ABSTRACT
We propose a polarization sensitive terahertz time-domain spectrometer that can record orthogonally polarized terahertz fields simultaneously, using fibre-coupled photoconductive antennas and a scheme that modulated the emitter's polarization. The s and p channels of the multi-pixel terahertz emitter were modulated at different frequencies, thereby allowing orthogonal waveforms to be demultiplexed from the recorded signal in post-processing. The performance of the multi-pixel emitter used in this multiplexing scheme was comparable to that of a commercial single-polarization H-dipole antenna. The approach allowed two orthogonally polarized terahertz pulses to be recorded with good signal to noise (>1000:1) within half a second. We verified the capability of the spectrometer by characterizing a birefringent crystal and by imaging a polarization-sensitive metamaterial. This work has significant potential to improve the speed of terahertz polarization sensitive applications, such as ellipsometry and imaging.
ABSTRACT
Potential applications of terahertz (THz) radiation are constantly being investigated for high-speed communication due to its large bandwidth. For example, frequency hopping communication technology would benefit from the large bandwidth. To attach the information to the carrier wave, THz modulators with deep and stable modulation at different frequencies are crucial, yet are still lacking. Here a THz modulator, designed by integrating a non-resonant field enhancement effect of periodic metal microslits to assist a Fabry-Perot resonance structure (MS-FP) is proposed and demonstrated. New equations are developed to describe the superior performance of the novel design. The >95% modulation depth is achieved by a SiO2/Si gated graphene device at 14 Fabry-Perot resonant frequencies across 1.4 THz bandwidth, outperforming the recently reported 75% modulation depth THz modulator with a similar Fabry-Perot structure.
ABSTRACT
Single pixel imaging (SPI) captures images without array detectors or raster scanning. When combined with compressive sensing techniques it enables novel solutions for high-speed optical imaging and spectroscopy. However, when it comes to the real-time capture and analysis of a fast event, the challenge is the inherent trade-off between frame rate and image resolution. Due to the lack of sufficient sparsity and the intrinsic iterative process, conventional compressed sensing techniques have limited improvement in capturing natural scenes and displaying the images in real time. In this work, we demonstrate a novel alternative compressive imaging approach employing an efficient and easy-implementation sampling scheme based on reordering the deterministic Hadamard basis through their total variation. By this means, the number of measurements and acquisition are reduced significantly without needing complex minimization algorithms. We can recover a 128 × 128 image with a sampling ratio of 5% at the signal peak signal-to-noise ratio (PSNR) of 23.8 dB, achieving super sub-Nyquist sampling SPI. Compared to other widely used sampling e.g. standard Hadamard protocols and Gaussian matrix methods, this approach results in a significant improvement both in the compression ratio and image reconstruction quality, enabling SPI for high frame rate imaging or video applications.
ABSTRACT
Terahertz (THz) radiation is poised to have an essential role in many imaging applications, from industrial inspections to medical diagnosis. However, commercialization is prevented by impractical and expensive THz instrumentation. Single-pixel cameras have emerged as alternatives to multi-pixel cameras due to reduced costs and superior durability. Here, by optimizing the modulation geometry and post-processing algorithms, we demonstrate the acquisition of a THz-video (32 × 32 pixels at 6 frames-per-second), shown in real-time, using a single-pixel fiber-coupled photoconductive THz detector. A laser diode with a digital micromirror device shining visible light onto silicon acts as the spatial THz modulator. We mathematically account for the temporal response of the system, reduce noise with a lock-in free carrier-wave modulation and realize quick, noise-robust image undersampling. Since our modifications do not impose intricate manufacturing, require long post-processing, nor sacrifice the time-resolving capabilities of THz-spectrometers, their greatest asset, this work has the potential to serve as a foundation for all future single-pixel THz imaging systems.
ABSTRACT
Terahertz (THz) imaging can see through otherwise opaque materials. However, because of the long wavelengths of THz radiation (λ = 400 µm at 0.75 THz), far-field THz imaging techniques suffer from low resolution compared to visible wavelengths. We demonstrate noninvasive, near-field THz imaging with subwavelength resolution. We project a time-varying, intense (>100 µJ/cm(2)) optical pattern onto a silicon wafer, which spatially modulates the transmission of synchronous pulse of THz radiation. An unknown object is placed on the hidden side of the silicon, and the far-field THz transmission corresponding to each mask is recorded by a single-element detector. Knowledge of the patterns and of the corresponding detector signal are combined to give an image of the object. Using this technique, we image a printed circuit board on the underside of a 115-µm-thick silicon wafer with ~100-µm (λ/4) resolution. With subwavelength resolution and the inherent sensitivity to local conductivity, it is possible to detect fissures in the circuitry wiring of a few micrometers in size. THz imaging systems of this type will have other uses too, where noninvasive measurement or imaging of concealed structures is necessary, such as in semiconductor manufacturing or in ex vivo bioimaging.
