Direct Patterning of Optoelectronic Nanostructures Using Encapsulated Layered Transition Metal Dichalcogenides.

Direct top-down nanopatterning of semiconductors is a powerful tool for engineering properties of optoelectronic devices. Translating this approach to two-dimensional semiconductors such as monolayer transition metal dichalcogenides (TMDs) is challenging because of both the small scales required for confinement and the degradation of electronic and optical properties caused by high-energy and high-dose electron radiation used for high-resolution top-down direct electron beam patterning. We show that encapsulating a TMD monolayer with hexagonal boron nitride preserves the narrow exciton linewidths and emission intensity typical in such heterostructures after electron beam lithography, allowing direct patterning of functional optical monolayer nanostructures on scales of a few tens of nanometers. We leverage this fabrication method to study size-dependent effects on nanodot arrays of MoS2 and MoSe2 as well as laterally confined electrical transport devices, demonstrating the potential of top-down lithography for nanoscale TMD optoelectronics.

Mechanistic Investigation of Molybdenum Disulfide Defect Photoluminescence Quenching by Adsorbed Metallophthalocyanines.

Lattice defects play an important role in determining the optical and electrical properties of monolayer semiconductors such as MoS2. Although the structures of various defects in monolayer MoS2 are well studied, little is known about the nature of the fluorescent defect species and their interaction with molecular adsorbates. In this study, the quenching of the low-temperature defect photoluminescence (PL) in MoS2 is investigated following the deposition of metallophthalocyanines (MPcs). The quenching is found to significantly depend on the identity of the phthalocyanine metal, with the quenching efficiency decreasing in the order CoPc > CuPc > ZnPc, and almost no quenching by metal-free H2Pc is observed. Time-correlated single photon counting (TCSPC) measurements corroborate the observed trend, indicating a decrease in the defect PL lifetime upon MPc adsorption, and the gate voltage-dependent PL reveals the suppression of the defect emission even at large Fermi level shifts. Density functional theory modeling argues that the MPc complexes stabilize dark negatively charged defects over luminescent neutral defects through an electrostatic local gating effect. These results demonstrate the control of defect-based excited-state decay pathways via molecular electronic structure tuning, which has broad implications for the design of mixed-dimensional optoelectronic devices.

Spatial Mapping of Electrostatic Fields in 2D Heterostructures.

In situ electron microscopy is an effective tool for understanding the mechanisms driving novel phenomena in 2D structures. However, due to practical challenges, it is difficult to address these technologically relevant 2D heterostructures with electron microscopy. Here, we use the differential phase contrast (DPC) imaging technique to build a methodology for probing local electrostatic fields during electrical operation with nanoscale spatial resolution in such materials. We find that, by combining a traditional DPC setup with a high-pass filter, we can largely eliminate electric fluctuations emanating from short-range atomic potentials. Using a method based on this filtering algorithm, a priori electric field expectations can be directly compared with experimentally derived values to readily identify inhomogeneities and potentially problematic regions. We use this platform to analyze the electric field and charge density distribution across layers of hBN and MoS2.

Ambient-Stable Two-Dimensional CrI3 via Organic-Inorganic Encapsulation.

Two-dimensional transitional metal halides have recently attracted significant attention due to their thickness-dependent and electrostatically tunable magnetic properties. However, this class of materials is highly reactive chemically, which leads to irreversible degradation and catastrophic dissolution within seconds in ambient conditions, severely limiting subsequent characterization, processing, and applications. Here, we impart long-term ambient stability to the prototypical transition metal halide CrI3 by assembling a noncovalent organic buffer layer, perylenetetracarboxylic dianhydride (PTCDA), which templates subsequent atomic layer deposition (ALD) of alumina. X-ray photoelectron spectroscopy demonstrates the necessity of the noncovalent organic buffer layer since the CrI3 undergoes deleterious surface reactions with the ALD precursors in the absence of PTCDA. This organic-inorganic encapsulation scheme preserves the long-range magnetic ordering in CrI3 down to the monolayer limit as confirmed by magneto-optical Kerr effect measurements. Furthermore, we demonstrate field-effect transistors, photodetectors, and optothermal measurements of CrI3 thermal conductivity in ambient conditions.

Tailoring the Optical Response of Pentacene Thin Films via Templated Growth on Hexagonal Boron Nitride.

The optoelectronic properties of organic thin films are strongly dependent on their molecular orientation and packing, which in turn is sensitive to the underlying substrate. Hexagonal boron nitride (hBN) and other van der Waals (vdW) materials are known to template different organic thin film growth modalities from conventional inorganic substrates such as SiO2. Here, the morphology and temperature-dependent optical properties of pentacene films grown on hBN are reported. Pentacene deposited on hBN forms large-grain films with a molecular π-face-on orientation unlike the dendritic edge-on thin-film phase on SiO2. Pentacene/hBN films exhibit a 40 meV lower free exciton emission than pentacene/SiO2 and an unconventional emission energy temperature dependence. Time-resolved photoluminescence (PL) decay measurements show a long-lived signal in the π-face-on phase related to delayed emission from triplet-triplet fusion. This work demonstrates that growth on vdW materials provides a pathway for controlling optoelectronic functionality in molecular thin films.

Halide perovskite nanocrystal arrays: Multiplexed synthesis and size-dependent emission.

Halide perovskites have exceptional optoelectronic properties, but a poor understanding of the relationship between crystal dimensions, composition, and properties limits their use in integrated devices. We report a new multiplexed cantilever-free scanning probe method for synthesizing compositionally diverse and size-controlled halide perovskite nanocrystals spanning square centimeter areas. Single-particle photoluminescence studies reveal multiple independent emission modes due to defect-defined band edges with relative intensities that depend on crystal size at a fixed composition. Smaller particles, but ones with dimensions that exceed the quantum confinement regime, exhibit blue-shifted emission due to reabsorption of higher-energy modes. Six different halide perovskites have been synthesized, including a layered Ruddlesden-Popper phase, and the method has been used to prepare functional solar cells based on single nanocrystals. The ability to pattern arrays of multicolor light-emitting nanocrystals opens avenues toward the development of optoelectronic devices, including optical displays.

Direct Visualization of Electric-Field-Induced Structural Dynamics in Monolayer Transition Metal Dichalcogenides.

Layered transition metal dichalcogenides offer many attractive features for next-generation low-dimensional device geometries. Due to the practical and fabrication challenges related to in situ methods, the atomistic dynamics that give rise to realizable macroscopic device properties are often unclear. In this study, in situ transmission electron microscopy techniques are utilized in order to understand the structural dynamics at play, especially at interfaces and defects, in the prototypical film of monolayer MoS2 under electrical bias. Through our sample fabrication process, we clearly identify the presence of mass transport in the presence of a lateral electric field. In particular, we observe that the voids present at grain boundaries combine to induce structural deformation. The electric field mediates a net vacancy flux from the grain boundary interior to the exposed surface edge sites that leaves molybdenum clusters in its wake. Following the initial biasing cycles, however, the mass flow is largely diminished and the resultant structure remains stable over repeated biasing. We believe insights from this work can help explain observations of nonuniform heating and preferential oxidation at grain boundary sites in these materials.

Electronic Coupling in Metallophthalocyanine-Transition Metal Dichalcogenide Mixed-Dimensional Heterojunctions.

Mixed-dimensional heterojunctions, such as zero-dimensional (0D) organic molecules deposited on two-dimensional (2D) transition metal dichalcogenides (TMDCs), often exhibit interfacial effects that enhance the properties of the individual constituent layers. Here we report a systematic study of interfacial charge transfer in metallophthalocyanine (MPc) - MoS2 heterojunctions using optical absorption and Raman spectroscopy to elucidate M core (M = first row transition metal), MoS2 layer number, and excitation wavelength effects. Observed phenomena include the emergence of heterojunction-specific optical absorption transitions and strong Raman enhancement that depends on the M identity. In addition, the Raman enhancement is tunable by excitation laser wavelength and MoS2 layer number, ultimately reaching a maximum enhancement factor of 30x relative to SiO2 substrates. These experimental results, combined with density functional theory (DFT) calculations, indicate strong coupling between nonfrontier MPc orbitals and the MoS2 band structure as well as charge transfer across the heterojunction interface that varies as a function of the MPc electronic structure.

Electrical Control of Circular Photogalvanic Spin-Valley Photocurrent in a Monolayer Semiconductor.

In a monolayer transition metal dichalcogenide (TMDC) that lacks structural inversion symmetry, spin degeneracy is lifted by strong spin-orbit coupling, and a distinctive spin-valley locking allows for the creation of valley-locked spin-polarized carriers with a circularly polarized optical excitation. When excited carriers also have net in-plane momentum, spin-polarized photocurrents can be generated at ambient temperature without magnetic fields or materials. The behavior of these spin-polarized photocurrents in monolayer TMDC remains largely unexplored. In this work, we demonstrate the tuning of spin-valley photocurrent generated from the circularly polarized photogalvanic effect in monolayer MoS2, including magnitude and polarization degree, by purely electric means at room temperature. The magnitude of spin-polarized photocurrent can be modulated up to 45 times larger, and the polarization degree of the total photocurrent can be tuned significantly (here from 0.5 to 16.6%) by gate control. Combined with the atomic thickness and wafer-scale growth capabilities of monolayer TMDC, the efficient electrical tuning of spin-valley photocurrent suggests a pathway to achieve spin-logic processing by local gate architectures in monolayer opto-spintronic devices.

Intrinsic Transport in 2D Heterostructures Mediated through h-BN Tunneling Contacts.

Understanding the electronic transport of monolayer transition metal dichalcogenides (TMDs) and their heterostructures is complicated by the difficulty in achieving electrical contacts that do not perturb the material. Typically, metal deposition on monolayer TMDs leads to hybridization between the TMD and the metal, which produces Schottky barriers at the metal/semiconductor interface. In this work, we apply the recently reported hexagonal boron nitride (h-BN) tunnel contact scheme to probe the junction characteristics of a lateral TMD heterostructure grown via chemical vapor deposition. We first measure the electronic properties across the junction before elucidating optoelectronic generation mechanisms via scanning photocurrent microscopy. We find that the rectification ratio measured using the encapsulated, tunnel contact scheme is almost 2 orders of magnitude smaller than that observed via conventional metal contact geometry, which implies that the metal/semiconductor Schottky barriers play large roles in this aspect. Furthermore, we find that both the photovoltaic as well as hot carrier generation effects are dominant mechanisms driving photoresponse, depending on the external biasing conditions. This work is the first time that this encapsulation scheme has been applied to lateral heterostructures and serves as a reference for future electronic measurements on this material. It also simultaneously serves as a framework to more accurately assess the electronic transport characteristics of 2D heterostructures and better inform future device architectures.

Size-tunable Lateral Confinement in Monolayer Semiconductors.

Three-dimensional confinement allows semiconductor quantum dots to exhibit size-tunable electronic and optical properties that enable a wide range of opto-electronic applications from displays, solar cells and bio-medical imaging to single-electron devices. Additional modalities such as spin and valley properties in monolayer transition metal dichalcogenides provide further degrees of freedom requisite for information processing and spintronics. In nanostructures, however, spatial confinement can cause hybridization that inhibits the robustness of these emergent properties. Here, we show that laterally-confined excitons in monolayer MoS2 nanodots can be created through top-down nanopatterning with controlled size tunability. Unlike chemically-exfoliated monolayer nanoparticles, the lithographically patterned monolayer semiconductor nanodots down to a radius of 15 nm exhibit the same valley polarization as in a continuous monolayer sheet. The inherited bulk spin and valley properties, the size dependence of excitonic energies, and the ability to fabricate MoS2 nanostructures using semiconductor-compatible processing suggest that monolayer semiconductor nanodots have potential to be multimodal building blocks of integrated optoelectronics and spintronics systems.