Shaping ability of single-file reciprocating and heat-treated multifile rotary systems: a micro-CT study.

AIM: To investigate changes in three-dimensional geometry, in various cross-sectional morphological parameters and in the centring ability of root canals prepared with different preparation systems using microcomputed tomographic imaging technology. METHODOLOGY: Sixty-four mesial canals of mandibular molars were matched based on similar morphological dimensions using micro-CT evaluation and assigned to four experimental groups (n = 16), according to the canal preparation technique: Reciproc, WaveOne, Twisted File and HyFlex CM systems. Changes in several 2D (area, perimeter, form factor, roundness, minor and major diameter) and 3D [volume, surface area, structure model index (SMI)] morphological parameters, as well as canal transportation, were compared with preoperative values using Kruskal-Wallis and anovapost hoc Tukey's tests with the significance level set at 5%. RESULTS: Preparation significantly increased all tested parameters in the experimental groups. No significant differences were observed between groups regarding changes in volume, surface area, SMI, form factor and roundness of the root canal after preparation (P > 0.05). In the apical third, the Reciproc group had significantly greater changes in canal area, perimeter, major and minor diameters than the other groups (P < 0.05). Overall, the Twisted File and HyFlex CM systems were associated with significantly less transportation than the reciprocating instruments, Reciproc and WaveOne (P < 0.05). CONCLUSIONS: Shaping procedures led to the enlargement of the root canal space with no evidence of significant preparation errors. Changes in 3D parameters were not different between groups whilst, in the apical third, Reciproc was associated with significantly greater changes in several 2D parameters compared to the other groups. Twisted File and HyFlex CM systems were able to maintain the original canal anatomy with less canal transportation than Reciproc and WaveOne; however, these differences are unlikely to be of clinical significance.

Rubber dam application in endodontic practice: an update on critical educational and ethical dilemmas.

Proper isolation is an essential prerequisite for successful endodontic treatment. This article aims to provide an update on the prevalence of rubber dam (RD) use, and the role of education along with attitudes of general dental practitioners (GDPs) and patients towards the application of RD in endodontics. Critical ethical issues are also highlighted. Using certain keywords, an electronic search was conducted spanning the period from January 1983 to April 2013 to identify the available related investigations, and the pooled data were then analysed. The results show that although RD is the Standard of Care in endodontic practice, there is a clear discrepancy in what GDPs are taught in dental school and what they practice after graduation. There is little scientific evidence to support the application of RD; however, patient safety and clinical practice guidelines indicate that it is unnecessary and unethical to consider a cohort study to prove what is already universally agreed upon. A few clinical situations may require special management which should be highlighted in the current guidelines. This would pave the way for clear and straightforward universal guidelines.

Interaction between chlorhexidine-impregnated gutta-percha points and several chlorine-containing endodontic irrigating solutions.

AIM: To evaluate if the immersion of chlorhexidine-impregnated gutta-percha points in chlorine-containing endodontic irrigants causes colour changes and precipitate formation. METHODOLOGY: Eighty-one size 25 chlorhexidine medicated (Activ Points, Roeko, Langenau, Germany) and 27 size 25 standard gutta-percha points (Roeko) were immersed in microtubes, containing the following solutions: 0.5 and 5.25% NaOCl or Aquatine (Optident, Ilkley, UK). The samples were visually assessed, by two independent observers, at regular intervals over 3 weeks, to detect colour changes and precipitate formation. A score system was used to grade the precipitate intensity. To compare the number of days required for a precipitate to form mean and standard differences were calculated; the means between the groups were compared using a one-way analysis of variance test. Mean intensity scores were calculated and compared between groups using Kruskal-Wallis procedure followed by the Mann-Whitney test. RESULTS: The groups containing 5.25% NaOCl started to produce a visible precipitate after fourteen days (16.48 ± 0.98) for the Activ points; this process was first noticed with the standard gutta-percha group on day 17 (18.33 ± 1.22 days), with a statistically significant difference (P = 0.002). When looking at the intensity scores from day 17 onwards, these two groups differed statistically, with a greater amount for the AP group (P < 0.001). No other test group presented with changes. CONCLUSION: The placement of impregnated gutta-percha points, in 5.25% NaOCl for a 2-week period, caused the formation of a precipitate in the experimental conditions of this study.

The effect of surface tension reduction on the clinical performance of sodium hypochlorite in endodontics.

Sodium hypochlorite (NaOCl) is recommended as an endodontic irrigant in view of its broad antimicrobial and tissue dissolution capacities. To enhance its penetration into inaccessible areas of root canals and to improve its overall effect, the addition of surface-active agents has been suggested. The aim of this investigation was to review the effect of the reduction of the surface tension on the performance of NaOCl in endodontics. A search was performed in the Medline electronic database (articles published up to 28 July 2012, in English) with the search terms and combinations as follows: 'sodium hypochlorite AND surface tension or interfacial force or interfacial tension or surface-active agent or amphiphilic agent or surface active agent or surfactant or tenside or detergent'. The purpose of this search was to identify publications that compared NaOCl alone and NaOCl modified with the addition of a surface-active agent in endodontics. A hand search of articles published online ('in-press' and 'early view'), and appearing in the reference list of the articles included, was further performed, using the same search criteria as the electronic search. The search identified 302 publications, of which 11 fulfilled the inclusion/exclusion criteria of the review. The evidence available suggests that surface-active agents improve the penetration of NaOCl in the main canal and have no effect on its pulp tissue dissolution ability. There are, however, insufficient data to enable a sound conclusion to be drawn regarding the effect of modifying NaOCl's surface tension on lubrication, antimicrobial and smear layer or debris removal abilities.

Push-out strength of translucent fibre posts cemented using a dual-curing technique or a light-curing self-adhering material.

AIM: To compare by means of a push-out test the interfacial strength of a dual-curing resin cement and a light-curing self-adhering resin composite when used in translucent fibre post cementation. METHODOLOGY: Thirty-four extracted human premolars with single canals were selected and root filled. Translucent fibre posts (RelyX Fiber Post) were luted into the root canal using two resinous luting systems (n = 17). Dual-Curing Technique (DC): the specimens were treated with Excite DSC and RelyX ARC, which were light-cured simultaneously through the post for 60 s. Light-Curing Self-Adhering Technique (LCSA): the specimens were treated with Vertise Flow, which was light-cured through the post for 60 s. The specimens were sectioned transversally into six slices to perform the push-out test at the coronal, middle and apical regions of the root canals. Data were analysed by two-way anova. All specimens were analysed by stereomicroscopy and SEM to determine fracture patterns. RESULTS: There were no significant differences between the DC and LCSA techniques (P = 0.703) in any of the canal regions. Root region was not a significant factor for push-out values (P = 0.255) and group-region interactions were not significant (P = 0.740). For the DC technique, the majority of the fracture patterns (73.3%) were adhesive at the interface between dual-curing resin cement and adhesive. For the LCSA technique, the majority of the fracture patterns (71.7%) were adhesive at the interface between light-curing self-adhering resin composite and dentine. CONCLUSIONS: The interfacial strength between light-curing self-adhering resin composite and root canal walls is equivalent to the interfacial strength between dual-curing cement and root canal walls.

Influence of pH changes on chlorine-containing endodontic irrigating solutions.

Chlorine-containing solutions are used for broad disinfection purposes. Water disinfection literature suggests that their disinfectant action depends on pH values as this will influence the available free chlorine forms. Hypochlorous acid (HOCl) has been suggested to have an antimicrobial effect around 80-100 times stronger than the hypochlorite ion. The aim of this paper was to review the influence of pH changes on the efficacy of chlorine-containing endodontic irrigating solutions. An electronic and hand search (articles published through to 2010, including 'in press' articles; English language; search terms 'root canal irrigants AND sodium hypochlorite or hypochlorous acid or superoxidized water or electrochemically activated solution'; 'antimicrobial action AND sodium hypochlorite or hypochlorous acid or superoxidized water or electrochemically activated solution'; 'tissue dissolution AND sodium hypochlorite or hypochlorous acid or superoxidized water or electrochemically activated solution'; 'smear layer AND sodium hypochlorite or hypochlorous acid or superoxidized water or electrochemically activated solution') was performed to identify publications that compared chlorine water solutions with different pH. Of 1304 publications identified, 20 were considered for inclusion in the review. The search resulted in the retrieval of articles studying sodium hypochlorite (NaOCl), superoxidized waters (SOW) and sodium dichloroisocyanurate (NaDCC). Regarding antimicrobial efficacy, the literature suggested that reducing the pH value of NaOCl to between 6 and 7.5 would lead to improved action; SOW was described as having a lower antimicrobial effect. The tissue dissolution activity NaOCl decreased when the pH reached values between 6 and 7.5; NaDCC and SOW had no clinically relevant tissue dissolution capability. Chlorine solutions of different characteristics appeared to have some cleaning efficacy although they should to be used in conjunction with chelating and/or detergent agents.

Some factors influencing the stability of Sterilox(®), a super-oxidised water.

Super-oxidised waters, particularly Sterilox(®), have been suggested for the disinfection of dental unit water lines and dental impression materials owing to their antimicrobial efficacy. One of the previously suggested characteristics is their short shelf life. The purpose of this investigation was to understand the effect of storage conditions on Sterilox(®)'s stability. Eight bottles (four completely full, four half-full) of freshly prepared solution were divided into four groups and subsequently stored by being either exposed to or protected from sunlight. The chlorine concentration was monitored using chlorine test strips until the concentration reached zero, or until the thirteenth week. Statistically significant differences between the groups exposed to sunlight and the non-exposed groups (p <0.001) were found. The mean loss of chlorine per day for the non-exposed samples was 1.01 mg/L, whilst the mean for the exposed samples was 2.42 mg/L. The presence of air did not affect the chlorine decomposition in the bottles. The results of this investigation indicate that when the solution is exposed to sunlight, the decrease of chlorine starts at day 4, whilst for the groups sheltered from sunlight, the process started after day 14. Therefore, Sterilox(®) solutions appear to be more stable than previously surmised.