ABSTRACT
Polarization-selective diffractive in-line and off-axis lenses are recorded in azopolymer thin films using polarization holography. A simple, yet efficient, and to the best of our knowledge, new method is used to suppress the surface relief grating formation and to improve the polarization properties of the lenses. The in-line lenses are converging for right circularly polarized (RCP) light and diverging for left circularly polarized (LCP) light. Bifocal off-axis lenses are recorded by polarization multiplexing. By rotating the sample at 90° between the exposures, the two focal points of these lenses are located in orthogonal directions O x and O y, so we can refer to these novel lenses as 2D bifocal polarization holographic lenses. The light intensity in their focuses depends on the reconstructing light polarization. According to the recording scheme, they can either reach maximum intensities simultaneously (for LCP or RCP), or alternatively, one of them can be at maximum for LCP, while the other for RCP. These lenses may be used as polarization controllable optical switches, in the field of self-interference incoherent digital holography or for other photonics applications.
ABSTRACT
The dynamic speckle method (DSM) is an effective tool for the estimation of speed of processes. The speed distribution is encoded in a map built by statistical pointwise processing of time-correlated speckle patterns. For industrial inspection, the outdoor noisy measurement is required. The paper analyzes the efficiency of the DSM in the presence of environmental noise as phase fluctuations due to the lack of vibration isolation and shot noise due to ambient light. The usage of normalized estimates for the case of non-uniform laser illumination is studied. The feasibility of the outdoor measurement has been proven by numerical simulations of noisy image capture and real experiments with test objects. Good agreement has been demonstrated in both the simulation and experiment between the ground truth map and the maps extracted from noisy data.
ABSTRACT
This feature issue is a continuation of a tradition to follow the conclusion of the Optica Topical Meeting on Digital Holography and 3D Imaging (DH+3D). It addresses current research topics in digital holography and 3D imaging that are also in line with the topics of Applied Optics and Journal of the Optical Society of America A.
ABSTRACT
This feature issue is a continuation of a tradition to follow the conclusion of the Optica Topical Meeting on Digital Holography and 3D Imaging (DH+3D). It addresses current research topics in digital holography and 3D imaging that are also in line with the topics of Applied Optics and Journal of the Optical Society of America A.
ABSTRACT
We report on wavelength-multiplexed digital holographic imaging based on simultaneous Bragg diffraction of wideband light by several ultrasound waves of different frequencies in crystalline media. This technique is easy to implement, avoids spectral scanning, and is applicable in various digital holography schemes. It also enables single-shot acquisition of a few spectral fringe patterns by a single monochrome sensor and wavelength demultiplexing of the resulting interferogram. We have assembled a Mach-Zehnder interferometer with an acousto-optical tunable filter operating in the multifrequency mode and have validated the proposed technique by dual-, three-, and four-wavelength quantitative phase imaging of the test samples.
ABSTRACT
This feature issue is a continuation of a tradition, since 2007, to follow the conclusion of the OSA Topical Meeting on Digital Holography and 3D Imaging (DH+3D). It addresses current research topics in digital holography (DH) and 3D imaging that are also in line with the topics of Applied Optics (AO) and the Journal of the Optical Society of America A (JOSA A).
ABSTRACT
Photoinduced supramolecular chiral structures in azo materials have been extensively studied for the development of all-optical switches and because of their influence on the properties of certain types of polarization holographic gratings. Here, we investigate chiral structures induced by irradiation with elliptically polarized light in thin films of four azopolymers denoted as PAZO, P1, P1-2, which are amorphous, and P2, which is liquid crystalline. Their formation is characterized in real time by the kinetics of azimuth rotation. The influence of the irradiation wavelength and intensity is also analyzed. The largest azimuth rotation per unit thickness is achieved in PAZO (33°/µm) and P1-2 (25°/µm). Reversibility of the chiral structures is demonstrated by a tenfold change in the direction of rotation. Our results also indicate that chiral structures formation occurs significantly faster than the induction of linear birefringence.
ABSTRACT
Statistical processing of speckle data enables observation of the speed of processes. In intensity-based pointwise dynamic speckle analysis, a map related to speed's spatial distribution is extracted from a sequence of speckle patterns formed on an object under coherent light. Monitoring of time evolution of a process needs storage, transfer, and processing of a large number of images. We have proposed lossy compression of these images using JPEG and JPEG2000 formats. We have compared the maps computed from noncompressed and decompressed synthetic and experimental images, and we have proven that both compression formats can be applied in the dynamic speckle analysis.
ABSTRACT
This feature issue is a continuation of a tradition, since 2007, to follow the conclusion of the OSA Topical Meeting on Digital Holography and 3D Imaging (DH+3D). It addresses current research topics in digital holography (DH) and 3D imaging that are also in line with the topics of Applied Optics (AO) and the Journal of the Optical Society of America A (JOSA A).
ABSTRACT
The performance of direct and unwrapped phase retrieval, which combines digital holography with the transport of intensity, is examined in detail in this paper. In this technique, digital holography is used to numerically reconstruct the intensities at different planes around the image plane, and phase retrieval is achieved by the transport of intensity. Digital holography with transport of intensity is examined for inline and off-axis geometries. The effect of twin images in the inline case is evaluated. Phase-shifting digital holography with transport of intensity is introduced. The performance of digital holography with transport of intensity is compared with traditional off-axis single- and dual-wavelength techniques, which employ standard phase unwrapping algorithms. Simulations and experiments are performed to determine and compare the accuracy of phase retrieval through a mean-squared-error figure of merit as well as the computational speeds of the various methods.
ABSTRACT
Raw data compression is mandatory for monitoring of processes by dynamic speckle analysis when two-dimensional activity maps are built by pointwise statistical processing of correlated speckle patterns formed on the surface of diffusely reflecting objects under laser illumination. Coarse quantization of speckle patterns enables storage and transfer of a huge amount of images, but it may be inefficient at spatially varying speckle statistics, such as for patterns recorded at non-uniform illumination or reflectivity. We prove efficacy of coarse quantization of the raw speckle data with varying statistics for a normalized algorithm by simulation and a polymer drop drying experiment. Both uniform and non-uniform quantization are proposed for treating such data. Decreasing the bit depth from 8 to 3 is possible without worsening the quality of the activity map.
ABSTRACT
This feature issue of JOSA A and Applied Optics is dedicated to the fourteenth OSA Topical Meeting "Digital Holography and 3D Imaging" held 22-26 June 2020 in a virtual meeting. The conference, taking place every year, is a focal point for global technical interchange in the field of digital holography and 3D imaging, providing premier opportunities for people working in the field to present their new advances in research and development. Papers presented at the meeting highlight current research in digital holography and three-dimensional imaging, including interferometry, phase microscopy, phase retrieval, novel holographic processes, 3D and novel holographic displays, integral imaging, computer-generated holograms, compressive holography, 3D holographic display, AR display, full-field tomography, specific image and signal processing, and holography with various light sources, including coherent to incoherent and x-ray to terahertz waves. Techniques of digital holography and of 3D imaging have numerous applications, such as the state-of-the-art technological developments that are currently underway and have also stimulated further novel applications of digital holography and 3D imaging in biomedicine, deep learning, and scientific and industrial metrologies.
ABSTRACT
This feature issue of JOSA A and Applied Optics is dedicated to the fourteenth OSA Topical Meeting "Digital Holography and 3D Imaging" held 22-26 June 2020 in a virtual meeting. The conference, taking place every year, is a focal point for global technical interchange in the field of digital holography and 3D imaging, providing premier opportunities for people working in the field to present their new advances in research and development. Papers presented at the meeting highlight current research in digital holography and three-dimensional imaging, including interferometry, phase microscopy, phase retrieval, novel holographic processes, 3D and novel holographic displays, integral imaging, computer-generated holograms, compressive holography, 3D holographic display, AR display, full-field tomography, specific image and signal processing, and holography with various light sources, including coherent to incoherent and x-ray to terahertz waves. Techniques of digital holography and of 3D imaging have numerous applications, such as the state-of-the-art technological developments that are currently underway and stimulate further novel applications of digital holography and 3D imaging in biomedicine, deep learning, and scientific and industrial metrologies.
ABSTRACT
Analysis of dynamic speckle formed on the surface of diffusely reflecting objects under laser illumination is a non-contact method for inspection of speed of processes. The paper deals with intensity-based implementation of the method that relies on statistical processing of correlated in time sequences of speckle images. A two-dimensional activity map is built for each sequence to visualize regions of different speed on the object surface at a given instant. A great number of images is required to track a process in time. We propose data compression by coarse quantization of the raw speckle data. Efficacy of quantization is analyzed by simulation and experiment for low- and high-contrast speckle patterns with bell-shaped and long-tailed distributions of intensity, respectively. Non-uniform quantization is proposed for long-tailed speckle intensity distributions. Decreasing the bit depth from 8 to 4 causes no change in the probability density function of the activity estimate.
ABSTRACT
A new phase-added stereogram algorithm for accelerated computation of holograms from a point cloud model is proposed. The algorithm relies on the hologram segmentation, sampling of directional information, and usage of the fast Fourier transform with a finer grid in the spatial frequency domain than is provided by the segment size. The algorithm gives improved quality of reconstruction due to new phase compensation introduced in the segment fringe patterns. The result is finer beam steering leading to high peak intensity and a large peak signal-to-noise ratio in reconstruction. The feasibility of the algorithm is checked by the generation of 3D contents for a color wavefront printer.
ABSTRACT
The holographic wavefront printer decodes the wavefront coming from a three-dimensional object from a computer generated hologram displayed on a spatial light modulator. By recording this wavefront as an analog volume hologram this printing method is highly suitable for realistic color 3D imaging. We propose in the paper spatial partitioning of the spatial light modulator to perform mosaic delivery of exposures at primary colors for seamless reconstruction of a white light viewable color hologram. The method is verified for a 3 × 3 color partitioning scheme by a wavefront printer with demagnification of the light beam diffracted from the modulator.
ABSTRACT
Successful commercialization of holographic printers based on holographic stereograms requires a tool for their numerical replaying and quality assessment before the time-consuming and expensive process of holographic recording. A holographic stereogram encodes 2D images of a 3D scene that are incoherently captured from multiple perspectives and rearranged before recording. This study presents a simulator which builds a full parallax and full color white light viewable holographic stereogram from the perspective images captured by a virtual recentering camera with its further numerical reconstruction for any viewer location. By tracking all steps from acquisition to recording, the simulator allows for analysis of radial distortions caused by the optical elements used at the recording stage. Numerical experiments conducted at increasing degree of pincushion distortion proved its insignificant influence on the reconstructed images in all practical cases by using a peak signal-to-noise ratio and the structural similarity as an image quality metrics.
ABSTRACT
Correlation-based pointwise processing of dynamic speckle patterns is proposed for spatial characterization of activity in a sample. The result is a set of 2D activity maps of the estimates of temporal correlation, or structure functions, at increasing time lags. Pointwise computation provides spatial resolution, limited by the pixel period of the optical sensor used for acquisition of the speckle patterns. Pointwise normalization of the estimates solves the problem with the nonuniform illumination and varying reflectivity across the sample. The high contrast detailed activity maps obtained from processing of synthetic and experimental speckle patterns confirms efficiency of the proposed approach.
Subject(s)
Image Processing, Computer-Assisted , Optical Phenomena , Algorithms , Light , Surface PropertiesABSTRACT
Three approaches for visualization of transparent micro-objects from holographic data using phase-only SLMs are described. The objects are silicon micro-lenses captured in the near infrared by means of digital holographic microscopy and a simulated weakly refracting 3D object with size in the micrometer range. In the first method, profilometric/tomographic data are retrieved from captured holograms and converted into a 3D point cloud which allows for computer generation of multi-view phase holograms using Rayleigh-Sommerfeld formulation. In the second method, the microlens is computationally placed in front of a textured object to simulate the image of the textured data as seen through the lens. In the third method, direct optical reconstruction of the micrometer object through a digital lens by modifying the phase with the Gerchberg-Saxton algorithm is achieved.
ABSTRACT
We describe a plane-wave-expansion approach for calculation of the fringe pattern in transmission and reflection for a Gaussian monochromatic beam. Both positive and negative incidence, at which the incident light beam undergoes multiple reflections within the wedge in direction of increasing or decreasing wedge thickness respectively, are analyzed. It is shown that the two opposite incidences of the light beam are described by the same mathematical expressions; i.e., the transmitted/reflected fringe pattern at positive incidence is a continuation of the pattern at negative incidence at some distance from the wedge. Numerical simulations are made for a high-reflectivity-coating air-gap Fizeau interferential wedge with apex angle of 5-100 microrad and thickness of 5-500 microm as a useful optical element in laser resonator design. Experimental verification is also provided.
