Direct carbocyclizations of benzoic acids: catalyst-controlled synthesis of cyclic ketones and the development of tandem aHH (acyl Heck-Heck) reactions.

The formation of exo-methylene indanones and indenones from simple ortho-allyl benzoic acid derivatives has been developed. Selective formation of the indanone or indenone products in these reactions is controlled by choice of ancillary ligand. This new process has a low environmental footprint as the products are formed in high yields using low catalyst loadings, while the only stoichiometric chemical waste generated from the reactants in the transformation is acetic acid. The conversion of the active cyclization catalyst into the Hermman-Beller palladacycle was exploited in a one-pot tandem acyl Heck-Heck (aHH) reaction, and utilized in the synthesis of donepezil.

A survey of sulfide ligands for allylic C-H oxidations of terminal olefins.

Perfect to a THT! Screening a diverse library of thioether ligands led to the discovery of tetrahydrothiophene (THT) as a highly reactive and selective ligand for Pd-catalyzed allylic CH oxidation reactions. This novel ligand system provides some of the highest reported yields for the formation of (E)-linear allylic acetates through allylic CH activation chemistry (BQ = 1,4-benzoquinone).

Palladium-catalyzed reactions of enol ethers: access to enals, furans, and dihydrofurans.

The palladium-catalyzed oxidation of alkyl enol ethers to enals, which employs low loadings of a palladium catalyst, is described. The mild oxidation conditions tolerate a diverse array of functional groups, while allowing the formation of di-, tri-, and tetrasubtituted olefins. The application of this methodology to intramolecular reactions of alkyl enol ethers containing pendant alcohols provides furan and 2,5-dihydrofuran products.

Synthesis of diaryl ketones via a phosphine-free Fukuyama reaction.

The synthesis of unsymmetrical diaryl ketones via the Fukuyama coupling of thioesters and organozinc reagents is described. Typically, the synthesis of diaryl ketones using this methodology provides low yields. The simple complex, Pd(dba)(2), was found to convert a variety of aryl thioesters to diaryl ketones in good yields.

Oxidant-controlled stereoselectivity in the Pd-catalyzed allylic oxidation of cis-vinylsilanes.

The allylic oxidation of cis-vinylsilanes is reported. The reaction requires a low catalyst loading of Pd(OAc)(2) without the need for an external ligand. Interestingly, trans-vinylsilanes are unreactive, whereas allylic oxidations of cis-vinylsilanes proceed in good yields giving a single diastereo- and regioisomer of the branched allylic acetate trans-vinylsilane when benzoquinone is employed. The use of PhI(OAc)(2) as oxidant in place of benzoquinone provides the branched, cis-vinylsilane as the major product. Additionally, the first intramolecular allylic C-H etherifications of cis-vinylsilanes to give oxygen heterocycles are also described.

Development of an asymmetric trimethylenemethane cycloaddition reaction: application in the enantioselective synthesis of highly substituted carbocycles.

A protocol for the enantioselective [3+2] cycloaddition of trimethylenemethane (TMM) with electron-deficient olefins has been developed. The synthesis of novel phosphoramidite ligands was critical in this effort, and the preparation and reactivity of these ligands is detailed. The evolution of the ligand design, commencing with acyclic amine-derived phosphoramidites and leading to cyclic pyrrolidine and azetidine structures, is discussed. The conditions developed to effect an asymmetric TMM reaction using 2-trimethylsilylmethyl allyl acetate were shown to be tolerant of a wide variety of alkene acceptors, providing the desired methylenecyclopentanes with high levels of enantioselectivity. The donor scope was also explored, and substituted systems were tolerated, including one bearing a nitrile moiety. These donors were reactive with unsaturated acylpyrroles, giving the product cyclopentane rings bearing three stereocenters in high enantioselectivity and complete diastereoselectivity.

Synthesis of key fragments of leiodelide A.

The synthesis of all key fragments of the marine macrolide leiodelide A is described. The polyoxygenated northern subunit is derived from d-xylose, while the southern subunit is rapidly assembled via an aldol reaction and Horner-Wadsworth-Emmons olefination. This highly convergent approach will allow for rapid modification and assembly of several isomers of leiodelide A, which may be necessary considering the assignment of leiodelide B has been previously shown to be incorrect.

Transition metal catalyzed synthesis of aryl sulfides.

The presence of aryl sulfides in biologically active compounds has resulted in the development of new methods to form carbon-sulfur bonds. The synthesis of aryl sulfides via metal catalysis has significantly increased in recent years. Historically, thiolates and sulfides have been thought to plague catalyst activity in the presence of transition metals. Indeed, strong coordination of thiolates and thioethers to transition metals can often hinder catalytic activity; however, various catalysts are able to withstand catalyst deactivation and form aryl carbon-sulfur bonds in high-yielding transformations. This review discusses the metal-catalyzed arylation of thiols and the use of disulfides as metal-thiolate precursors for the formation of C-S bonds.

Calcium-promoted Pictet-Spengler reactions of ketones and aldehydes.

Calcium bis-1,1,1,3,3,3-hexafluoroisopropoxide is shown to be an effective catalyst for Pictet-Spengler reactions of 3-hydroxyphenethylamine and 3-hydroxy-4-methoxyphenethylamine with various aldehydes and ketones. Previous Lewis acid catalyzed Pictet-Spengler reactions of unactivated ketones typically require two separate reactions (imine formation, cyclization) to obtain the same results. The reactions described within directly provide 1,1'-disubstituted tetrahydroisoquinolines from the corresponding amine and ketone. These rare examples of Pictet-Spengler reactions of unactivated ketones demonstrate the unique nature of calcium as a Lewis acid catalyst.

Synthesis of N-arylindazoles and benzimidazoles from a common intermediate.

A variety of N-aryl-1H-indazoles and benzimidazoles were synthesized from common arylamino oximes in good to excellent yields. The product selectivity depends upon the base used in the reaction, as triethylamine promoted the formation of benzimidazoles, whereas 2-aminopyridine promoted the formation of N-arylindazoles. This method is valuable to the synthetic community because both indazoles and benzimidazoles are prevalent in pharmaceuticals.

Allylic oxidations of terminal olefins using a palladium thioether catalyst.

A palladium catalyst that converts terminal olefins to linear allylic acetates at lower catalyst loadings and faster reaction times than current systems is reported. This reaction can be conducted using benzoquinone as the oxidizing agent or catalytic amounts of copper and hydroquinone under one atmosphere of oxygen. Preliminary reactivity studies of pi-allylpalladium complexes under our reaction conditions do not provide results similar to those obtained in the catalytic reaction, which may suggest an alternative reaction pathway. The palladium catalyst is ligated by an aryloxyalkyl aryl sulfide, which is identified as a new ligand for homogeneous catalysis.

Zinc-mediated palladium-catalyzed formation of carbon-sulfur bonds.

A catalytic amount of zinc chloride in combination with a palladium catalyst ligated by a monodentate phosphine allows the coupling of aryl and alkyl thiols with aryl bromides in high yields. The addition of zinc chloride to a palladium catalyst system that reportedly failed to promote sulfide formation allows this once ineffective catalyst system to provide the sulfide product in good yield. This paper describes a high-yielding and general monodentate phosphine-ligated palladium catalyst for biaryl and alkyl aryl sulfide formation.

Nickel-catalyzed synthesis of oxazoles via C-S activation.

The synthesis of 2-substituted oxazoles is achieved via nickel-catalyzed cross-coupling reaction of 2-methylthio-oxazole and various organozinc reagents. An extension of this method is demonstrated with a chemoselective, one-pot synthesis of unsymmetrical 2,5-disubstituted oxazoles. This synthesis of 2- and 2,5-substituted oxazoles using this method provides great advantages over previous methods for these compounds and is highly complementary to current cyclodehydration strategies.

Calcium-catalyzed Pictet-Spengler reactions.

Pictet-Spengler reactions of m-tyramine and aldehydes produced tetrahydroisoquinolines in the presence of a catalytic amount of Ca[OCH(CF3)2]2. This reaction occurs with a variety of aryl, heteroaryl, and alkyl aldehydes, producing tetrahydroisoquinolines in high yield and with high regioselectivity. This calcium-promoted Pictet-Spengler reaction provides a mild alternative to the traditional Brønsted acids typically employed in these reactions.

A practical, metal-free synthesis of 1H-indazoles.

The synthesis of 1H-indazoles is achieved from o-aminobenzoximes by the selective activation of the oxime in the presence of the amino group. The reaction occurs with a variety of substituted o-aminobenzoximes using a slight excess of methanesulfonyl chloride and triethylamine at 0-23 degrees C and is amenable to scale-up. The synthesis of 1H-indazoles under these conditions is extremely mild compared with previous synthetic approaches and affords the desired compounds in good to excellent yields.

Palladium-catalyzed asymmetric [3 + 2] trimethylenemethane cycloaddition reactions.

Transition-metal-catalyzed trimethylenemethane (TMM) [3 + 2] cycloadditions provide direct routes to functionalized cyclopentanes. This reaction has been shown to be a highly chemo-, regio-, and diastereoselective process. We report a palladium-catalyzed asymmetric [3 + 2] trimethylenemethane (TMM) cycloaddition between 3-acetoxy-2-trimethylsilylmethyl-1-propene and various di- and trisubstituted olefins. Yields of exo-methylenecyclopentane products range from 59 to 99%, and enantiomeric excesses range from 58 to 92% ee.

Synthesis, structure, theoretical studies, and Ligand exchange reactions of monomeric, T-shaped arylpalladium(II) halide complexes with an additional, weak agostic interaction.

A series of monomeric arylpalladium(II) complexes LPd(Ph)X (L = 1-AdPtBu2, PtBu3, or Ph5FcPtBu2 (Q-phos); X = Br, I, OTf) containing a single phosphine ligand have been prepared. Oxidative addition of aryl bromide or aryl iodide to bis-ligated palladium(0) complexes of bulky, trialkylphosphines or to Pd(dba)2 (dba = dibenzylidene acetone) in the presence of 1 equiv of phosphine produced the corresponding arylpalladium(II) complexes in good yields. In contrast, oxidative addition of phenyl chloride to the bis-ligated palladium(0) complexes did not produce arylpalladium(II) complexes. The oxidative addition of phenyl triflate to PdL2 (L = 1-AdPtBu2, PtBu3, or Q-phos) also did not form arylpalladium(II) complexes. The reaction of silver triflate with (1-AdPtBu2)Pd(Ph)Br furnished the corresponding arylpalladium(II) triflate in good yield. The oxidative addition of phenyl bromide and iodide to Pd(Q-phos)2 was faster than oxidative addition to Pd(1-AdPtBu2)2 or Pd(PtBu3)2. Several of the arylpalladium complexes were characterized by X-ray diffraction. All of the arylpalladium(II) complexes are T-shaped monomers. The phenyl ligand, which has the largest trans influence, is located trans to the open coordination site. The complexes appear to be stabilized by a weak agostic interaction of the metal with a ligand C-H bond positioned at the fourth-coordination site of the palladium center. The strength of the Pd.H bond, as assessed by tools of density functional theory, depended upon the donating properties of the ancillary ligands on palladium.