The availability and content of dental instrument manufacturers' decontamination information.

OBJECTIVE: The effective decontamination of reusable dental instruments is essential to reduce the risks from onward transmission of infectious diseases. There are therefore a number of legislative requirements placed upon manufacturers of medical devices (which includes dental instruments) to provide validated methods for the reprocessing of such devices. The aim of this study was to determine the availability and content of manufacturer's instructions for the reprocessing of reusable dental instruments. MATERIALS AND METHODS: A database of reusable dental instruments with details of their manufacturers was collated from information received from three dental hospitals. A questionnaire was sent to all the manufacturers requesting information about the reprocessing instructions for their products. The response from each manufacturer was assessed for the quality of the information and compliance with the British, European and International Standard, BS EN ISO 17664 (2004). RESULTS: The database from the three dental hospitals included over 800 items supplied by 54 different manufacturers/suppliers. Forty protocols were available for assessing compliance with BS EN ISO 17664 (2004). These protocols accounted for 25 (46%) manufacturers covering 300 devices. The majority (90%) of the returned questionnaires did not comply with the required standard and provided insufficient information to allow for the effective decontamination of the instruments. CONCLUSIONS: Manufacturers of medical devices are legally required to supply the user with validated instructions to enable effective decontamination of these devices. The information must be in a format as specified in BS EN ISO 17664 (2004). The information obtained in this survey demonstrated that the manufacturers' instructions fall short of the required regulatory requirements. The absence of such instructions increases the risk of cross-infection arising from inadequate cleaning, decontamination and sterilisation.

A comparison of two radiographic assessment protocols for patients with periodontal disease.

OBJECTIVE: Radiographic assessment of patients with generalised severe periodontitis may be undertaken with a panoramic view and supplementary periapicals. The purpose of this study was to estimate the effective radiation dose from this form of radiographic assessment, and to compare it with an estimate of the dose from a series of periapicals of all the affected teeth. DESIGN: Cross-sectional observational study. SETTING: Departments of Periodontology and Radiology, Glasgow Dental Hospital and School. METHOD: Fifty consecutive patients [were recruited] with sufficiently widespread advanced periodontitis to require at least seven periapical radiographs. [Following new local guidelines, a panoramic view was taken.] The adequacy of the image of every affected tooth and the number of supplementary periapicals required was determined by a panel of four examiners who also calculated the number of periapicals which would have been taken if panoramic radiography had not been available. An effective dose of 0.001 mSv for one periapical and 0.007 mSv for a panoramic view was assumed. RESULTS: The panoramic-plus-periapicals approach delivered an estimated additional effective dose to 86% of patients, in the order of 0.001-0.007 mSv. CONCLUSIONS: Within the parameters of this investigation, the anticipated effective radiation dose from a series of periapical radiographs of all selected teeth would, for the great majority of patients, have been less than the dose from a panoramic-plus-periapicals approach.

Toward development of neem-based repellents against the Scottish Highland biting midge Culicoides impunctatus.

Oil of neem, from the tree Azadirachta indica A. Juss (Meliaceae), was evaluated for repellent and antifeedant activity against Culicoides biting midges (Diptera: Ceratopogonidae), by three complementary methods with serial dilutions. Electroantennograms revealed the sensitivity of Culicoides nubeculosus (Meigen) females to neem > or = 0.10%. Culicoides impunctatus Goetghebuer females were repelled by > or = 1% in a Y-tube olfactometer, Using a membrane feeder for wild-caught parous females of C. impunctatus, the proportion blood-feeding was significantly reduced by topical applications of neem oil > or = 0.10% concentrations, with blood-feeding completely prevented by > or =1%. On the basis of these response data, we developed 2% neem-based formulations for personal protection against biting midges.

The antimitotic effect of the neem terpenoid azadirachtin on cultured insect cells.

When cultured insect cells (Sf9) were grown in the presence of 5 x 10(-6) M azadirachtin, there was a rapid increase in the mitotic index, with the appearance of many aberrant mitotic figures. Flow cytometry established that cells accumulated in the G2/M phase of the cell cycle, and that the effect was concentration-dependent. At 10(-8) M a period of 20 h was necessary to raise the proportion in G2/M to 42% above the control values, but at 5 x 10(-6) M more than 90% of the cells were in this phase. Azadirachtin had the same effect on C6/36 mosquito cells, but failed to affect L929 murine fibroblast cells even at a concentration of 10(-4) M over 72 h. Experiments with colchcine and taxol showed similarities of action between azadirachtin and colchicine, and azadirachtin was apparently able to displace colchicine-fluorescein from binding-sites in living insect cells. Another similarity between azdirachtin and colchicine was that both phytochemicals prevented the polymerisatrion in vitro of mammalian tubulin, although the azadirachtin was much less effective.

The effect of dentine on fluorescence measurements of enamel lesions in vitro.

This study aimed to determine the contribution of the underlying dentine and the enamel-dentine junction to measurements of mineral loss from enamel recorded using quantitative light fluorescence (QLF). Sixteen square blocks (5 x 5 mm) were cut from the labial surfaces of extracted bovine incisor teeth. A dental drill was used to remove dentine and the enamel-dentine junction from half of each specimen. All specimens were embedded in epoxy resin and ground to produce a smooth, flat enamel surface. Half of the enamel surface of the block, perpendicular to where the dentine had been removed, was demineralised for 72 h prior to undertaking QLF measurements from the enamel surface to compare fluorescence loss from different areas of the block. QLF readings taken from lesions with no underlying dentine or enamel-dentine junction were very similar to readings from lesions with underlying dentine. A comparison of the two data sets demonstrated a linear relationship with a gradient of 0.95 and a y intercept of -1.24 (r(2) = 0.936). From these data, the underlying dentine and enamel-dentine junction did not influence mineral loss in enamel measured using QLF.

Biologically active recombinant human progastrin(6-80) contains a tightly bound calcium ion.

Evidence is accumulating that gastrin precursors may act as growth factors for the colonic mucosa in vivo. The aims of this study were to prepare recombinant human progastrin(6-80) and to investigate its structure and biological activities in vitro. Human progastrin(6-80) was expressed in Escherichia coli as a glutathione S-transferase fusion protein. After thrombin cleavage progastrin(6-80) was purified by reverse phase high pressure liquid chromatography and characterized by radioimmunoassay, amino acid sequencing, and mass spectrometry. Assays for metal ions by atomic emission spectroscopy revealed the presence of a single tightly bound calcium ion. Progastrin(6-80) at concentrations in the pm to nm range stimulated proliferation of the conditionally transformed mouse colon cell line YAMC. The observations that progastrin(6-80) did not bind to either the cholecystokinin (CCK)-A or the gastrin/CCK-B receptor expressed in COS cells and that antagonists selective for either receptor did not reverse the proliferative effects of progastrin(6-80) suggested that progastrin(6-80) stimulated proliferation independently of either the CCK-A or the gastrin/CCK-B receptor. We conclude that recombinant human progastrin(6-80) is biologically active and contains a single calcium ion. With the exception of the well known zinc-dependent polymerization of insulin and proinsulin, this is the first report of selective, high affinity binding of metal ions to a prohormone.

Preliminary investigation of a novel carbon dioxide laser for applications in dentistry.

BACKGROUND AND OBJECTIVE: A novel pulsed CO(2) laser was examined for its ability to ablate hard dental tissues. STUDY DESIGN/MATERIALS AND METHODS: Lased human enamel surfaces were viewed using light and scanning electron microscopy for evidence of adverse structural changes. In vitro shear bond strength tests were conducted on composite resin bonded to lased enamel surfaces and compared with conventionally prepared specimens. A thermal camera was used to monitor temperature changes during cavity preparation in tooth slabs to assess likely changes to the dental pulp. RESULTS: No charring or surface cracks were observed on lased enamel surfaces using both microscopic techniques. Bonding of the lased enamel surfaces to composite resin was not significantly different from the acid-etched control group. For cavities with a remaining dentine thickness of less than 1 mm, the temperature rise was less than 6 degrees C. CONCLUSION: A novel pulsed CO(2) laser shows promise for cutting cavities in teeth.

The effect of wavelength, bandwidth, and probe design and position on assessing the vitality of anterior teeth with laser Doppler flowmetry.

OBJECTIVES: To investigate the effect of four variables: wavelength (633 nm and 780 nm), bandwidth filter (3 kHz, 15 kHz, 22 kHz), probe fibre separation (250 microns) and 500 microns) and distance of the probe from the gingival margin (2-3 mm and 4-5 mm) when assessing the vitality of anterior teeth with a laser Doppler flowmetry system. DESIGN: Split-mouth cohort clinical trial. SETTING: Childrens dental clinic, Glasgow Dental Hospital and School. SAMPLE AND METHODS: Sample included 11 non-vital maxillary incisors with necrotic pulps in 10 patients (mean age 12.25 years old). Recordings were taken from the non-vital tooth and from a vital maxillary incisor from the same patient, using all 24 combinations of the recording variables listed above. The vital/non-vital ratios of the signals from the 11 pairs of teeth were calculated and discriminant analysis applied to the data. RESULTS: Of the variables investigated, the combination of a 633 nm laser source with a 3 kHz bandwidth filter using a probe with a 500 microns fibre separation placed 2-3 mm from the gingival margin was the most reliable, with 10 out of a possible 11 true positives for pulpal necrosis, no false positives, and one equivocal diagnosis, and was the only combination that recorded a smaller blood flow from the non-vital tooth compared with the vital control tooth for all 11 pairs of teeth investigated. CONCLUSIONS: It was concluded, therefore, that laser Doppler flowmetry can be of use in assessing the vitality of anterior teeth and that this is the preferred combination of recording variables for further investigations.

Dental materials: 1997 literature review.

This review of the published literature on dental materials for the year 1997 has been compiled by the Dental Materials Panel of UK. It continues a series of annual reviews started in 1973. Emphasis has been placed upon publications, which report upon the materials science or clinical performance of the materials. The review has been divided by accepted materials classifications (fissure sealants, glass polyalkenoate cements, dentine bonding, dental amalgam, endodontic materials, casting alloys, ceramometallic restorations and resin-bonded bridges, ceramics, denture base resins and soft lining materials, impression materials, dental implant materials, orthodontic materials, biomechanics and image processing, resin composites, and casting investment materials and waxes). Three hundred and thirty three articles have been reviewed.

The effect of saliva on enamel and dentine erosion.

The present study aims to assess the ability of saliva, both in vitro and in situ, to prevent surface mineral loss from enamel and dentine when exposed to an erosive challenge. Fifteen groups of four varnished thin tooth sections were stored in saliva collected from individuals taking part in the in situ study and a further eight groups, each containing four sections, were stored in deionised water. In vitro, sections were stored in saliva or water for 14 days. In addition, fifteen subjects each wore an appliance with four varnished sections. Appliances with sections were worn for 14 days. All sections were exposed to 25 ml of erosion solution for 5 min twice daily. Microradiography and image analysis of the recovered sections demonstrated significant protection of surface mineral loss from enamel and dentine by saliva in vitro and in situ compared with deionised water (p < 0.05). Significantly less mineral loss (p < 0.05) was observed for enamel and dentine stored in situ compared with storage in saliva in vitro. Generalised linear modelling demonstrated both the subject and protocol had significant effect on mineral loss. A weak positive correlation (r = 0.64) was noted when in situ and in vitro mineral loss from enamel were compared, demonstrating greater reactivity of the in vitro enamel specimens to the erosion challenge. The dentine data did not show any linear correlation. Saliva protected against mineral loss by erosion and, for enamel, in vitro results demonstrated a weak positive correlation with in situ results.

Multinational outbreak of Salmonella enterica serotype Newport infections due to contaminated alfalfa sprouts.

CONTEXT: In December 1995, reported Salmonella enterica serotype Newport (SN) infections increased sharply in Oregon and British Columbia but not elsewhere in North America. Similar unexplained increases had been noted in 6 other states in the fall of 1995. OBJECTIVE: To determine the source of the outbreak(s). DESIGN: Case-control studies, environmental investigations, bacterial subtyping, and surveillance information review. SETTINGS: Oregon and British Columbia communities (winter 1995-1996) and Georgia, Oklahoma, Pennsylvania, Vermont, Virginia, and West Virginia (fall 1995). PARTICIPANTS: Oregon and British Columbia residents with culture-confirmed SN infections and onset from December 1, 1995, through February 29, 1996, and healthy community controls. MAIN OUTCOME MEASURES: Odds ratio (OR) of illness associated with exposures; distribution patterns and culture of alfalfa seeds and sprouts; subtyping of SN isolates. RESULTS: We identified 133 cases in Oregon and British Columbia; 124 (93%) occurred in patients older than 18 years; 87 (65%) were female. Case patients were more likely than community control subjects to report having eaten alfalfa sprouts in the 5 days preceding illness (41% [17/41] vs 4% [3/75]; OR, 17.0; 95% confidence interval, 4.3-96.0). Case isolates shared a distinctive pulsed-field gel electrophoresis (PFGE) pattern. The SN was grown from seeds and alfalfa sprouts. The distribution of 1 seed lot to multiple growers corresponded to the distribution of cases. Distribution of a second seed lot from the same European wholesaler corresponded to the location of the fall outbreak, which was characterized by a similar demographic profile. The PFGE pattern of fall outbreak isolates and confiscated sprouts and seeds was indistinguishable from the Oregon and British Columbia outbreak and differed from background isolates. CONCLUSIONS: The SN-contaminated alfalfa seeds were distributed to multiple growers across North America in 1995 and resulted in a protracted international outbreak scattered over many months. Current sprouting methods are inadequate to protect consumers from such events. Alfalfa sprouts may be an elusive but important vehicle for salmonellosis and other enteric infections.

A comparison of laser Doppler flowmetry with other methods of assessing the vitality of traumatised anterior teeth.

Laser Doppler flowmetry is a non-invasive electrooptical technique which allows the semi-quantitative recording of pulpal blood flow. This study aimed to determine the reliability (measured as the sensitivity and specificity) of laser Doppler flowmetry as a method of assessing the vitality of traumatised anterior teeth, and to compare it with standard pulpal diagnostic tests. Recordings of pulpal blood flow were taken from 67 non-vital anterior teeth (55 patients), where the pulpal status was confirmed by pulpectomy. For comparison, recordings were also taken from 84 vital anterior teeth (84 patients). Analysis of the recordings allowed diagnostic criteria to be developed which gave the technique a sensitivity and specificity of 1.0 for this sample. None of the other standard pulpal diagnostic methods tested was as reliable. This was usually due to low sensitivities, which ranged between 0.92 for sensibility testing with ethyl chloride down to 0.36 for periapical radiolucency and 0.16 for a history of pain. Laser Doppler flowmetry was found to be a reliable method of assessing the pulpal status of traumatised anterior teeth, although it is technique-sensitive and time-consuming to use.

Efficacy of variable-angle screws in transpedicular fixation.

The purpose of this study was to evaluate the usefulness and efficacy of variable-angle screws in transpedicular fixation. Sixteen patients (10 men and six women, age range 44-73 years) underwent a posterior transpedicular fixation procedure in which variable-angle screws were placed at two or more levels. Four patients experienced spinal instability secondary to trauma, 10 patients suffered from degenerative spondylosis requiring fusion, and two patients were treated for spinal metastatic disease. All patients underwent posterior transverse process fusion in which autologous bone was used. In total, 37 vertebral levels were fixed with variable-angle screws placed at 22 levels. Postoperatively all patients were fitted with an external orthosis that was worn for 12 weeks. Serial postoperative plain x-ray films were obtained in all cases. Follow-up periods ranged from 11 to 24 months. Based on clinical and radiographic data, solid fusion was achieved in 14 of 16 patients. There were two early disconnections of the rod/screw connectors, which were related to errors in technique. With the exception of these disconnections, there were no cases of construct failure. There were no wound infections, and no patient experienced a decline in neurological function as compared with preoperative levels. Both instrumentation systems were easy to use, and the flexibility in trajectory allowed for quicker screw placement and decreased operating room time. Variable-angle pedicle screws are a safe, useful adjunct to transpedicular fixation, particularly in multisegment fixation and in spines with abnormal alignment.

Dental materials: 1996 literature review. Part 2.

This critical review of the published literature on dental materials for the year 1996 has been compiled by the Dental Materials Panel of the UK. It continues the series of annual reviews started in 1973 and published in the Journal of Dentistry. Emphasis has been placed upon publications which report upon the materials science or clinical performance of the materials. The review has been divided by accepted materials classifications (fissure sealants, glass polyalkenoate cements, dentine bonding, dental amalgam, endodontic materials, casting alloys, resin-bonded bridges and ceramo-metallic restorations, ceramics, denture base resins and soft lining materials, impression materials, implants materials, orthodontic materials, biomechanics and image processing, resin composites and casting investment materials and waxes). Three hundred and thirteen articles have been reviewed.

Dental materials: 1996 literature review.

This critical review of the published literature on dental materials for the year 1996 has been compiled by the Dental Materials Panel of the UK. It continues the series of annual reviews started in 1973 and published in the Journal of Dentistry. Emphasis has been placed upon publications which report upon the materials science or clinical performance of the materials. The review has been divided by accepted materials classifications (fissure sealants, glass polyalkenoate cements, dentine bonding, dental amalgam, endodontic materials, casting alloys, resin-bonded bridges and ceramo-metallic restorations, ceramics, denture base resins and soft lining materials, impression materials, implants materials, orthodontic materials, biomechanics and image processing, resin composites and casting investment materials and waxes). Three hundred and thirteen articles have been reviewed.

Determination of plaque pH changes within the trough of an in situ appliance used to study mineral changes in early carious lesions.

Plaque pH was measured using a glass combination pH microelectrode of plaque deposits lining the trough of an intra-oral appliance which contained single sections of human teeth with artificial enamel lesions. Plaque exposure to a 10% sucrose solution produced significantly lower plaque pH levels than a solution of sorbitol gum extract. The subsequent flow of saliva over the plaque/pH electrode interface resulted in a significant and rapid increase in pH. Repeat experiments, using deionised water instead of saliva, demonstrated no increase in pH at the plaque/electrode interface. This system may provide a convenient method of producing plaque suitable for repeated pH analysis in intimate association with artificial enamel lesions. This may permit further study of the relationship between plaque acidogenicity, salivary buffering capacity and mineral change within the incipient enamel lesion.

Application of transverse microradiography for measurement of mineral loss by acid erosion.

This paper describes a novel application of transverse microradiography for the detection and quantification of mineral loss due to acid erosion in thin tooth sections. Sixty-four specimens were randomly divided into eight equal-sized groups and exposed to an orthophosphoric-acid-based erosive fluid (pH = 3) for 0, 0.25, 0.5, 1, 2, 5, 12, or 24 hrs. We made microdensitometric scans separately across both enamel and dentin to derive data for the total mineral loss and the minimum mineral content within the eroded area. We then analyzed specimens using a profilometer to determine (1) the area above a plot of penetration depth against distance and (2) the maximum depth of penetration. Correlation coefficients for comparisons between microradiographic and profilometric data for both enamel and dentin specimens varied between 0.87 and 0.96. Two-sample t tests demonstrated that the microradiographic technique could detect early erosion, i.e., discriminate between erosion times of less than 1 hr. It was concluded that this application of transverse microradiography was a useful and acceptable method for the measurement of early mineral loss in vitro, occurring as a result of acid erosion.