Hydrophobized MFC as Reinforcing Additive in Industrial Silica/SBR Tire Tread Compound.

Silica is used as reinforcing filler in the tire industry. Owing to the intensive process of silica production and its high density, substitution with lightweight bio-based micro fibrillated cellulose (MFC) is expected to provide lightweight, sustainable, and highly reinforced tire composite. MFC was modified with oleoyl chloride, and the degree of substitution (DS) was maintained between 0.2 and 0.9. Subsequently, the morphology and crystallinity of the modified MFC were studied and found to be significantly dependent on the DS. The advantages associated with the use of the modified MFC in synergy with silica for the reinforcement of styrene butadiene rubber (SBR) nanocomposite was investigated in comparison with silica/SBR compound. The structural changes occasioned by the DS values influenced the processability, curing kinetics, modulus-rolling resistance tradeoff, and tensile properties of the resultant rubber compounds. We found that the compound made with modified MFC at a DS of 0.67 (MFC16) resulted to the highest reinforcement, with a 350% increase in storage modulus, 180% increase in Young`s modulus, and 15% increase in tensile strength compared to the referenced silica-filled compounds. Our studies show that MFC in combination with silica can be used to reinforce SBR compound for tire tread applications.

Dual-Silane Premodified Silica Nanoparticles-Synthesis and Interplay between Chemical, Mechanical, and Curing Properties of Silica-Rubber Nanocomposites: Application to Tire Tread Compounds.

In silica-rubber based nanocomposites, a single organo-silicon is often used to compatibilize and covalently link silica to rubber. In this work, we have investigated the impact, at micro- and macroscales, of the decoupling of the hydrophobization and the coupling activity of silane by pretreating silica with two different silane chemistries. The first one, a mercaptosilane, is the coupling agent that promotes a covalent link between silica and rubber during the sulfur-mediated vulcanization reaction. The second one, an alkylsilane, aims to improve the silica dispersion. For both kind of silanes, we have varied the chain length and studied at macroscale the dynamic mechanical properties through the key indicators that are E'' as loss modulus, E' as storage modulus, and their respective ratio tan δ. The shorter silanes combination yielded an improvement in terms of wet grip indicators with tan δ at 0 °C increasing from 0.205 to 0.237 while maintaining rolling resistance indicators at the same level. We have evaluated the impact of the silane chemistry onto the cross-linking reactivity within the fabricated rubber-based nanocomposites by using moving-dye rheometer measurements (MDR). By purposely using atomic force microscopy (AFM), we have studied the silica dispersion in the matrix and the rubber/silica interface and provided the rationale explanation of the mechanical properties observed at the macroscale. AFM observation pointed out the existence of a soft interface around silica fillers when long alkylsilanes were used. We infer that this interface impacts the polymer-filler dynamic and subsequently affects the mechanical properties of the composite material.

Hybrid Silica-Based Fillers in Nanocomposites: Influence of Isotropic/Isotropic and Isotropic/Anisotropic Fillers on Mechanical Properties of Styrene-Butadiene (SBR)-Based Rubber.

The improvement of mechanical properties of polymer-based nanocomposites is usually obtained through a strong polymer-silica interaction. Most often, precipitated silica nanoparticles are used as filler. In this work, we study the synergetic effect occurring between dual silica-based fillers in a styrene-butadiene rubber (SBR)/polybutadiene (PBD) rubber matrix. Precipitated Highly Dispersed Silica (HDS) nanoparticles (10 nm) have been associated with spherical Stöber silica nanoparticles (250 nm) and anisotropic nano-Sepiolite. By imaging filler at nano scale through Scanning Transmission Electron Microscopy, we have shown that anisotropic fillers align only in presence of a critical amount of HDS. The dynamic mechanical analysis of rubber compounds confirms that this alignment leads to a stiffer nanocomposite when compared to Sepiolite alone. On the contrary, spherical 250 nm nanoparticles inhibit percolation network and reduce the nanocomposite stiffness.

Supramolecular Dimerization in a Polymer Melt from Small-Angle X-Ray Scattering and Rheology: A Miscible Model System.

We present a structural and dynamic study on the simplest supramolecular hetero-association, recently investigated by the authors to prepare architectural homogeneous structures in the melt state, based on the bio-inspired hydrogen-bonding of thymine/diaminotriazine (thy-DAT) base-pairs. In the combination with an amorphous low Tg poly(butylene oxide) (PBO), no micellar structures are formed, which is expected for nonpolar polymers because of noncompatibility with the highly polar supramolecular groups. Instead, a clear polymer-like transient architecture is retrieved. This makes the heterocomplementary thy-DAT association an ideal candidate for further exploitation of the hydrogen-bonding ability in the bulk for self-healing purposes, damage management in rubbers or even the development of easily processable branched polymers with built-in plasticizer. In the present work, we investigate the temperature range from Tg + 20 °C to Tg + 150 °C of an oligomeric PBO using small-angle X-ray scattering (SAXS) and linear rheology on the pure thy and pure DAT monofunctionals and on an equimolar mixture of thy/DAT oligomers. The linear rheology performed at low temperature is found to correspond to fully closed-state dimeric configurations. At intermediate temperatures, SAXS probes the equilibrium between open and closed states of the thy-DAT mixtures. The temperature-dependent association constant in the full range between open and closed H-bonds and an enhancement of the monomeric friction coefficient due to the groups is obtained. The thy-DAT association in the melt is more stable than the DAT-DAT, whereas the thy-thy association seems to involve additional long-lived interactions.

Decoupling the Contributions of ZnO and Silica in the Characterization of Industrially-Mixed Filled Rubbers by Combining Small Angle Neutron and X-Ray Scattering.

Scattering techniques with neutrons and X-rays are powerful methods for the investigation of the hierarchical structure of reinforcing fillers in rubber matrices. However, when using only X-ray scattering, the independent determination of the filler response itself sometimes remains an issue because of a strong parasitic contribution of the ZnO catalyst and activator in the vulcanization process. Microscopic characterization of filler-rubber mixtures even with only catalytic amounts of ZnO is, therefore, inevitably complex. Here, we present a study of silica aggregates dispersed in an SBR rubber in the presence of the catalyst and show that accurate partial structure factors of both components can be determined separately from the combination of the two scattering probes, neutrons, and X-rays. A unique separation of the silica filler scattering function devoid of parasitic catalyst scattering becomes possible. From the combined analysis, the catalyst contribution is determined as well and results to be prominent in the correction scheme. The experimental nano-structure of the ZnO after the mixing process as the by-product of the scattering decomposition was found also to be affected by the presence or absence of silica in the rubber mixture, correlated with the shear forces in the mixing and milling processes during sample preparation. The presented method is well suited for studies of novel dual filler systems.

Tough Supramolecular Hydrogel Based on Strong Hydrophobic Interactions in a Multiblock Segmented Copolymer.

We report the preparation and structural and mechanical characterization of a tough supramolecular hydrogel, based exclusively on hydrophobic association. The system consists of a multiblock, segmented copolymer of hydrophilic poly(ethylene glycol) (PEG) and hydrophobic dimer fatty acid (DFA) building blocks. A series of copolymers containing 2K, 4K, and 8K PEG were prepared. Upon swelling in water, a network is formed by self-assembly of hydrophobic DFA units in micellar domains, which act as stable physical cross-link points. The resulting hydrogels are noneroding and contain 75-92 wt % of water at swelling equilibrium. Small-angle neutron scattering (SANS) measurements showed that the aggregation number of micelles ranges from 2 × 102 to 6 × 102 DFA units, increasing with PEG molecular weight. Mechanical characterization indicated that the hydrogel containing PEG 2000 is mechanically very stable and tough, possessing a tensile toughness of 4.12 MJ/m3. The high toughness, processability, and ease of preparation make these hydrogels very attractive for applications where mechanical stability and load bearing features of soft materials are required.