ICH Q14-inspired novel approach to establish an SFC-based purity method for carbamazepine.

The proposed ICH Q14 guideline "Analytical procedure development" describes science and risk-based approaches for development and maintenance of analytical procedures suitable for the assessment of the quality of drug substances and drug products. As a case study, the systematic development and validation of a supercritical fluid chromatography (SFC)-based purity method for carbamazepine is presented. Systematic analytical quality by design (AQbD) principles were applied using the software package Fusion QbD to the method development approach. The relationship between chromatographic parameters and the responses of interest were examined to improve the reliability of the method by understanding, reducing, and controlling sources of variability. Method performance qualification in terms of method robustness was finally carried out with the parameters that were classified as critical after method development and a validation study met previously set acceptance criteria. The developed SFC purity method for carbamazepine demonstrated readiness as a viable alternative to the official HPLC method published in the Ph.Eur. with improved peak resolution, improved peak symmetry, and faster analysis times (3 min vs. 80 min for the official method). Its inherent reliability illustrates the superiority of AQbD in method development and application for drug quality assurance.

Distinction of clenbuterol intake from drug or contaminated food of animal origin in a controlled administration trial - the potential of enantiomeric separation for doping control analysis.

The differentiation of clenbuterol abuse and unintentional ingestion from contaminated meat is crucial with respect to the valuation of an adverse analytical finding in human sports doping control. The proportion of the two enantiomers of clenbuterol may serve as potential discriminating parameter. For the determination of the individual enantiomers, specific methods were developed and validated for the different matrices under investigation based on chiral chromatography coupled to tandem mass spectrometry. Data are presented from the administration to humans of clenbuterol from a pharmaceutical preparation, and from cattle meat and liver containing residues. A shift in the proportion of the enantiomers in cattle meat is detected and this signature is also found in human urine after ingestion. Thus, an altered enantiomeric composition of clenbuterol may be used to substantiate athletes' claims following adverse analytical findings in doping control. However, in meat, the enantiomeric composition was found to be highly variable. Species as well as tissue dependent variances need to be considered in interpreting enantiomer discrimination. Analysis of post administration urines from a controlled experiment comparing the administration of racemic clenbuterol from a registered pharmaceutical preparation and the administration of residue-containing meat and liver (nonracemic mixture) from treated animals is reported. Furthermore doping control samples from Mexican U17 World Championship 2011 of the Fédération Internationale de Football Association (FIFA), with adverse analytical findings for clenbuterol, were re-analysed.

SFC-MS/MS as an orthogonal technique for improved screening of polar analytes in anti-doping control.

HPLC is considered the method of choice for the separation of various classes of drugs. However, some analytes are still challenging as HPLC shows limited resolution capabilities for highly polar analytes as they interact insufficiently on conventional reversed-phase (RP) columns. Especially in combination with mass spectrometric detection, limitations apply for alterations of stationary phases. Some highly polar sympathomimetic drugs and their metabolites showed almost no retention on different RP columns. Their retention remains poor even on phenylhexyl phases that show different selectivity due to π-π interactions. Supercritical fluid chromatography (SFC) as an orthogonal separation technique to HPLC may help to overcome these issues. Selected polar drugs and metabolites were analyzed utilizing SFC separation. All compounds showed sharp peaks and good retention even for the very polar analytes, such as sulfoconjugates. Retention times and elution orders in SFC are different to both RP and HILIC separations as a result of the orthogonality. Short cycle times could be realized. As temperature and pressure strongly influence the polarity of supercritical fluids, precise regulation of temperature and backpressure is required for the stability of the retention times. As CO2 is the main constituent of the mobile phase in SFC, solvent consumption and solvent waste are considerably reduced. Graphical Abstract SFC-MS/MS vs. LC-MS/MS.

In silico robustness testing of a compendial HPLC purity method by using of a multidimensional design space build by chromatography modeling-Case study pramipexole.

Purity testing of the active pharmaceutical ingredient (API) pramipexole is performed using an official (compendial) and harmonized method published in the European Pharmacopeia (E.P.) and United States Pharmacopeia (USP). According to this monograph the successful chromatographic separation of the API from impurities is achieved on a C18 column with gradient elution of an ion pairing buffer of pH 3.0 (mobile phase A) and acetonitrile (mobile phase B). Although not recommended in general, compendial methods are often adapted for purity testing of generic formulations. In this paper a novel approach to evaluate method robustness of an adapted method - prior of full method validation - is described. Based on Quality-by-Design (QbD) principles, a small number of experiments are performed, which after entering them into a chromatography modeling software allow to visualize a multidimensional "Design Space", a region, in which changes in method parameters will not significantly affect the results as defined in the ICH guideline Q8(R2) leading to a more flexible method handling in routine analysis. For two different recommended C18 columns a multidimensional Design Space (Method Operating Design Region, MODR) was constructed to study the robustness of the adapted method with a newly developed Robustness Module. In a full factorial design the following six parameters were varied at three levels (low, nominal, high): gradient time, temperature, pH of the aqueous eluent (A), flow rate, start- and end concentration of the organic mobile phase component (eluent B). The resulting 3(6)=729 experiments were performed in silico from the previously constructed models for Design Space in less than 1min and showed that the required resolution of 2.0 could not be reached in all experiments for the two columns which were recommended by the E.P. (failure rate 25% and 16%, respectively). However, by adjusting the gradient time, we were able to fulfill the requirements with a failure rate of zero. For the aqueous eluent a separate "Eluent Design Space" study was performed, which allows the construction of ionic strength vs. ion pairing concentration models to identify the optimum combination of the concentrations for the buffer and the ion-pairing reagent.