optimized method was fully validated. CONCLUSION: The proposed method was utilized for monitoring of olopatadine in human tear.

Quality by Design in the development of hydrophilic interaction liquid chromatography method with gradient elution for the analysis of olanzapine.

This paper deals with the development of hydrophilic interaction liquid chromatography (HILIC) method with gradient elution, in accordance with Analytical Quality by Design (AQbD) methodology, for the first time. The method is developed for olanzapine and its seven related substances. Following step by step AQbD methodology, firstly as critical process parameters (CPPs) temperature, starting content of aqueous phase and duration of linear gradient are recognized, and as critical quality attributes (CQAs) separation criterion S of critical pairs of substances are investigated. Rechtschaffen design is used for the creation of models that describe the dependence between CPPs and CQAs. The design space that is obtained at the end is used for choosing the optimal conditions (set point). The method is fully validated at the end to verify the adequacy of the chosen optimal conditions and applied to real samples.

Application of Analytical Quality by Design concept for bilastine and its degradation impurities determination by hydrophilic interaction liquid chromatographic method.

This paper deals with the development of hydrophilic interaction liquid chromatographic (HILIC) method for the analysis of bilastine and its degradation impurities following Analytical Quality by Design approach. It is the first time that the method for bilastine and its impurities is proposed. The main objective was to identify the conditions where an adequate separation in minimal analysis duration could be achieved within a robust region. Critical process parameters which have the most influence on method performance were defined as acetonitrile content in the mobile phase, pH of the aqueous phase and ammonium acetate concentration in the aqueous phase. Box-Behnken design was applied for establishing a relationship between critical process parameters and critical quality attributes. The defined mathematical models and Monte Carlo simulations were used to identify the design space. Fractional factorial design was applied for experimental robustness testing and the method is validated to verify the adequacy of selected optimal conditions: the analytical column Luna(®) HILIC (100mm×4.6mm, 5µm particle size); mobile phase consisted of acetonitrile-aqueous phase (50mM ammonium acetate, pH adjusted to 5.3 with glacial acetic acid) (90.5:9.5, v/v); column temperature 30°C, mobile phase flow rate 1mLmin(-1), wavelength of detection 275nm.

Hydrophilic interaction liquid chromatography in analysis of granisetron HCl and its related substances. Retention mechanisms and method development.

In this paper separation of granisetron and its two related substances in HILIC mode is presented. Separation was done on silica column derivatized with sulfoalkylbetaine groups (ZIC-HILIC). Firstly, retention mechanisms were assessed whereby retention factors of substances were followed in wide range of acetonitrile content (80-97%), at constant concentration of aqueous buffer (10mM) as well as at constant pH value of 3.0. Further, in order to developed optimal HILIC method, Design of Experiments (DoE) methodology was applied. For optimization full factorial design 3(2) was employed. Influence of acetonitrile content and ammonium acetate concentration were investigated while pH of the water phase was kept at 3.3. Adequacy of obtained mathematical models was confirmed by ANOVA. Optimization goals (α>1.15 and minimal run time) were accomplished with 94.7% of acetonitrile in mobile phase and 70 mM of ammonium acetate in water phase. Optimal point was in the middle of defined Design Space. In the next phase, robustness was experimetally tested by Rechtschaffen design. The investigated factors and their levels were: acetonitrile content (±1%), ammonium acetate molarity in water phase (±2 mM), pH value of water phase (±0.2) and column temperature (±4 °C). The validation scope included selectivity, linearity, accuracy and precision as well as determination of limit of detection (LOD) and limit of quantification (LOQ) for the related substances. Additionally, the validation acceptance criteria were met in all cases. Finally, the proposed method could be successfully utilized for estimation of granisetron HCl and its related substances in tablets and parenteral dosage forms, as well as for monitoring degradation under various stress conditions.