ABSTRACT
The motion of ferrofluidic marbles on flat polymer substrates is reported. Nanopowders of polyvinylidene fluoride and gammaFe2O3 were used for the preparation of ferrofluidic marbles. The marbles are activated easily with an external magnetic field. A microfluidic device based on ferrofluidic marbles (the ferrofluidic bearing) is described. Velocities of marbles as high as 25+/-3 cm/s were registered. The sliding of ferrofluidic drops on superhydrophobic surfaces was studied. It was demonstrated that the threshold magnetic force necessary for the drop displacement depends linearly on the drop radius, thus the motion of the drop is defined by the processes occurring in the vicinity of the triple line only.
Subject(s)
Iron/chemistry , Magnetics , Microfluidics , Surface PropertiesABSTRACT
Wetting transitions were studied with vertically-vibrated drops on various artificial and natural rough substrates. Alternative pathways of wetting transitions were observed. The model of wetting transition is presented. Multiple minima of the Gibbs free energy of a drop deposited on a rough surface explain alternative pathways of wetting transitions. We demonstrate that a wetting transition occurs when the constant force resulting from vibrations, Laplace and hydrostatic pressure acts on the triple line. It is shown that the final wetting states are mainly the Cassie impregnating wetting state with water penetrating the pores in the outer vicinity of the droplet or the Wenzel state with water inside the pores under the droplet whereas the substrate ahead the drop is dry.
Subject(s)
Models, Theoretical , Solutions/chemistry , Surface Properties , Water/chemistry , WettabilityABSTRACT
Water contact angles on polysulfone and polyethersulfone films exposed to UV irradiation have been found to decrease dramatically. We relate this phenomenon to the formation and release of disulfonic acid from the irradiated films, a well-known surfactant. The phenomenon appears to be reversible, namely, cleansed surfaces retained their initial contact angle. The revealed phenomenon may provide a means of controlling the spreading of liquids on polysulfone and polyethersulfone films and seems promising for use in microfluidics applications.
ABSTRACT
The wetting of rough honeycomb micrometrically scaled polymer substrates was studied. A very strong dependence of the apparent contact angle on the drop volume has been established experimentally. The environmental scanning electron microscopy study of the fine structure of the triple line is reported first. The triple line is not smooth and prefers grasping the polymer matrix over air holes. The precursor rim surrounding the drop has been observed. The revealed dependence of the apparent contact angle on the drop volume is explained by the transition between the pure Cassie and combined Wenzel-Cassie wetting regimes, which is induced by capillarity penetration of water into the holes of relief.
ABSTRACT
Wetting of pigeon feathers has been studied. It was demonstrated that the Cassie-Baxter wetting regime is inherent for pigeon pennae. The water drop, supported by network formed by barbs and barbules, sits partially on air pockets. Small static apparent angle hysteresis justifies the Cassie-Baxter wetting hypothesis. A twofold structure of a feather favors large contact angles and provides its water repellency. Cassie-Wenzel transition has been observed under drop evaporation, when drop radius becomes small enough for capillarity-induced water penetration into the protrusions, formed by barbules.
Subject(s)
Feathers , Animals , Capillary Action , Columbidae , Feathers/chemistry , Hydrophobic and Hydrophilic Interactions , Surface Properties , Water/chemistry , WettabilityABSTRACT
A superhydrophobic surface is produced from industrial grade polymer materials. The surface comprises partly disordered triple-scaled arrays of polyvinylidene fluoride (PVDF) globules. An inherently superhydrophobic metallic surface is produced with polymer template. The mathematical model based on the Cassie-Baxter hypothesis of air trapping under a water drop is built, which gives the apparent contact angle on the manifold-scaled interface. The presence of several scales itself is not a sufficient condition of hydrophobicity of inherently wettable surfaces. The geometrical features favoring the increase of the vapor-water interface fraction are necessary for this phenomenon.
ABSTRACT
Mesoscopically ordered patterns were obtained when polymer solutions were applied to tilted substrates and evaporated immediately under ambient conditions in a slow air current. The patterns were studied with optical, scanning electron, and atomic force microscopy. Shadowgraph visualization of the patterning was carried out, and visualization of the flow with an ink tracer was performed. Restrained and nonrestrained flows of the polymer solution gave rise to very similar patterning. The formation of the patterns on different solid substrates, including substrates wetted with silicon oil, was investigated. The concentration of the polymer solutions exerted an influence on the characteristic dimension of mesoscaled cells. A physical mechanism of the patterning is proposed. The mechanism is based on the mass transport instability occurring under the intensive evaporation of the solvent. The model satisfactorily explains the experimental findings.