ABSTRACT
Natural fibers do not have a long life in soil; therefore, they cannot replace synthetic textiles in many applications. However, in order to solve ever-increasing global environmental problems due to microplastics, more and more natural polymers must be used, creating a need for research into the sustainable life extension of natural fibers. Lignin is, along with cellulose, a main component of wood, and is produced in large quantities as waste during paper production. With appropriate processing, lignin can be exploited/used as a textile auxiliary to combine the strength-enhancing properties of textiles made from natural fibers with the protective properties of a lignin coating. However, there is not yet sufficient research on how to integrate lignin into textile applications. For this purpose, in this study, we have investigated whether thermoplastic lignin can be processed as a surface protective coating. We tested lignin as a yarn coating to extend the service life of cellulosic textiles. Cotton yarns have been coated with lignin in variations of coating mass, characterized and investigated by means of soil burial tests. As the soil burial tests conducted in climate chamber and outdoor field environments showed, the lifespan of textiles made from natural fibers can be significantly extended with a lignin coating. Long-term resilience has been demonstrated in standard burial tests. In the outdoor tests, the lignin coating was still fully intact, even after about 160 days of burial. The textile materials coated in this way enable sustainable applications, especially for geotextiles. They have an adjustable, sufficiently long service life; however, they are still biodegradable, and can therefore replace some applications, such as vegetating trench/brook slopes, with synthetic materials. Lignin-coated textiles have the potential to significantly reduce the carbon footprint, reduce not only the dependence on petroleum-based products but also the amount of microplastics entering the environment. Further research can be conducted to improve lignin compounding in terms of other interesting properties for specific textile applications. Process optimization could increase the protective effect and further extend the life of useful textiles in soil.
ABSTRACT
The potential of spider silk as an intriguing biological prototype for collecting water from a humid environment has attracted wide attention, and various materials with suitable structures have been engineered. Here, inspired by this phenomenon, a kind of superwetting poly(vinylidene fluoride) (PVDF) membrane with spindle-knotted structured fibers was prepared by the electrospinning method followed by oxygen plasma etching treatment. The prepared membrane presented a satisfactory separation efficiency for various oil-in-water emulsions. The cooperative effect of the special wettability property and the spindle-knot structure stimulated the emulsified oil droplets to accumulate quickly on the membrane surface. A model that explains the accumulation of emulsified oil droplets has also been developed. Furthermore, an artificial fiber comprising a micron-sized spindle-knot structure was prepared by the dip-coating method to clearly illustrate the aggregation process of the emulsified oil droplets and to verify the theoretical explanation. We hope that this study will provide new inspiration for oil/water emulsion separation techniques.
ABSTRACT
The present experimental work analyses the potential of lignin as a matrix for materials made from renewable resources for composite components and the production of hybrid semi-finished products by coating a flax fibre yarn. Natural fibres, due to their low density, in combination with lignin can be a new renewable source for lightweight products. For this purpose, the extrusion process was adapted to lignin as a matrix material for bio-based composites and coating of natural fibre yarns. A commercial flax yarn is the basis for the lignin coating by extrusion. Subsequently, the coated flax yarn was characterised with regard to selected yarn properties. In order to produce composite plates, the lignin-coated flax yarn was used as warp yarn in a bidirectional fabric due to its insufficient flexibility transversely to the yarn axis. The commercial flax yarn was used as weft yarn to increase the fibre volume content. The tensile and flexural properties of the bio-based composite material were determined. There was a significant difference in the mechanical properties between the warp and weft directions. The results show that lignin can be used as matrix material for bio-based natural fibre composites and the coating of natural fibre yarns is an alternative to spun hybrid yarns.
ABSTRACT
Inspired by the fog harvesting ability of the spider net and the interphase wetting surface of Namib desert beetles, we designed a kind of special bioinspired hybrid wetting surface on a Cu mesh by combining polydimethylsiloxane (PDMS) and graphene (G). A surface containing hydrophobic and superhydrophobic areas is prepared by a combination of laser etching and ultrasonic vibration. Thus, this as-prepared hybrid wetting surface can quickly drive tiny water droplets toward more wettable regions, which makes a great contribution to the improvement of collection efficiency. Moreover, the PDMS/G surface not only is tolerant to many stresses such as excellent anti-corrosion ability, anti-UV exposure and oil contamination, but also shows self-healing simply by burning the worn areas, which thus endows the surface with tunable-wettability change between flame treatment and abrasive wear. This study offers a novel insight into the design of burned healed materials with interphase wettability that may enhance the fog collection efficiency in engineering liquid harvesting equipment and realizes renewable materials in situ cheaply and rapidly by processes that can be easily scaled and automated.
ABSTRACT
We designed a type of smart bioinspired wettable surface with tip-shaped patterns by combining polydimethylsiloxane (PDMS) and graphene (PDMS/G). The laser etched porous graphene surface can produce an obvious wettability change between 200 °C and 0 °C due to a change in aperture size and chemical components. We demonstrate that the cooperation of the geometrical structure and the controllable wettability play an important role in water gathering, and surfaces with tip-shaped wettability patterns can quickly drive tiny water droplets toward more wettable regions, so making a great contribution to the improvement of water collection efficiency. In addition, due to the effective cooperation between super hydrophobic and hydrophilic regions of the special tip-shaped pattern, unidirectional water transport on the 200 °C heated PDMS/G surface can be realized. This study offers a novel insight into the design of temperature-tunable materials with interphase wettability that may enhance fog collection efficiency in engineering liquid harvesting equipment, and realize unidirectional liquid transport, which could potentially be applied to the realms of microfluidics, medical devices and condenser design.
ABSTRACT
We designed a kind of smart bioinspired fiber with multi-gradient and multi-scale spindle knots by combining polydimethylsiloxane (PDMS) and graphene oxide (GO). Multilayered graphene structures can produce obvious wettability change after laser etching due to increased roughness. We demonstrate that the cooperation between curvature and the controllable wettability play an important role in water gathering, which regulate effectively the motion of tiny water droplets. In addition, due to the effective cooperation of multi-gradient and multi-scale hydrophilic spindle knots, the length of the three-phase contact line (TCL) can be longer, which makes a great contribution to the improvement of collecting efficiency and water-hanging ability. This study offers a novel insight into the design of smart materials that may control the transport of tiny drops reversibly in directions, which could potentially be extended to the realms of in microfluidics, fog harvesting filtration and condensers designs, and further increase water collection efficiency and hanging ability.
ABSTRACT
Recently developing bioinspired super-hydrophobic surfaces to achieve self-cleaning properties has been driving numerous researches. However, hydrophilicity is one of the most important features of garment comfort. Therefore, accomplishing self-cleaning and stain repellency on hydrophilic surfaces would be a high topic of interest. This research is concerned with wettability mechanism; static and dynamic study of contact angle through water droplet absorption on the multiple scale nano-roughness covered by different weight ratio of oppositely charged inorganic nanoparticles and amino-functionalized polysiloxane. The results revealed that the second layer of the resin formed on the surface can show an amphiphilic hybrid block copolymer-like feature whose dual action can be intensified during water droplet absorption by the created multiple size nano-roughness. This unique structure can create a stain repellent but hydrophilic surface with exceptional advantages. The mechanism has been deeply discussed according to the evidence on droplet edge interfacial energy changes as a driving force to overcome meta-stable Cassie state on the multiple size nano-roughness with amphiphilic feature. A lotus-like nano-roughness has been also observed on the SEM micrographs. Based on a statistically approached experimental design, the effect of variant factors on droplet absorption time, static, advancing, receding contact angles and self-cleaning properties has been mathematically modeled according to the response surface methodology (RSM).
Subject(s)
Nanotechnology , Spectrum Analysis , Surface PropertiesABSTRACT
Separation of secondary emulsions of dispersed droplet size less than 10 µm, by means of fibrous medium is a very complex but important process. The study investigates the influence of thin fibrous filter properties, i.e. surface energy, pore size and porosity on the separation performance of an isooctane in water emulsion (0.2%, mean drop size 2 µm). Experiments were carried out on five different filter media with a wide variation in their pore size (2-51 µm), surface energy (14-46 mN/m) and porosity (0.46-0.87) at similar process conditions. Filter media with different wettability are obtained by applying various hydrophobic and hydrophilic coatings. All the used coatings contain nanoparticles (25 nm) to impart nanoscale surface roughness at the single fiber surface. Besides emulsion properties and operating conditions, the phase separation mechanism and performance highly depends on pore size, surface energy and porosity of the filter media. More complete coalescence takes place at reduced pore size and at a surface preferentially wetted by the dispersed phase. Whereas when the pore size equals to the influent droplet size, then the surface wettability of filter is less effective and the separation mechanism is governed by inflow velocity. The emulsion inflow velocity and pressure drop are significantly affected by the filter media air permeability but do not depend on filter surface energy.
Subject(s)
Emulsions/isolation & purification , Filtration/instrumentation , Oils/isolation & purification , Water/chemistry , Emulsions/chemistry , Filtration/standards , Hydrophobic and Hydrophilic Interactions , Nanoparticles , Octanes/chemistry , Octanes/isolation & purification , Oils/chemistry , Porosity , Surface PropertiesABSTRACT
Solar thermal collectors used at present consist of rigid and heavy materials, which are the reasons for their immobility. Based on the solar function of polar bear fur and skin, new collector systems are in development, which are flexible and mobile. The developed transparent heat insulation material consists of a spacer textile based on translucent polymer fibres coated with transparent silicone rubber. For incident light of the visible spectrum the system is translucent, but impermeable for ultraviolet radiation. Owing to its structure it shows a reduced heat loss by convection. Heat loss by the emission of long-wave radiation can be prevented by a suitable low-emission coating. Suitable treatment of the silicone surface protects it against soiling. In combination with further insulation materials and flow systems, complete flexible solar collector systems are in development.
Subject(s)
Bionics , Silicones/chemistry , Textiles , Animals , Biomimetics , Body Temperature Regulation , Equipment Design , Hair , Hot Temperature , Materials Testing , Optics and Photonics , Polymers , Solar Energy , Sunlight , UrsidaeABSTRACT
The significance of inspiration from nature for technical textiles and for fibrous composite materials is demonstrated by examples of already existing technical solutions that either parallel biology or are indeed inspired by biological models. The two different basic types of biomimetic approaches are briefly presented and discussed for the "technical plant stem." The technical plant stem is a biomimetic product inspired by a variety of structural and functional properties found in different plants. The most important botanical templates are the stems of the giant reed (Arundo donax, Poaceae) and of the Dutch rush (Equisetum hyemale, Equisetaceae). After analysis of the structural and mechanical properties of these plants, the physical principles have been deduced and abstracted and finally transferred to technical applications. Modern computer-controlled fabrication methods for producing technical textiles and for structuring the embedding matrix of compound materials render unique possibilities for transferring the complex structures found in plants, which often are optimized on several hierarchical levels, into technical applications. This process is detailed for the technical plant stem, a biomimetic, lightweight, fibrous composite material based on technical textiles with optimized mechanical properties and a gradient structure.