Investigation of neomycin biodegradation conditions using ericoid mycorrhizal and white rot fungal species.

BACKGROUND: In the search for methods to biodegrade recalcitrant compounds, the use of saprotrophic fungi and white rot fungi, in particular belonging to the phylum Basidiomycota, has gained interest. This group of fungi possesses a battery of unspecific extracellular enzymes that can be utilized in the biodegradation of preferably phenolic compounds. In this work, it was investigated under which conditions the white rot fungus Trametes versicolor and the ericoid mycorrhizal fungus Rhizoscyphus ericae (belonging to the phylum Ascomycota) could be used to biodegrade the antibiotic aminoglycoside neomycin at co-metabolic conditions in which external nutrients were supplied. Furthermore, it was also investigated whether a biodegradation could be accomplished using neomycin as the sole nutrient. RESULTS: The results show that both species can biodegrade neomycin 70% under co-metabolic conditions during a one-week time course and that Rhizoscyphus ericae is able to use neomycin as sole nutrient and to approximatively biodegrade it 60% under chosen non co-metabolic conditions. At selected conditions, the biodegradation of neomycin using Rhizoscyphus ericae was monitored by oxidation products of D-ribose which is a hydrolysis product of neomycin. CONCLUSION: The results are of general interest in the search for fungal species that can biodegrade recalcitrant compounds without the need of external nutrients. The key future application area that will be investigated is purification of waste from recombinant protein production in which neomycin, nutrients and E. coli with neomycin resistance genes are present.

Neomycin removal using the white rot fungus Trametes versicolor.

The presence of antibiotic resistance genes in wastewater treatment plants (WWTPs), and in river and lake recipients show the need to develop new antibiotic removal strategies. The aminoglycoside antibiotic class is of special concern since the chemical structure of these compounds limits the choices of removal technologies. The experimental design included fungal mediated in vivo and in vitro experiments. The experiments were performed in Erlenmeyer flasks under non-sterile conditions. In the study, the role of the laccase redox mediator 4-hydroxy benzoic acid (HBA) in the removal of neomycin was investigated. The specific objective of the study was to conclude whether it is possible to use the white rot fungus (WRF) Trametes versicolor to biodegrade neomycin. It was shown that it is feasible to remove 34% neomycin in vitro (excluding living fungal cells) by laccase-HBA mediated extracellular biodegradation. In the in vivo experiments, polyurethane foam (PUF) was used as supporting material to immobilize fungal mycelia on. The presence of living fungal cells facilitated a removal of approximately 80% neomycin in the absence of HBA. Using liquid chromatography-high resolution-mass spectrometry, it was possible to tentatively identify oxidation products of neomycin hydrolysates. The results in this study open up the possibility to implement a pretreatment plant (PTP) aimed for neomycin removal.

Survival and growth of saprotrophic and mycorrhizal fungi in recalcitrant amine, amide and ammonium containing media.

The elimination of hazardous compounds in chemical wastes can be a complex and technically demanding task. In the search for environmental-friendly technologies, fungal mediated remediation and removal procedures are of concern. In this study, we investigated whether there are fungal species that can survive and grow on solely amine-containing compounds. One compound containing a primary amine group; 2-diethylaminoethanol, one compound with a primary amide group; 2,6-dichlorobenzamide (BAM), and a third compound containing a quaternary ammonium group; N3-trimethyl(2-oxiranyl)methanaminium chloride, were selected. The choice of these compounds was motivated by their excessive use in large scale manufacturing of protein separation media (2-diethylaminoethanol and the quaternary amine). 2,6-dichlorobenzamide, the degradation product of the herbicide 2,6-dichlorobenzonitrile (dichlobenil), was chosen since it is an extremely recalcitrant compound. Utilising part of the large fungal diversity in Northern European forests, a screening study using 48 fungal isolates from 42 fungal species, including saprotrophic and mycorrhizal fungi, was performed to test for growth responses to the chosen compounds. The ericoid (ERM) mycorrhizal fungus Rhizoscyphus ericae showed the best overall growth on 2-diethylaminoethanol and BAM in the 1-20 g L-1 concentration range, with a 35-fold and 4.5-fold increase in biomass, respectively. For N3-trimethyl(2-oxiranyl)methanaminium chloride, the peak growth occurred at 1 g L-1. In a second experiment, including three of the most promising fungi (Laccaria laccata, Hygrophorus camarophyllus and Rhizoscyphus ericae) from the screening experiment, a simulated process water containing 1.9% (w/v) 2-diethylaminoethanol and 0.8% (w/v) N3-trimethyl(2-oxiranyl)methanaminium chloride was used. Laccaria laccata showed the best biomass increase (380%) relative to a control, while the accumulation for Rhizoscyphus ericae and Hygrophorus camarophyllus were 292% and 136% respectively, indicating that mycorrhizal fungi can use amine- and amide-containing substrates as nutrients. These results show the potential of certain fungal species to be used in alternative green wastewater treatment procedures.

Removal of nonylphenol polyethoxylates by adsorption on polyurethane foam and biodegradation using immobilized Trametes versicolor.

Nonylphenol polyethoxylates (NPEOs) are banned in EU due to their endocrine disrupting properties. In a proof of concept study including continuous reactor lab-scale experiments, polyurethane foam (PUF)-immobilized Trametes versicolor was used to reduce the concentration levels of these compounds in an acidic nutrient solution over an 18-day period. Biodegradation and adsorption were identified as the major removal principles. A 90% removal was achieved by solely biodegradation in an experimental setup in which steady state conditions occurred, including NPEO-saturated glass and PUF surfaces. Biotransformation products containing mono- and di-ethoxylated nonylphenol, nonylphenol (NP1EO, NP2EO, NP) and nonylphenol polyethoxy carboxylates (NPECs) were tentatively identified. The maximum static NPEO adsorption capacity of PUF (determined with Erlenmeyer flask experiment) was calculated to 106 mg g-1, and the adsorption was described by the Langmuir isotherm equation. The corresponding maximum dynamic adsorption capacity (determined by continuous reactor experiment) was 100 mg g-1. These findings show that PUF is an excellent adsorbent to NPEOs. Therefore, PUF can either be used as a stand-alone adsorbent to NPEOs or as an immobilizing agent for Trametes versicolor through which a highly efficient biodegradation of these potentially harmful compounds can be achieved. The findings can be of importance in the search for alternative methods to remove NPEOs in process effluents.

Removal of diclofenac from a non-sterile aqueous system using Trametes versicolor with an emphasis on adsorption and biodegradation mechanisms.

This paper describes the search for procedures through which the xenobiotic pollutant diclofenac can be removed from non-sterile aquatic systems. Specifically, adsorption to solid supports (carriers) in combination with biodegradation by non-immobilized and immobilized white rot fungus Trametes versicolor were investigated. Batch experiments using polyurethane foam (PUF)-carriers resulted in 99.9% diclofenac removal after 4 h, with monolayer adsorption of diclofenac to carrier and glass surfaces accounting for most of the diclofenac decrease. Enzymatic reactions contributed less, accounting for approximately < 0.5% of this decrease. In bioreactor experiments using PUF-carriers, an initial 100% removal was achieved with biodegradation contributing approximately 7%. In batch experiments that utilized polyethylene-carriers with negligible immobilization of Trametes versicolor, a 98% total diclofenac removal was achieved after one week, with a biodegradation contribution of approximately 14%. Five novel enzyme-catalyzed biodegradation products were tentatively identified in the batch-wise and bioreactor experiments using full scan ultra-high-performance liquid chromatography-quadrupole/time of flight mass spectrometry. Both reduction and oxidation products were found, with the contents estimated to be at µg L-1 concentration levels.

Strategies for selecting optimal sampling and work-up procedures for analysing alkylphenol polyethoxylates in effluents from non-activated sludge biofilm reactors.

Trace-level analysis of alkylphenol polyethoxylates (APEOs) in wastewater containing sludge requires the prior removal of contaminants and preconcentration. In this study, the effects on optimal work-up procedures of the types of alkylphenols present, their degree of ethoxylation, the biofilm wastewater treatment and the sample matrix were investigated for these purposes. The sampling spot for APEO-containing specimens from an industrial wastewater treatment plant was optimized, including a box that surrounded the tubing outlet carrying the wastewater, to prevent sedimented sludge contaminating the collected samples. Following these changes, the sampling precision (in terms of dry matter content) at a point just under the tubing leading from the biofilm reactors was 0.7% RSD. The findings were applied to develop a work-up procedure for use prior to a high-performance liquid chromatography-fluorescence detection analysis method capable of quantifying nonylphenol polyethoxylates (NPEOs) and poorly investigated dinonylphenol polyethoxylates (DNPEOs) at low microg L(-1) concentrations in effluents from non-activated sludge biofilm reactors. The selected multi-step work-up procedure includes lyophilization and pressurized fluid extraction (PFE) followed by strong ion exchange solid phase extraction (SPE). The yields of the combined procedure, according to tests with NP10EO-spiked effluent from a wastewater treatment plant, were in the 62-78% range.

Development of a high-performance liquid chromatography-fluorescence detection method for analyzing nonylphenol/dinonylphenol-polyethoxylate-based phosphate esters.

A novel reversed phase HPLC method for the simultaneous analysis of surfactants containing nonylphenol/dinonylphenol-polyethoxylates and their o-phosphate esters is reported, in which eluting substances are detected fluorescently. Their chemical structures were elucidated by direct infusion electrospray-mass spectrometry in positive mode. The limits of quantification and range of the method were determined to be 0.1mg and 0.1-100 mg surfactant L(-1), respectively, with a reproducibility (RSD) at a concentration of 38 mg surfactant L(-1) of 5.6%. The accuracy was determined by spiking selected process water samples with known amounts of surfactant, and recoveries were typically in the 82-102% range.

Comparison of amine-selective properties of weak and strong cation-exchangers.

The capacity of several weak and strong cation-exchangers to adsorb 2-diethylaminoethanol (DEAE) and (2,3-hydroxypropyl) trimethylammonium chloride (HPMAC) from sodium-containing process water streams, and the ease of subsequently eluting the amines and regenerating the exchangers, were investigated. (2,3-hydroxypropyl) trimethylammonium chloride was enriched 40-fold compared with the initial amine/sodium-ratio in the bulk fluid by Amberlite IRC-50. The highest selectivity for 2-diethylaminoethanol (26-fold) was provided by Imac HP336. Neither of the selected strong cation-exchangers showed any selectivity towards 2-diethylaminoethanol, but they enriched (2,3-hydroxypropyl) trimethylammonium chloride approximately three to four fold. These findings suggest that weak cation-exchangers (WCX) could be readily used for the selective removal of these or similar amines from sodium-containing process waters.

Development of a solid-phase extraction/gas chromatographic-mass spectrometric method for quantification of succinic acid in nucleoside derivatives for oligonucleotide synthesis.

A solid-phase extraction (SPE)/gas chromatographic-mass spectrometric (GC-MS) method was developed for analysing residual succinic acid in nucleoside derivatives to be used in oligonucleotide synthesis. Use of a SPE protocol, enabled most of the derivatives to be trapped, thereby creating eluates enriched in succinic acid. GC-MS was used to quantify the amount of residual succinic acid in four different nucleoside preparations, with succinate concentrations varying from 0.18 to 0.24% (w/w). The within-day repeatability of the method was found to be 1.25% RSD. A linear relationship was observed between the amount of succinic acid in the sample and the GC-MS peak area, with a correlation coefficient of 0.9997 in the concentration interval 0.05-2.5% (w/w). Recoveries were measured by the addition of internal standards to working solutions and varied between 99.8 and 102.6%.