ABSTRACT
Thermo-optical properties of several (Tb1-xYx)2O3 ceramic samples were investigated in this Letter. The linear absorption and thermal conductivity coefficients, as well as the power dependence of thermally induced phase and polarization distortions of laser radiation, were measured. In addition, the effective thermo-optical constants Peff and Qeff were estimated. Thermo-optical properties of the studied ceramics were compared with those of the widely used terbium gallium garnet. It was shown that the material under consideration is highly promising for Faraday isolators operating at high average power laser radiation.
ABSTRACT
A cycle of works on manufacturing and studying laser and magnetooptical ceramics with a focus on their thermo-optical characteristics performed by the research team is analyzed. Original results that have not been published before such as measurements of the Verdet constant in the Zr:TAG, Re:MgAl2O4, and ZnAl2O4 ceramics are also presented.
ABSTRACT
We have created the first high-power Faraday isolator on an anisotropic magneto-optical element (MOE). The isolator is based on one MOE of a uniaxial CeF3 crystal and ensures an isolation degree of 30 dB at a high average laser radiation power of 700 W. The limitations due to the anisotropic nature of the crystal do not impose significantly more stringent requirements, either for the beam or the MOE.
ABSTRACT
The thermally induced depolarization and Verdet constant of CeF3 crystals-their most important characteristics-have been studied in the 79-293 K temperature range. It has been found that thermal effects reduce substantially upon cooling down to 79 K and the Verdet constant grows in inverse proportion to the temperature. It was shown that CeF3 crystals are not inferior to TGG as a medium for Faraday isolators, including cryogenic ones.
ABSTRACT
The thermal and electro-optical effects in Pockels cells with deuterated potassium dihydrogen phosphate (DKDP) crystals in the 215-300 K temperature range were investigated. Half-wave voltage decreases linearly with cooling, thereby it reduces seven times (up to 1 kW) with cooling to 215 K. The optical power of the thermally induced lens falls twice on cooling to 215 K from 300 K; thermally induced depolarization is almost independent of temperature and determined by input radiation power. A significant reduction of the thermally induced depolarization in a DKDP crystal with the axis inclined to the polarization plane of the beam was demonstrated numerically and experimentally. Thus, the DKDP crystals cooled to 215 K allow the creation of a low-voltage Pockels cell working with a high average and peak laser power.
ABSTRACT
A Faraday isolator (FI) for high-power lasers with kilowatt-level average power and 1-µm wavelength was demonstrated using a terbium scandium aluminum garnet (TSAG) with its crystal axis aligned in the <001> direction. Furthermore, no compensation scheme for thermally induced depolarization in a magnetic field was used. An isolation ratio of 35.4 dB (depolarization ratio γ of 2.9 × 10-4) was experimentally observed at a maximum laser power of 1470 W. This result for room-temperature FIs is the best reported, and provides a simple, practical solution for achieving optical isolation in high-power laser systems.
ABSTRACT
The Verdet constant and thermo-optical characteristics of a Si-doped and Ti-doped terbium aluminum garnet ceramics have been investigated. It is shown that the Verdet constant of the samples is â¼40% higher than that of TGG ceramics at 1064 nm. The best samples of Si:TAG have magneto-optical figures of merit more than 1.5 times greater than those of TGG ceramics. Si:TAG is better than TGG ceramics as a medium for high-power Faraday isolators.
ABSTRACT
A Faraday isolator (FI) based on a new magneto-optical medium-Ce:TAG ceramics-has been fabricated and studied in experiments. Compensation of thermally induced depolarization in the FI increases the isolation ratio from 31 to 39 dB at the laser power of 300 W. Estimates predict stable operation of the device with kilowatt laser power.
ABSTRACT
The Faraday isolator based on a new magneto-optical medium--TAG (terbium aluminum garnet) ceramics was implemented and investigated experimentally. The magneto-optical element was temperature-stabilized using water cooling. The device provides a stable isolation ratio of 38 dB at 300 W laser power. Estimates show high performance of the device at a kilowatt laser power.
ABSTRACT
The influence of paramagnetic magnetization of magneto-optical elements on the characteristics of Faraday isolators is studied. The theoretical estimates confirmed by the experiment indicate that this effect should be taken into consideration, particularly when designing large-aperture and cryogenic Faraday isolators.