Relative permeability for water and gas through fractures in cement.

Relative permeability is an important attribute influencing subsurface multiphase flow. Characterization of relative permeability is necessary to support activities such as carbon sequestration, geothermal energy production, and oil and gas exploration. Previous research efforts have largely neglected the relative permeability of wellbore cement used to seal well bores where risks of leak are significant. Therefore this study was performed to evaluate fracturing on permeability and relative permeability of wellbore cement. Studies of relative permeability of water and air were conducted using ordinary Portland cement paste cylinders having fracture networks that exhibited a range of permeability values. The measured relative permeability was compared with three models, 1) Corey-curve, often used for modeling relative permeability in porous media, 2) X-curve, commonly used to represent relative permeability of fractures, and 3) Burdine model based on fitting the Brooks-Corey function to fracture saturation-pressure data inferred from x-ray computed tomography (XCT) derived aperture distribution results. Experimentally-determined aqueous relative permeability was best described by the Burdine model. Though water phase tended to follow the Corey-curve for the simple fracture system while air relative permeability was best described by the X-curve.

Design and performance evaluation of a 1000-year evapotranspiration-capillary surface barrier.

Surface barrier technology is used to isolate radioactive waste and to reduce or eliminate recharge water to the waste zone for 1000 years or longer. However, the design and evaluation of such a barrier is challenging because of the extremely long design life. After establishing a set of design and performance objectives, a package of design solutions was developed for 1000-year surface barriers over nuclear waste sites. The Prototype Hanford Barrier (PHB) was then constructed in 1994 in the field over an existing waste site as a demonstration. The barrier was tested to evaluate surface-barrier design and performance at the field scale under conditions of enhanced and natural precipitation and of no vegetation. The monitoring data demonstrate that the barrier satisfied nearly all objectives in the past two decades. The PHB far exceeded the Resource Conservation and Recovery Act criteria, functioned in Hanford's semiarid climate, limited drainage to well below the 0.5 mm yr-1 performance criterion, limited runoff, and minimized erosion and bio-intrusion. Given the two-decade record of successful performance and consideration of the processes and mechanisms that could affect barrier stability and hydrology in the future, the results suggest the PHB is very likely to perform for its 1000-year design life. This conclusion is based on two assumptions: (1) the exposed subgrade receives protection against erosion and (2) institutional controls prevent inadvertent human activity at the barrier. The PHB design can serve as the basis for site-specific barriers over waste sites containing underground nuclear waste, uranium mine tailings, and hazardous mine waste.