Mechanical characterization of fibrotic and mineralized tissue in Peyronie's disease.

Peyronie's disease affects penile mechanics, but published research lacks biomechanical characterization of affected tunica albuginea. This work aims to establish mechanical testing methodology and characterize pathological tissue mechanics of Peyronie's disease. Tunica albuginea was obtained from patients (n = 5) undergoing reconstructive surgery for Peyronie's disease, sectioned into test specimens (n = 12), stored frozen at -20 °C, and imaged with micro-computed tomography (µCT). A tensile testing protocol was developed based on similar soft tissues. Correlation of mechanical summary variables (force, displacement, stiffness, work, Young's modulus, ultimate tensile stress, strain at ultimate tensile stress, and toughness) and µCT features were assessed with linear regression. Specimens empirically grouped into hard or soft stress-strain behavior were compared using a Student's t-test. Surface strain and failure patterns were described qualitatively. Specimens displayed high inter- and intra-subject variability. Mineralization volume was not correlated with mechanical parameters. Empirically hard tissue had higher ultimate tensile stress. Failure mechanisms and strain patterns differed between mineralized and non-mineralized specimens. Size, shape, and quantity of mineralization may be more important in determining Peyronie's disease plaque behavior than presence of mineralization alone, and single summary variables like modulus may not fully describe mechanical behavior.

Ankle fusion and replacement gait similar post-surgery, but still exhibit differences versus controls regardless of footwear.

Persons with ankle osteoarthritis (AOA) often seek surgical intervention to alleviate pain and restore function; however, recent research has yielded no superior choice between the two primary options: fusion and replacement. One factor yet to be considered is the effect of footwear on biomechanical outcomes. Comparisons of AOA biomechanics to a normative population are also sparse. The objectives of this study were to (1) determine how footwear uniquely affected gait in persons with ankle fusion and replacement and (2) provide context for AOA biomechanics via comparisons to a healthy adult sample. Thirty-four persons with AOA performed overground walking trials barefoot and shod before surgical intervention and then received either an ankle fusion (n = 14) or replacement (n = 20). Two and/or three years post-surgery, patients returned for gait analysis. Nineteen controls performed the same gait procedures during a single study visit. Spatiotemporal variables and peak angles, internal moments, powers, and forces were calculated to quantify gait behavior. Overall, the two surgical groups performed similarly to each other but demonstrated marked differences from controls both pre- and post-surgery. No significant differences were detected when examining the effect of footwear. The motion of the midfoot with respect to the hindfoot and forefoot may be instrumental in gait biomechanics following an ankle fusion or replacement and should be considered in future investigations.

Calibration of the shear wave speed-stress relationship in in situ Achilles tendons using cadaveric simulations of gait and isometric contraction.

It has been shown that shear wave speed is directly dependent on axial stress in ex vivo tendons. Hence, a wave speed sensor could be used to track tendon loading during movement. However, adjacent soft tissues and varying joint postures may affect the wave speed-load relationship for intact tendons. The purpose of this study was to determine whether the proportional relationship between squared wave speed and stress holds for in situ cadaveric Achilles tendons, to evaluate whether this relationship is affected by joint angle, and to assess potential calibration techniques. Achilles tendon wave speed and loading were simultaneously measured during cadaveric simulations of gait and isometric contractions performed in a robotic gait simulator. Squared wave speed and axial stress were highly correlated during isometric contraction at all ankle postures (R2avg = 0.98) and during simulations of gait (R2avg = 0.92). Ankle plantarflexion angle did not have a consistent effect on the constant of proportionality (p = 0.217), but there was a significant specimen-angle interaction effect (p < 0.001). Wave speed-based predictions of tendon stress were most accurate (average RMS error = 11% of maximum stress) when calibrating to isometric contractions performed in a dorsiflexed posture that resembled the posture at peak Achilles loading during gait. The results presented here show that the linear relationship between tendon stress and squared shear wave speed holds for a case resembling in vivo conditions, and that calibration during an isometric task can yield accurate predictions of tendon loading during a functional task.

Does Coronal Plane Malalignment of the Tibial Insert in Total Ankle Arthroplasty Alter Distal Foot Bone Mechanics? A Cadaveric Gait Study.

BACKGROUND: Total ankle arthroplasty (TAA) is becoming a more prevalent treatment for end-stage ankle arthritis. However, the effects of malalignment on TAA remain poorly understood. QUESTIONS/PURPOSES: The purpose of this study was to quantify the mechanical effects of coronal plane malalignment of the tibial insert in TAA using cadaveric gait simulation. Specifically, we asked, is there a change in (1) ankle joint congruency, (2) kinematic joint position, (3) kinematic ROM, (4) peak plantar pressure, and (5) center of pressure with varus and valgus malalignment? METHODS: A modified TAA was implanted into seven cadaveric foot specimens. Wedges were used to simulate coronal plane malalignment of the tibial insert. The degree of malalignment (tibial insert angle [TIA] and talar component angle [TCA]) was quantified radiographically for neutral and 5°, 10°, and 15° varus and valgus wedges. Dynamic walking at 1/6 of physiological speed was simulated using a robotic gait simulator. A motion capture system was used to measure foot kinematics, and a pressure mat was used to measure plantar pressure. Joint congruency was quantified as the difference between TIA and TCA. Continuous joint position, joint ROM, peak plantar pressure, and center of pressure for varus and valgus malalignment compared with neutral alignment were estimated using linear mixed effects regression. Pairwise comparisons between malalignment conditions and neutral were considered significant if both the omnibus test for the overall association between outcome and malalignment and the individual pairwise comparison (adjusted for multiple comparisons within a given outcome) had p ≤ 0.05. RESULTS: Descriptively, the TIA and TCA were both less pronounced than the wedge angle and component incongruence was seen (R = 0.65; p < 0.001). Varus malalignment of the tibial insert shifted the tibiotalar joint into varus and internally rotated the joint. The tibiotalar joint's ROM slightly increased as the TIA shifted into varus (1.3 ± 0.7° [mean ± SD] [95% confidence interval -0.7 to 3.4]; p = 0.03), and the first metatarsophalangeal joint's ROM decreased as the TIA shifted into varus (-1.9 ± 0.9° [95% CI -5.6 to 1.7]; p = 0.007). In the sagittal plane, the naviculocuneiform joint's ROM slightly decreased as the TIA shifted into varus (-0.9 ± 0.4° [95% CI -2.1 to 0.3]; p = 0.017). Hallux pressure increased as the TIA became more valgus (59 ± 50 kPa [95% CI -88 to 207]; p = 0.006). The peak plantar pressure slightly decreased in the third and fourth metatarsals as the TIA shifted into valgus (-15 ± 17° [95% CI -65 to 37]; p = 0.03 and -8 ± 4° [95% CI -17 to 1]; p = 0.048, respectively). The fifth metatarsal's pressure slightly decreased as the TIA shifted into valgus (-18 ± 12 kPa [95% CI -51 to 15]) or varus (-7 ± 18 kPa [95% CI -58 to 45]; p = 0.002). All comparisons were made to the neutral condition. CONCLUSIONS: In this cadaver study, coronal plane malalignment in TAA altered foot kinematics and plantar pressure. In general, varus TAA malalignment led to varus shift and internal rotation of the tibiotalar joint, a slight increase in the tibiotalar ROM, and a slight decrease in the first metatarsophalangeal ROM, while a valgus TAA malalignment was manifested primarily through increased hallux pressure with a slight off-loading of the third and fourth metatarsals. CLINICAL RELEVANCE: This study may increase our understanding of the biomechanical processes that underlie the unfavorable clinical outcomes (such as, poor patient-reported outcomes or implant loosening) that have been associated with coronal plane malalignment of the tibial component in TAA.

Anteroposterior Translational Malalignment of Ankle Arthrodesis Alters Foot Biomechanics in Cadaveric Gait Simulation.

Tibiotalar arthrodesis is a common surgical treatment for end-stage ankle arthritis. Proper ankle alignment is important as malalignment can lead to complications that may require revision surgery. This study aimed to determine how anteroposterior (AP) translational malalignment of ankle arthrodesis affects distal foot joint kinematics and plantar pressure. Ankle arthrodesis was performed on 10 cadaveric foot specimens using a custom fixture that could fuse the ankle neutrally and induce discrete malalignments (3, 6, and 9 mm) anteriorly and posteriorly. Gait was simulated under each alignment with a robotic gait simulator, and foot bone motion and plantar pressure were quantified. AP translational malalignment did not substantially affect plantar pressure or joint range of motion, but there were several significant differences in joint position throughout stance phase. Differences were seen in five joints (talocalcaneal, talonavicular, calcaneocuboid, fifth tarsometatarsal, and first metatarsophalangeal) and in the position of the first metatarsal relative to the talus. The most extreme effects occurred when the talus was displaced 6 mm or more posteriorly. In vivo, this may lead to aberrant joint loading, which could negatively impact patient outcomes. © 2019 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 38:450-458, 2020.

Altered Range of Motion and Plantar Pressure in Anterior and Posterior Malaligned Total Ankle Arthroplasty: A Cadaveric Gait Study.

BACKGROUND: Malaligned ankle arthroplasty components have been associated with increased postoperative pain and reduced ankle range of motion. With this study, we aimed to quantify how anterior and posterior malalignment of the talar component affects foot bone kinematics and plantar pressures in a dynamic, cadaveric gait simulation. METHODS: Ten cadaveric foot specimens received a modified ankle prosthesis. Proper alignment was defined as the prosthesis being neutral to a plantigrade foot, where varus/valgus and internal/external rotation were determined using the tibial alignment guide from the prosthesis manufacturer. Axially loaded lateral radiographs were made to measure the tibiotalar ratio (TTR) preoperatively and postoperatively. Specimens were prepared for gait simulation and mounted into the robotic gait simulator. Foot bone kinematics and plantar pressures were measured for each alignment condition. RESULTS: Posterior malalignment of the talar component decreased mean sagittal-plane range of motion (p ≤ 0.0005) in the tibiotalar joint (by up to 3.9°) and in the first metatarsophalangeal joint (by up to 7.7°) and increased sagittal-plane range of motion (p ≤ 0.0005) in the calcaneocuboid joint (by up to 2.0°). Posterior malalignment increased mean transverse-plane range of motion (p ≤ 0.0005 and p = 0.012) in the tibiotalar joint (by up to 2.3°) and in the calcaneocuboid joint (by 2.3°). Posterior malalignment decreased mean peak plantar pressures (p = 0.001 and p = 0.013) under the hallux and the first metatarsal (by up to 82.1 and 110.1 kPa, respectively) and increased (p = 0.012 and p = 0.0006) peak plantar pressures under the third metatarsal and the hindfoot (by 23.0 and 47.8 kPa, respectively). Anterior malalignment decreased (p = 0.0006) mean hindfoot peak plantar pressure (by 127.7 kPa). Anterior and posterior malalignments shifted center of pressure laterally during early and late stance. The TTR weakly to moderately correlated with range-of-motion changes in the tibiotalar, calcaneocuboid, and first metatarsophalangeal joints (r ≤ 0.39) and weakly correlated with plantar pressure changes under the hindfoot, the first metatarsal, and the hallux (r ≤ 0.15). CONCLUSIONS: Anterior and posterior malalignments of the talar component altered foot bone kinematics and plantar pressures. Mild malalignments produced fewer significant differences than moderate and extreme malalignments. A greater number of significant differences were found for posterior malalignments than for anterior. The TTR weakly to moderately correlated with changes in range of motion and plantar pressures. CLINICAL RELEVANCE: The observed changes in range of motion and plantar pressures may explain why malaligned ankle arthroplasties are associated with unfavorable clinical outcomes and poor prosthesis longevity. Posterior malalignments may produce worse clinical outcomes than anterior malalignments.

Passive engineering mechanism enhancement of a flexor digitorum longus tendon transfer procedure.

Standard treatments of adult acquired flatfoot deformity (AAFD) fail to correct associated dysfunction of the posterior tibial tendon (PTT). This study aimed to determine if a novel passive engineering mechanism (PEM) enhanced flexor digitorum longus (FDL) tendon transfer procedure would better restore physiologic PTT function to improve AAFD gait parameters compared to standard treatment. We evaluated the kinetic, pedobarographic, and kinematic effects of a pulley-based PEM-enhancement system utilizing a cadaveric flatfoot model and robotic gait simulator. FDL tendon force, FDL tendon excursion, regional peak plantar pressures, center of pressure, and foot bone/joint motions were quantified. Throughout the stance phase of gait, PEM-enhancement significantly increased FDL tendon forces, resulting in gait cycle medial column unloading, lateral column loading, forefoot adduction, hindfoot inversion, and increased plantar flexion (p < 0.05). This proof-of-concept study demonstrated that an innovative PEM-enhanced FDL tendon transfer procedure better restored physiologic PTT function, resulting in improved correction of the distinctive AAFD gait characteristics-medial column collapse, hindfoot eversion, and forefoot abduction. Clinical significance: Novel PEM-enhancement of a FDL tendon transfer procedure holds promise as a method for improved treatment of AAFD. © 2018 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 36:3033-3042, 2018.

A three-year prospective comparative gait study between patients with ankle arthrodesis and arthroplasty.

BACKGROUND: End-stage ankle arthritis is a debilitating condition that often requires surgical intervention after failed conservative treatments. Ankle arthrodesis is a common surgical option, especially for younger and highly active patients; however, ankle arthroplasty has become increasingly popular as advancements in implant design improve device longevity. The longitudinal differences in biomechanical outcomes between these surgical treatments remain indistinct, likely due to the challenges associated with objective study of a heterogeneous population. METHODS: Patients scheduled for arthroplasty (n = 27) and arthrodesis (n = 20) were recruited to participate in this three-year prospective study. Postoperative functional outcomes were compared at distinct annual time increments using measures of gait analysis, average daily step count and survey score. FINDINGS: Both surgical groups presented reduced pain, improved survey scores, and increased walking speed at the first-year postoperative session, which were generally consistent across the three-year follow-up. Arthrodesis patients walked with decreased sagittal ankle RoM, increased sagittal hip RoM, increased step length, and increased transient force at heel strike, postoperatively. Arthroplasty patients increased ankle RoM and cadence, with no changes in hip RoM, step length or heel strike transient force. INTERPRETATION: Most postoperative changes were detected at the first-year follow-up session and maintained across the three-year time period. Despite generally favorable outcomes associated with both surgeries, several underlying postoperative biomechanical differences were detected, which may have long-term functional consequences. Furthermore, neither technique was able to completely restore gait biomechanics to the levels of the contralateral unaffected limb, leaving potential for the development of improved surgical and rehabilitative treatments.

Modeling the effect of collagen fibril alignment on ligament mechanical behavior.

Ligament mechanical behavior is primarily regulated by fibrous networks of type I collagen. Although these fibrous networks are typically highly aligned, healthy and injured ligament can also exhibit disorganized collagen architecture. The objective of this study was to determine whether variations in the collagen fibril network between neighboring ligaments can predict observed differences in mechanical behavior. Ligament specimens from two regions of bovine fetlock joints, which either exhibited highly aligned or disorganized collagen fibril networks, were mechanically tested in uniaxial tension. Confocal microscopy and FiberFit software were used to quantify the collagen fibril dispersion and mean fibril orientation in the mechanically tested specimens. These two structural parameters served as inputs into an established hyperelastic constitutive model that accounts for a continuous distribution of planar fibril orientations. The ability of the model to predict differences in the mechanical behavior between neighboring ligaments was tested by (1) curve fitting the model parameters to the stress response of the ligament with highly aligned fibrils and then (2) using this model to predict the stress response of the ligament with disorganized fibrils by only changing the parameter values for fibril dispersion and mean fibril orientation. This study found that when using parameter values for fibril dispersion and mean fibril orientation based on confocal imaging data, the model strongly predicted the average stress response of ligaments with disorganized fibrils ([Formula: see text]); however, the model only successfully predicted the individual stress response of ligaments with disorganized fibrils in half the specimens tested. Model predictions became worse when parameters for fibril dispersion and mean fibril orientation were not based on confocal imaging data. These findings emphasize the importance of collagen fibril alignment in ligament mechanics and help advance a mechanistic understanding of fibrillar networks in healthy and injured ligament.

A validated software application to measure fiber organization in soft tissue.

The mechanical behavior of soft connective tissue is governed by a dense network of fibrillar proteins in the extracellular matrix. Characterization of this fibrous network requires the accurate extraction of descriptive structural parameters from imaging data, including fiber dispersion and mean fiber orientation. Common methods to quantify fiber parameters include fast Fourier transforms (FFT) and structure tensors; however, information is limited on the accuracy of these methods. In this study, we compared these two methods using test images of fiber networks with varying topology. The FFT method with a band-pass filter was the most accurate, with an error of [Formula: see text] in measuring mean fiber orientation and an error of [Formula: see text] in measuring fiber dispersion in the test images. The accuracy of the structure tensor method was approximately five times worse than the FFT band-pass method when measuring fiber dispersion. A free software application, FiberFit, was then developed that utilizes an FFT band-pass filter to fit fiber orientations to a semicircular von Mises distribution. FiberFit was used to measure collagen fibril organization in confocal images of bovine ligament at magnifications of [Formula: see text] and [Formula: see text]. Grayscale conversion prior to FFT analysis gave the most accurate results, with errors of [Formula: see text] for mean fiber orientation and [Formula: see text] for fiber dispersion when measuring confocal images at [Formula: see text]. By developing and validating a software application that facilitates the automated analysis of fiber organization, this study can help advance a mechanistic understanding of collagen networks and help clarify the mechanobiology of soft tissue remodeling and repair.