The HOCl dry fog-is it safe for human cells?

This study aims to investigate if high-concentration HOCl fogging disinfection causes cytotoxicity and genotoxicity to cultured primary human skin fibroblasts. The cells were exposed to a dry fog of HOCl produced from solutions with a concentration of 300 ppm (5.72 mM) or 500 ppm (9.53 mM). After four times when fibroblasts were exposed to aerosolized HOCl at a concentration of 500 ppm for 9 minutes, significant cytotoxicity and genotoxicity effects were observed. Significant changes in the morphology of fibroblasts and cell death due to membrane disruption were observed, independent of the number of exposures. Flow cytometry analyses performed under these experimental conditions indicated a decrease in the number of cells with an intact cell membrane in the exposed samples compared to the sham samples, dropping to 49.1% of the total cells. Additionally, under the same conditions, the neutral comet assay results demonstrated significant DNA damage in the exposed cells. However, no analogous damages were found when the cells were exposed to aerosolized HOCl generated from a 300-ppm solution for 3 minutes, whether once or four times. Therefore, we have concluded that aerosolized HOCl in dry fog, with a concentration exceeding 300 ppm, can cause cytotoxic and genotoxic effects on human skin fibroblasts.

Preliminary Study on the Effect of a Single High-Energy Electromagnetic Pulse on Morphology and Free Radical Generation in Human Mesenchymal Stem Cells.

The effect of nanosecond electromagnetic pulses on human health, and especially on forming free radicals in human cells, is the subject of continuous research and ongoing discussion. This work presents a preliminary study on the effect of a single high-energy electromagnetic pulse on morphology, viability, and free radical generation in human mesenchymal stem cells (hMSC). The cells were exposed to a single electromagnetic pulse with an electric field magnitude of ~1 MV/m and a pulse duration of ~120 ns generated from a 600 kV Marx generator. The cell viability and morphology at 2 h and 24 h after exposure were examined using confocal fluorescent microscopy and scanning electron microscopy (SEM), respectively. The number of free radicals was investigated with electron paramagnetic resonance (EPR). The microscopic observations and EPR measurements showed that the exposure to the high-energy electromagnetic pulse influenced neither the number of free radicals generated nor the morphology of hMSC in vitro compared to control samples.

Nanosecond Pulsed Electric Field Only Transiently Affects the Cellular and Molecular Processes of Leydig Cells.

The purpose of this study was to verify whether the nanosecond pulsed electric field, not eliciting thermal effects, permanently changes the molecular processes and gene expression of Leydig TM3 cells. The cells were exposed to a moderate electric field (80 quasi-rectangular shape pulses, 60 ns pulse width, and an electric field of 14 kV/cm). The putative disturbances were recorded over 24 h. After exposure to the nanosecond pulsed electric field, a 19% increase in cell diameter, a loss of microvilli, and a 70% reduction in cell adhesion were observed. Some cells showed the nonapoptotic externalization of phosphatidylserine through the pores in the plasma membrane. The cell proportion in the subG1 phase increased by 8% at the expense of the S and G2/M phases, and the DNA was fragmented in a small proportion of the cells. The membrane mitochondrial potential and superoxide content decreased by 37% and 23%, respectively. Microarray's transcriptome analysis demonstrated a negative transient effect on the expression of genes involved in oxidative phosphorylation, DNA repair, cell proliferation, and the overexpression of plasma membrane proteins. We conclude that nanosecond pulsed electric field affected the physiology and gene expression of TM3 cells transiently, with a noticeable heterogeneity of cellular responses.

The red-light emitting diode irradiation increases proliferation of human bone marrow mesenchymal stem cells preserving their immunophenotype.

PURPOSE: For effective clinical application of human bone marrow mesenchymal stem cells (hBM-MSCs), the enhancement of their proliferation in vitro together with maintaining the expression of their crucial surface antigens and differentiation potential is necessary. The present study aimed to investigate the effect of light-emitting diode (LED) irradiation on hBM-MSCs proliferation after two, five, or nine days post-irradiation. MATERIALS AND METHODS: The hBM-MSCs were exposed to the LED light at 630 nm, 4 J/cm2, and power densities of 7, 17, or 30 mW/cm2. To assess the cell proliferation rate in the sham-irradiated and irradiated samples the cells metabolic activity and DNA content were determined. The number of apoptotic and necrotic cells in the samples was also evaluated. The expression of the crucial surface antigens of the hBM-MSCs up to nine days after irradiation at 4 J/cm2 and 17 mW/cm2 was monitored with flow cytometry. Additionally, the potential of hBM-MSCs for induced differentiation was measured. RESULTS: When the metabolic activity was assayed, the significant increase in the cell proliferation rate by 31 and 50% after the irradiation with 4 J/cm2 and 17 mW/cm2, respectively, was observed at day five and nine when compared to the sham-irradiated cells (p < .05). Similarly, DNA content within the irradiated hBM-MSCs increased by 31 and 41% at day five and nine after the irradiation with 4 J/cm2 and 17 mW/cm2 in comparison to the sham-irradiated cells. LED irradiation did not change the expression of the crucial surface antigens of the hBM-MSCs up to nine days after irradiation at 4 J/cm2 and 17 mW/cm2. At the same experimental conditions, the hBM-MSCs maintain in vitro their capability for multipotential differentiation into osteoblasts, adipocytes, and chondrocytes. CONCLUSION: Therefore, LED irradiation at a wavelength of 630 nm, energy density 4 J/cm2, and power density 17 mW/cm2 can effectively increase the number of viable hBM-MSCs in vitro.

Biological threat detection in the air and on the surface: how to define the risk.

The improvements in the existing methods of rapid detection and biological pathogen surveillance are still needed. The new spectroscopic methods that rely on the unique structural features and intrinsic fluorescence of microorganisms are well fitted for monitoring the spread of airborne biological agents or their reagentless detection in the air, and these methods may bring a new quality to bioaerosols remote detection. This review describes the problem of the confidence in the environmental testing results that may affect clearance standard, sampling techniques, and the estimation of risk of human exposure to the low concentrations of harmful microorganisms during bioterrorist event or naturally occurring outbreaks. Higher recovery efficiency of dangerous biological agents from the air and contaminated surfaces would enable more reliable environmental human risk exposure assessment.

Carriage of antibiotic-resistant Haemophilus influenzae strains in children undergoing adenotonsillectomy.

Haemophilus influenzae is one of the major pathogenic bacteria in upper respiratory tract of children. In this study, the presence of various H. influenzae genotypes were followed-up for at least 13 weeks, starting from one week before surgery. Forty-one children with chronic adenoid hypertrophy were prospectively enrolled to the study. The consecutive swabs of adenoid and tonsils, two before adenotonsillectomy and two after the surgery together with homogenates of adenotonsillar tissues and lysates of the CD14(+) cells fraction were acquired from 34 children undergoing adenotonsillectomy. Up to ten isolates from each patient at each collection period were genotyped using a PFGE method and their capsular type and antibiotic susceptibility was determined. Of the 1001 isolates examined, we identified 325 isolates grouped into 16 persistent genotypes, which colonized throats for more than seven weeks and were not eliminated by the surgery. The other 506 isolates grouped into 48 transient genotypes that had been eliminated by the surgery. The resistance to ampicillin were found in 23.8% of the transient strains, and 4.7% of the newly acquired strains following the surgical intervention. In contrast, none of the persistent strains were resistant to ampicillin; however, these strains showed apparently higher level of resistance to co-trimoxazole when compared to transient strains. The transient and persistent strains did not significantly differ in bacterial viability in the biofilms formed in vitro. Some of the strains were identified in two or three different patients and were considered as the strains circulating in the region between 2010 and 2012.

Use of MTT assay for determination of the biofilm formation capacity of microorganisms in metalworking fluids.

Biofilm formation is a well-known problem in management of metalworking fluid systems. Due to persistence of microorganisms within biofilms, the reappearance of various species of bacteria, including nontuberculous mycobacteria is often observed after the use of biocides and/or cleaning of delivery systems and replacement of cooling fluid. The aim of this study was to determine the usefulness of the tetrazolium salt assay (MTT assay) for assessing the viability of bacteria in biofilms formed in vitro in fresh and used cutting oils, as well as their susceptibility to antimicrobial biocides. Biofilms were established in the microtiter plate format. The results showed that quantification of formazan, a product of the tetrazolium salt reduction by electron transport system could be used for determination of the propensity of bacteria to form biofilms in these complex media. The use of the assay allows also determination of antimicrobial activity of biocides against biofilms in fresh and used metalworking fluids. Biofilms produced by Gram-negative isolates recovered from field metalworking fluids as well as the wild bacterial communities differed in metabolic activity depending on the type of fresh coolants. The MTT assay has high-throughput potential and can be efficiently used for determination of biofilm-forming capacity of microorganisms from individual machines in metalworking industry. The use of the assay may also guide the selection of the most appropriate biocide to fight these microorganisms.

Proteolytic activity of Pseudomonas aeruginosa isolates with TTSS-mediated cytotoxicity and invasiveness to host cells.

Over 100 of Pseudomonas aeruginosa isolates representing the two TTSS genotypes (exoU (-)/exoS (+) or exoU (+)/exoS (-)) were cultured in different media in order to evaluate their proteolytic activities and find a relationship between proteolytic activity and the cytotoxic and/or invasive phenotypes displayed by the strains upon infection of RAW 264.7 murine macrophage-like cells and pulmonary microvascular endothelial cells (PME). The elastolytic activity, protein concentration, and total proteolytic activity (TPA) were measured in culture supernatants. No significant differences were observed in the median elastolytic activities among cytotoxic/noninvasive, noncytotoxic/invasive, and cytotoxic/invasive phenotypes displayed by P. aeruginosa strains. The only significant difference was noted when isolates of the two different TTSS genotypes were grown in a calcium-depleted minimal medium for induction of TTSS (MI). The exoU (-)/exoS (+) isolates showed significant higher levels of the median elastolytic activity when compared to the exoU (+)/exoS (-) isolates. These two groups of isolates secreted the elastase B (LasB) with distinct molecular masses 158 or 116 kD, respectively. The strains of the two TTSS genotypes secreted similar amount of total proteins; however, the higher values of TPA were observed for the isolates of the exoU (+) /exoS (-) genotype when grown in MI medium. We concluded that there is no direct relationship between secretion of proteases with elastolytic activity and the cytotoxic and/or invasive phenotypes of the isolates observed upon infection of both RAW 264.7 and PME monolayers. Further studies are needed to find out whether others factors beside proteases could influence the mechanism of host cells intoxication mediated by the P. aeruginosa TTSS-delivered toxins.

Use of a foam spatula for sampling surfaces after bioaerosol deposition.

The present study had three goals: (i) to evaluate the relative quantities of aerosolized Bacillus atrophaeus spores deposited on the vertical, horizontal top, and horizontal bottom surfaces in a chamber; (ii) to assess the relative recoveries of the aerosolized spores from glass and stainless steel surfaces with a polyester swab and a macrofoam sponge wipe; and (iii) to estimate the relative recovery efficiencies of aerosolized B. atrophaeus spores and Pantoea agglomerans using a foam spatula at several different bacterial loads by aerosol distribution on glass surfaces. The majority of spores were collected from the bottom horizontal surface regardless of which swab type and extraction protocol were used. Swabbing with a macrofoam sponge wipe was more efficient in recovering spores from surfaces contaminated with high bioaerosol concentrations than swabbing with a polyester swab. B. atrophaeus spores and P. agglomerans culturable cells were detected on glass surfaces using foam spatulas when the theoretical surface bacterial loads were 2.88 x 10(4) CFU and 8.09 x 10(6) CFU per 100-cm(2) area, respectively. The median recovery efficiency from the surfaces using foam spatulas was equal to 9.9% for B. atrophaeus spores when the recovery was calculated relative to the theoretical surface spore load. Using a foam spatula permits reliable sampling of spores on the bioaerosol-exposed surfaces in a wide measuring range. The culturable P. agglomerans cells were recovered with a median efficiency of 0.001%, but staining the swab extracts with fluorescent dyes allowed us to observe that the viable cell numbers were higher by 1.83 log units than culturable organisms. However, additional work is needed to improve the analysis of the foam extracts in order to decrease the limit of detection of Bacillus spores and Gram-negative bacteria on contaminated surfaces.

Diverse type III secretion phenotypes among Pseudomonas aeruginosa strains upon infection of murine macrophage-like and endothelial cell lines.

The interaction of over 100 isolates of Pseudomonas aeruginosa representing different genotypes of type III secretion system (TTSS) with RAW 264.7 murine macrophage-like cells and pulmonary microvascular endothelial (PME) cells were studied. The strains were isolated from clinical materials and from stool specimens of healthy carriers and were analyzed by pulsed field gel electrophoresis (PFGE) to characterize their heterogeneity. In order to differentiate TTSS genotypes of P. aeruginosa isolates, the distribution of the following genes: exoU, exoS, pcrV, exoT, and exoY was assessed by multiplex and duplex PCR assays. The cytotoxicity and invasiveness of the P. aeruginosa isolates were determined. P. aeruginosa isolates showed a discrepancy in their ability to induce cytotoxicity and to invade mammalian cells. Up to four phenotypes among the isolates were observed and the most diverse interactions of the isolates were noticed with PME cells. The reduction of the viability of the cells, infected by P. aeruginosa isolates of the same clone, was associated with the ability of these strains to secrete the TTSS effectors: ExoU or ExoS. The results of this study also suggest that healthy people can be the carriers of cytotoxic strains of this dangerous pathogen.