Mechanical and Surface Characteristics of Selective Laser Melting-Manufactured Dental Prostheses in Different Processing Stages.

Due to the expansion of the use of powder bed fusion metal additive technologies in the medical field, especially for the realization of dental prostheses, in this paper, the authors propose a comparative experimental study of the mechanical characteristics and the state of their microscale surfaces. The comparison was made from material considerations starting from two dental alloys commonly used to realize dental prostheses: Ni-Cr and Co-Cr, but also technologies for obtaining selective laser melting (SLM) and conventional casting. In addition, to compare the performances with the classical casting technology, for the dental prostheses obtained through SLM, the post-processing stage in which they are in a preliminary finishing and polished state was considered. Therefore, for the determination of important mechanical characteristics and the comparative study of dental prostheses, the indentation test was used, after which the hardness, penetration depths (maximum, permanent, and contact depth), contact stiffness, and contact surface were established, and for the determination of the microtopography of the surfaces, atomic force microscopy (AFM) was used, obtaining the local areal roughness parameters at the miniaturized scale-surface average roughness, root-mean-square roughness (RMS), and peak-to-peak values. Following the research carried out, several interesting conclusions were drawn, and the superiority of the SLM technology over the classic casting method for the production of dental prostheses in terms of some mechanical properties was highlighted. At the same time, the degree of finishing of dental prostheses made by SLM has a significant impact on the mechanical characteristics and especially the local roughness parameters on a miniaturized scale, and if we consider the same degree of finishing, no major differences are observed in the roughness parameters of the surfaces of the prostheses produced by different technologies.

The Impact of Peripheral Vision on Manual Reaction Time Using Fitlight Technology for Handball, Basketball and Volleyball Players.

The purpose of the research was to identify the impact of peripheral (unilateral and bilateral) vision on manual reaction time to visual stimuli in handball, basketball and volleyball players by implementing a 6-week experimental program of specific exercises and some adapted tests using Fitlight technology. The research included 412 players (212 male-51.5%; 200 female-48.5%) from three team sports: basketball-146 (35.4%), handball-140 (40%) and volleyball-126 (30.6%). The experimental program carried out over 6 weeks was identical for all handball, basketball and volleyball players participating in the study; two training sessions per week were performed, with each session lasting 30 min; 15 exercises were used for the improvement of manual reaction time to visual stimuli involving peripheral vision. Through the Analysis of Variance (ANOVA), we identified statistically significant differences between the arithmetic means of the samples of handball, basketball and volleyball players, as well as according to general samples also of gender (male and female), p = 0.000. Male and female handball samples achieved the greatest progress in manual reaction time to visual stimuli involving peripheral vision for the Reaction time test with a unilateral right visual stimulus (30 s) and the Reaction time test with a unilateral left visual stimulus (30 s), while general sample also of male and female basketball samples, for the Reaction time test with bilateral visual stimuli (30 s) and the Reaction time test with six Fitlights (1 min); male and female volleyball samples recorded the lowest progress in all tests compared to handball and basketball groups. According to our results, female samples made greater progress in reaction time than male groups for all four tests of the present study. The implemented experimental program led to an improvement in manual reaction time to visual stimuli due to the use of Fitlight technology and the involvement of peripheral vision for all research samples.

The Effect of Ca and Mg on the Microstructure and Tribological Properties of YPbSn10 Antifriction Alloy.

An alloy YPbSn10 used for antifriction applications was synthetized in a furnace and the structure was improved by a microalloying technique. The elements chosen for microalloying were Ca 2%wt and Mg 2%wt. The microalloying technique proved to have good results in producing alloys with homogeneous composition, with a good distribution of the hard phase. The alloys were produced in a furnace and samples were collected and investigated. The structural properties were investigated using an SEM technique with EDS analyses and XRD to identify the compounds formed during alloying. The tribological properties were investigated to see the improvement obtained in this area. The results revealed a homogeneous composition for both samples, alloyed with Ca or with Mg, and the friction coefficient was reduced after the microalloying with almost 20%.

The Effects of Proprioceptive Training on Balance, Strength, Agility and Dribbling in Adolescent Male Soccer Players.

The aim of the study was to determine the effects of proprioceptive training (PT) on balance, strength, agility and dribbling in adolescent soccer players. In this research, we included an experimental (n = 48) and a control (n = 48) group (CG) with 14 years old players. The experimental group (EG) participated in an 8 week PT program, with four 30 min sessions per week. The experimental program included 12 bosu ball exercises to improve balance, stability and strength which were grouped into two subprograms: the first not using the soccer ball, the second subprogram using the soccer ball. The subprograms were implemented alternately during 16 proprioceptive training sessions, on two types of firm and foam surfaces. Pre- and post-tests included the static balance [Balance Error Scoring System (BESS)], vertical, horizontal, and lateral jumping, and the completion of agility ("arrowhead") and dribbling ("short dribbling") tests. Regarding the total BESS score, the CG has demonstrated progress between the pre- and the post-test, with 0.780 ± 0.895, fewer errors, while the EG had 5.828 ± 1.017 fewer errors. The difference between the two groups was of 5.148 fewer errors for the EG who had practiced the proposed program of proprioceptive training. The highest difference registered between the pre- and the post-test was at the test "single-leg forward jump with the right leg", with a result of 1.083 ± 0.459 cm for the CG and of 3.916 ± 0. 761 cm for the EG. Through the analysis of average differences between the pre- and the post-tests, we observe that, regarding the "Agility right side test", the EG has progressed with 0.382 s in comparison with the CG; regarding the "Agility left side test", the EG has progressed with 0.233 s compared to the CG; regarding the "Agility right and left side test", the EG has progressed with 0.196 s compared to the CG; in the "Short dribbling test", the EG has progressed with 0.174 s compared to the CG. The highest progress was made at the "Agility right side test", of 0.402 s for the EG, while the CG registered 0.120 s. Most of the results in all tests for both experimental groups show an effect size ranging from small to medium. The progress made by the experimental group in all tests was statistically significant, while in the control group the progress was mostly statistically insignificant for p < 0.05. The results suggest that a PT program performed at about 14 years of age could be successfully implemented in the training regime of soccer players to improve components of fitness along with dribbling skills. The results of the study revealed that sports training on the foam surfaces determined a superior progress of the development of proprioception compared to the increased training on the firm surfaces.

Predictors of Changes in Travel Behavior during the COVID-19 Pandemic: The Role of Tourists' Personalities.

This study investigates travel behavior and psychosocial factors that influence it during the COVID-19 pandemic. In a cross-sectional study, using an online survey, we examined changes in travel behavior and preferences after lifting travel restrictions, and how these changes were influenced by exposure to COVID-19, COVID-19 travel-related risk and severity, personality, fear of travel, coping, and self-efficacy appraisals in the Romanian population. Our results showed that participants traveled less in the pandemic year than the year before-especially group and foreign travel-yet more participants reported individual traveling in their home county during the pandemic period. Distinct types of exposure to COVID-19 risk, as well as cognitive and affective factors, were related to travel behavior and preferences. However, fun-seeking personality was the only major predictor of travel intention, while fear of travel was the only predictor of travel avoidance. Instead, people traveled more cautiously when they perceived more risk of infection at the destination, and had higher levels of fear of travel, but also a high sense of efficacy in controlling the infection and problem-solving capacity. The results suggest that specific information about COVID-19, coping mechanisms, fear of travel, and neuropsychological personality traits may affect travel behavior in the pandemic period.

Tonsillar lymphoma masquerading as obstructive sleep apnea - pediatric case report.

The commonest cause of head and neck malignancy in pediatric patients is lymphoma. A particular case is the tonsillar lymphoma. Even though unilateral tonsillar enlargement represents an ominous sign for neoplasia, clinical manifestations vary and are non-specific. Therefore, a delayed diagnosis is performed which compromises optimal therapy and hinders the prognosis. We present the case of a 5-year-old boy who was initially diagnosed with obstructive sleep apnea, without reported systemic complaints. Asymmetric tonsillar hypertrophy created the premises for performing a tonsillectomy to rule out malignancy. The pathological evaluation of the resected tonsils revealed a malignant non-Hodgkin's lymphoma, with immunophenotypic features consistent with sporadic type Burkitt lymphoma. The aim of this paper is to emphasize the importance of the histopathological examination and of the immunohistochemistry testing for the prompt and accurate diagnosis of all asymmetric tonsillar hypertrophy in children undergoing tonsillectomy. Furthermore, immunohistochemical diagnosis is vital for establishing a personalized multi-agent chemotherapy regimen, which dramatically improves the survival rate. We recommend histopathological evaluation in all children with asymmetric tonsillar hypertrophy undergoing tonsillectomy for various reasons. Needless to say, it is better to be cautious and exclude the presence of tonsillar lymphoma, than to confront with the severe consequences of misdiagnosis.

Energy use and recovery strategies within wastewater treatment and sludge handling at pulp and paper mills.

This paper presents an inclusive approach with focus on energy use and recovery in wastewater management, including wastewater treatment (WWT) and sludge handling. Process data from three Swedish mills and a mathematical model were used to evaluate seven sludge handling strategies. The results indicate that excess energy use in WWT processes counters the potential energy recovery in the sludge handling systems. Energy use in WWT processes is recommended to aim for sufficient effluent treatment, not for sludge reduction. Increased secondary sludge production is favourable from an energy point of view provided it is used as a substrate for heat, biogas or electricity production.