Improved hydrogen gas production in microbial electrolysis cells using inexpensive recycled carbon fibre fabrics.

Growing energy demands of wastewater treatment have made it vital for water companies to develop less energy intensive processes for treating wastewater if net zero emissions are to be achieved by 2050. Microbial electrolysis cells (MECs) have the potential to do this by treating water and producing renewable hydrogen gas as a product, but capital and operational costs have slowed their deployment. By using recycled carbon fibre mats, commercially viable MECs can brought closer to reality, where recycled carbon fibre anode MECs treating real wastewater (normalised ~3100 L d-1) were producing 66.77 L H2 d-1 while graphite felt anode MECs produced 3.65 L H2 d-1 per 1 m3 reactor, anodes costing £5.53 m-2 and £88.36 m-2 respectively, resulting in a total anode cost saving of 93%. This could incentivise the development of larger pilot systems, opening the door for generating greater value and a more sustainable wastewater treatment industry.

Rapid Detection of Proliferative Bacteria by Electrical Stimulation.

Detecting live bacteria is an important task for antimicrobial susceptibility testing (AST) in the medical sector and for quality-monitoring in biological industries. Current methods for live-bacteria detection suffer limitations in speed or sensitivity. In a recent paper, we reported that electrical response dynamics in membrane potential enable single-cell rapid detection of live bacteria. The electrical response can be observed within a minute after electrical stimulation. Thus, it has potential in accelerating AST and the monitoring of biological samples. This method also enables experiments for biophysical and microbiological investigations into bacterial electrophysiology. With the hope that more researchers, scientists and engineers will use electrical stimulation for their assays, here we detail each step of the electrical stimulation experiment.

Electrically induced bacterial membrane-potential dynamics correspond to cellular proliferation capacity.

Membrane-potential dynamics mediate bacterial electrical signaling at both intra- and intercellular levels. Membrane potential is also central to cellular proliferation. It is unclear whether the cellular response to external electrical stimuli is influenced by the cellular proliferative capacity. A new strategy enabling electrical stimulation of bacteria with simultaneous monitoring of single-cell membrane-potential dynamics would allow bridging this knowledge gap and further extend electrophysiological studies into the field of microbiology. Here we report that an identical electrical stimulus can cause opposite polarization dynamics depending on cellular proliferation capacity. This was demonstrated using two model organisms, namely Bacillus subtilis and Escherichia coli, and by developing an apparatus enabling exogenous electrical stimulation and single-cell time-lapse microscopy. Using this bespoke apparatus, we show that a 2.5-second electrical stimulation causes hyperpolarization in unperturbed cells. Measurements of intracellular K+ and the deletion of the K+ channel suggested that the hyperpolarization response is caused by the K+ efflux through the channel. When cells are preexposed to 400 ± 8 nm wavelength light, the same electrical stimulation depolarizes cells instead of causing hyperpolarization. A mathematical model extended from the FitzHugh-Nagumo neuron model suggested that the opposite response dynamics are due to the shift in resting membrane potential. As predicted by the model, electrical stimulation only induced depolarization when cells are treated with antibiotics, protonophore, or alcohol. Therefore, electrically induced membrane-potential dynamics offer a reliable approach for rapid detection of proliferative bacteria and determination of their sensitivity to antimicrobial agents at the single-cell level.

Segregation of the Anodic Microbial Communities in a Microbial Fuel Cell Cascade.

Metabolic interactions within microbial communities are essential for the efficient degradation of complex organic compounds, and underpin natural phenomena driven by microorganisms, such as the recycling of carbon-, nitrogen-, and sulfur-containing molecules. These metabolic interactions ultimately determine the function, activity and stability of the community, and therefore their understanding would be essential to steer processes where microbial communities are involved. This is exploited in the design of microbial fuel cells (MFCs), bioelectrochemical devices that convert the chemical energy present in substrates into electrical energy through the metabolic activity of microorganisms, either single species or communities. In this work, we analyzed the evolution of the microbial community structure in a cascade of MFCs inoculated with an anaerobic microbial community and continuously fed with a complex medium. The analysis of the composition of the anodic communities revealed the establishment of different communities in the anodes of the hydraulically connected MFCs, with a decrease in the abundance of fermentative taxa and a concurrent increase in respiratory taxa along the cascade. The analysis of the metabolites in the anodic suspension showed a metabolic shift between the first and last MFC, confirming the segregation of the anodic communities. Those results suggest a metabolic interaction mechanism between the predominant fermentative bacteria at the first stages of the cascade and the anaerobic respiratory electrogenic population in the latter stages, which is reflected in the observed increase in power output. We show that our experimental system represents an ideal platform for optimization of processes where the degradation of complex substrates is involved, as well as a potential tool for the study of metabolic interactions in complex microbial communities.

Intrinsic activation: the relationship between biomass inorganic content and porosity formation during pyrolysis.

The utility of pyrolytic carbons is closely related to their porosity and surface area, there is a clear benefit to the development of biomass pyrolysis processes which produce highly porous carbons. The results presented in this work demonstrate that by using biomass precursors with high inorganic content along with specified process conditions, carbons can be consistently produced with specific surface areas between 900 and 1600 m(2)/g. Results from 12 different source materials show that the formation of increased porosity in pyrolytic carbons is strongly associated with the presence of inorganic elements in the precursors including: magnesium, potassium and sulfur. It was found that pyrolysis of macro-algae can produce especially high specific surface area carbons (mean: 1500 m(2)/g), without externally applied activating agents. Using cheap readily available agricultural residues such as oilseed rape straw, pyrolytic carbons can be produced with specific surface areas of around 950 m(2)/g.

Anodic microbial community diversity as a predictor of the power output of microbial fuel cells.

The relationship between the diversity of mixed-species microbial consortia and their electrogenic potential in the anodes of microbial fuel cells was examined using different diversity measures as predictors. Identical microbial fuel cells were sampled at multiple time-points. Biofilm and suspension communities were analysed by denaturing gradient gel electrophoresis to calculate the number and relative abundance of species. Shannon and Simpson indices and richness were examined for association with power using bivariate and multiple linear regression, with biofilm DNA as an additional variable. In simple bivariate regressions, the correlation of Shannon diversity of the biofilm and power is stronger (r=0.65, p=0.001) than between power and richness (r=0.39, p=0.076), or between power and the Simpson index (r=0.5, p=0.018). Using Shannon diversity and biofilm DNA as predictors of power, a regression model can be constructed (r=0.73, p<0.001). Ecological parameters such as the Shannon index are predictive of the electrogenic potential of microbial communities.

Variation in the morphology of Bacillus mycoides due to applied force and substrate structure.

Response to mechanical force is a well characterised phenomenon in eukaryotic organisms, helping to organise multicellular structures. Mechanotactic responses have only rarely been observed in prokaryotic taxa. This work reports on a morphological change due to variations in applied force and surface structure by Bacillus mycoides Flügge. B. mycoides is a ubiquitous soil organism well known among microbiologists for its characteristic spreading colony morphology. An apparent mechanotactic response is elicited by physical deformation of the gel media on which B.mycoides is growing, including applied forces of compression or tension. Variations in the surface such as curvature produced by casting the agar gel in the presence of curved objects also elicited the change. The morphological change in B.mycoides colonies associated with the application of force manifests as a pattern of parallel rhizoid filaments perpendicular to compressing force and parallel to stretching force in the agar medium. The phenomenon is most clearly demonstrated by reversible changes in the orientation of B. mycoides filaments during time-lapse microscopy.

A microfluidic system for long-term time-lapse microscopy studies of mycobacteria.

Phenotypic heterogeneity in bacterial populations is thought to contribute to a number of important phenomena including sporulation and persistence. The latter has clinical implications in many diseases such as tuberculosis, where persistence of Mycobacterium tuberculosis within the human host is believed to be the root cause of latent tuberculosis and the ability of a minority population of cells to survive antibiotic exposure, despite being genetically identical to the bulk population that are killed. However, phenotypic variations caused by non-genetic mechanisms are difficult to study because of the transient nature of the persistent state and thereby the requirement to observe individual cells in real-time. Recently, microfluidics, combined with time-lapse microscopy, has become a powerful tool for studying population heterogeneity in bacteria. However, growth and replication of mycobacterial cells provide particular problems for the development of microfluidic systems due to their tendency to grow in three dimensions. We here describe a novel microfluidic device for the observation of growth and antibiotic killing in individual mycobacterial cells. We constructed a microfluidic device suitable for studying single cell behavior in mycobacteria. The growth of single cells of Mycobacterium smegmatis expressing green fluorescent protein was monitored using a confocal laser scanning microscope. Within the device M. smegmatis cells were tightly confined within a hydrogel matrix thus promoting planar growth. Cell growth and killing was observed in the device with dead cells highlighted by uptake of propidium iodide. Conclusions/Significance. We demonstrate that our device allows real-time analysis and long-term culture of single cells of mycobacteria, and is able to support the study of cell death during the application of antibiotics. The device will allow observation of individual cells' cell genealogy to be determined and direct observation of rare states, such as persistence.