Temporal effects of mechanical loading on deformation-induced damage in skeletal muscle tissue.

Mechanical loading of soft tissues covering bony prominences can cause skeletal muscle damage, ultimately resulting in a severe pressure ulcer termed deep tissue injury. Recently, by means of an experimental-numerical approach, it was shown that local tissue deformations cause tissue damage once a deformation threshold is exceeded. In the present study, the effects of load exposure time and intermittent load relief on the development of deformation-induced muscle damage were investigated. The data showed that a 2 h loading period caused more damage than 10 min loading. Intermittent load reliefs of 2 min during a 2 h loading period had minimal effect on the evolution of skeletal muscle damage. In addition, a local deformation threshold for damage was found, which was similar for each of the loading regimes applied in this study. For short loading periods, these results imply that local tissue deformations determine whether muscle damage will develop and the exposure time influences the amount of tissue damage. Temporary load reliefs were inefficient in reducing deformation-induced damage, but may still influence the development of ischemia-induced damage during longer loading periods.

Validation of a numerical model of skeletal muscle compression with MR tagging: a contribution to pressure ulcer research.

Sustained tissue compression can lead to pressure ulcers, which can either start superficially or within deeper tissue layers. The latter type includes deep tissue injury, starting in skeletal muscle underneath an intact skin. Since the underlying damage mechanisms are poorly understood, prevention and early detection are difficult. Recent in vitro studies and in vivo animal studies have suggested that tissue deformation per se can lead to damage. In order to conclusively couple damage to deformation, experiments are required in which internal tissue deformation and damage are both known. Magnetic resonance (MR) tagging and T2-weighted MR imaging can be used to measure tissue deformation and damage, respectively, but they cannot be combined in a protocol for measuring damage after prolonged loading. Therefore, a dedicated finite element model was developed to calculate strains in damage experiments. In the present study, this model, which describes the compression of rat skeletal muscles, was validated with MR tagging. Displacements from both the tagging experiments and the model were interpolated on a grid and subsequently processed to obtain maximum shear strains. A correlation analysis revealed a linear correlation between experimental and numerical strains. It was further found that the accuracy of the numerical prediction decreased for increasing strains, but the positive predictive value remained reasonable. It was concluded that the model was suitable for calculating strains in skeletal muscle tissues in which damage is measured due to compression.

Compression-induced damage and internal tissue strains are related.

Prolonged mechanical loading of soft tissues adjacent to bony prominences can lead to degeneration of muscle tissue, resulting in a condition termed pressure-related deep tissue injury. This type of deep pressure ulcers can develop into a severe wound, associated with problematic healing and a variable prognosis. Limited knowledge of the underlying damage pathways impedes effective preventive strategies and early detection. Traditionally, pressure-induced ischaemia has been thought to be the main aetiological factor for initiating damage. Recent research, however, proposes tissue deformation per se as another candidate for initiating pressure-induced deep tissue injury. In this study, different strain parameters were evaluated on their suitability as a generic predictive indicator for deep tissue injury. With a combined animal-experimental numerical approach, we show that there is a reproducible monotonic increase in damage with increasing maximum shear strain once a strain threshold has been exceeded. This relationship between maximum shear strain and damage seems to reflect an intrinsic muscle property, as it applied across a considerable number of the experiments. This finding confirms that tissue deformation per se is important in the aetiology of deep tissue injury. Using dedicated finite element modeling, a considerable reduction in the inherent biological variation was obtained, leading to the proposal that muscle deformation can prove a generic predictive indicator of damage.

Compression-induced deep tissue injury examined with magnetic resonance imaging and histology.

The underlying mechanisms leading to deep tissue injury after sustained compressive loading are not well understood. It is hypothesized that initial damage to muscle fibers is induced mechanically by local excessive deformation. Therefore, in this study, an animal model was used to study early damage after compressive loading to elucidate on the damage mechanisms leading to deep pressure ulcers. The tibialis anterior of Brown-Norway rats was loaded for 2 h by means of an indenter. Experiments were performed in a magnetic resonance (MR)-compatible loading device. Muscle tissue was evaluated with transverse relaxation time (T2)-weighted MRI both during loading and up to 20 h after load removal. In addition, a detailed examination of the histopathology was performed at several time points (1, 4, and 20 h) after unloading. Results demonstrated that, immediately after unloading, T2-weighted MR images showed localized areas with increased signal intensity. Histological examination at 1 and 4 h after unloading showed large necrotic regions with complete disorganization of the internal structure of the muscle fibers. Hypercontraction zones were found bilateral to the necrotic zone. Twenty hours after unloading, an extensive inflammatory response was observed. The proposed relevance of large deformation was demonstrated by the location of damage indicated by T2-weighted MRI and the histological appearance of the compressed tissues. Differences in damage development distal and proximal to the indenter position suggested a contribution of perfusion status in the measured tissue changes that, however, appeared be to reversible.

A new MR-compatible loading device to study in vivo muscle damage development in rats due to compressive loading.

To study the aetiology of pressure ulcers an MR-compatible loading device was developed. Magnetic resonance imaging provides the possibility of non-invasive evaluation of muscle tissue after compressive loading. Pressure was applied to the tibialis anterior region of rats by means of an indenter. The developed MR-compatible loading device allowed high quality consecutive MR measurements for up to 6h. Tissue was evaluated both during and after loading. Two loading protocols were used; a large indentation of 4.5mm (mean pressure 150 kPa) was applied for 2h and a small indentation of 2.9 mm (mean pressure 50 kPa) was applied for 4h. T2-weighted MR images after the large indentation showed an immediate increase in signal intensity, associated with damage, following load removal. After 20 h the signal intensity remained higher in the affected regions. Afterwards the tissue was perfusion fixated for histological examination. Histological evaluation revealed an inflammatory response and severe muscle necrosis. No signal increase was observed after small indentation. With this new set-up, the different factors that may play a role in the onset of muscle damage can be studied, what we believe will lead to a better understanding of the contributing factors to pressure ulcer development.