Configuration of Novel Experimental Fractographic Reverse Engineering Approach Based on Relationship between Spectroscopy of Ruptured Surface and Fracture Behaviour of Rubber Sample.

A novel fractographic approach based on a combination of (i) mechanical behavior of cured rubber in uniaxial tensile loading and (ii) spectroscopy of fracture on a ruptured surface was experimentally validated. This approach related the migration of paraffin oil from a matrix to the ruptured rubber surface, to the tearing energy related to the deformation speed responsible for total rubber sample rupture, and the approach itself was configured experimentally. It was evaluated on cured natural rubber (NR) for two different paraffin oil concentrations. Single edge notched tensile (SENT) samples were subjected to uniaxial tensile loadings at two different deformation speeds. First, the tearing energy as a function of deformation speed was determined for each defined oil concentration. Secondly, at specific locations on the ruptured surfaces, infrared (IR) spectroscopy was performed to quantify a characteristic absorbance peak height of migrated paraffin oil during the rupture process. The results of the IR analyses were related to the deformation speed to understand the relation between the amount of migrated paraffin oil during the fracture process and the deformation speed which brought about such a fracture. This novel approach enhanced the reverse engineering process of rubber fracture related to the cause of tearing energies during critical failure.

Effect of hydrophilicity of polyaniline particles on their electrorheology: steady flow and dynamic behaviour.

Electrorheological properties of suspensions are considerably affected by hydrophilicity of suspension particles. As a model material, polyaniline base powder protonated with sulfamic, tartaric, or perfluorooctanesulfonic acids provided particles of various hydrophilicity. The experiments revealed that, in the absence of electric field, due to a good compatibility of hydrophobic polyaniline particles with silicone-oil medium, their interactions were limited and the viscosity of suspension was low. When the electric field was applied, the rigidity of the polarized chain structure of the particles increased and, consequently, viscosity increased as well. In the contrast, the field-off suspension viscosity of highly interacting hydrophilic particles, which are incompatible with the oil, and where particle aggregation may set in, was high especially at low shear rates, and the material had a pseudoplastic character. Then, a relative increase in viscosity due to the polarization of the particles or their clusters in the electric field was much lower than in the former case. Due to a different primary structure of suspension, depending on the particle compatibility with the oil the field-off storage modulus of suspensions of hydrophobic particles was lower than the loss modulus, while in suspensions of hydrophilic particles the former modulus dominated. In both cases, an increase in elasticity with increasing electric field strength was higher than that in viscosity.