Phase-separating resins for light-based three-dimensional printing of oxide glasses.

Silica-based glasses can be shaped into complex geometries using a variety of additive manufacturing technologies. While the three-dimensional printing of glasses opens unprecedented design opportunities, the development of up-scaled, reliable manufacturing processes is crucial for the broader dissemination of this technology. Here, we design and study phase-separating resins that enable light-based 3D printing of oxide glasses with high-aspect-ratio features and enhanced manufacturing yields. The effect of the resin composition on the microstructure, mechanical properties and delamination resistance of parts printed by digital light processing is investigated with the help of printing experiments, compression tests and electron microscopy analysis. The chemical composition and microstructure of the cured resins were found to strongly affect the stiffness, delamination resistance, and calcination behavior of printed parts. These findings provide useful guidelines to enhance the reliability and yield of the DLP printing process of multicomponent silica-based glasses.

3D-Printed Architectured Silicones with Autonomic Self-Healing and Creep-Resistant Behavior.

Self-healing silicones that are able to restore functionalities and extend the lifetime of soft devices hold great potential in many applications. However, currently available silicones need to be triggered to self-heal or suffer from creep-induced irreversible deformation during use. Here, a platform is proposed to design and print silicone objects that are programmed at the molecular and architecture levels to achieve self-healing at room temperature while simultaneously resisting creep. At the molecular scale, dioxaborolanes moieties are incorporated into silicones to synthesize self-healing vitrimers, whereas conventional covalent bonds are exploited to make creep-resistant elastomers. When combined into architectured printed parts at a coarser length scale, the layered materials exhibit fast healing at room temperature without compromising the elastic recovery obtained from covalent polymer networks. A patient-specific vascular phantom and fluidic chambers are printed to demonstrate the potential of architectured silicones in creating damage-resilient functional devices using molecularly designed elastomer materials.

In vitro investigation of the blood flow downstream of a 3D-printed aortic valve.

The hemodynamics in the aorta as well as the durability of aortic valve prostheses vary greatly between different types of devices. Although placement and sizing of surgical aortic valve prostheses are excellent, the valve geometry of common devices cannot be customized to fit the patient's anatomy perfectly. Similarly, transcatheter aortic valve implantation (TAVI) devices are not customizable and may be orientated unfavorably during implantation. Imperfect fit of an aortic valve prosthesis may result in suboptimal performance and in some cases the need for additional surgery. Leveraging the advent of precision, multi-material 3D-printing, a bioinspired silicone aortic valve was developed. The manufacturing technique makes it fully customizable and significantly cheaper to develop and produce than common prostheses. In this study, we assess the hemodynamic performance of such a 3D-printed aortic valve and compare it to two TAVI devices as well as to a severely stenosed valve. We investigate the blood flow distal to the valve in an anatomically accurate, compliant aorta model via three-dimensional particle tracking velocimetry measurements. Our results demonstrate that the 3D-printed aortic valve induces flow patterns and topology compatible with the TAVI valves and showing similarity to healthy aortic blood flow. Compared to the stenosis, the 3D-printed aortic valve reduces turbulent kinetic energy levels and irreversible energy losses by over 75%, reaching values compatible with healthy subjects and conventional TAVIs. Our study substantiates that the 3D-printed heart valve displays a hemodynamic performance similar to established devices and underscores its potential for driving innovation towards patient specific valve prostheses.

3D Bioprinting of Diatom-Laden Living Materials for Water Quality Assessment.

Diatoms have long been used as living biological indicators for the assessment of water quality in lakes and rivers worldwide. While this approach benefits from the great diversity of these unicellular algae, established protocols are time-consuming and require specialized equipment. Here, this work 3D prints diatom-laden hydrogels that can be used as a simple multiplex bio-indicator for water assessment. The hydrogel-based living materials are created with the help of a desktop extrusion-based printer using a suspension of diatoms, cellulose nanocrystals (CNC) and alginate as bio-ink constituents. Rheology and mechanical tests are employed to establish optimum bio-ink formulations, whereas cell culture experiments are utilized to evaluate the proliferation of the entrapped diatoms in the presence of selected water contaminants. Bioprinting of diatom-laden hydrogels is shown to be an enticing approach to generate living materials that can serve as low-cost bio-indicators for water quality assessment.

A 3D-Printed Assemblable Bespoke Scaffold as a Versatile Microcryogel Carrier for Site-Specific Regenerative Medicine.

Advances in additive manufacturing have led to diverse patient-specific implant designs utilizing computed tomography, but this requires intensive work and financial implications. Here, Digital Light Processing is used to fabricate a hive-structured assemblable bespoke scaffold (HIVE). HIVE can be manually assembled in any shape/size with ease, so a surgeon can create a scaffold that will best fit a defect before implantation. Simultaneously, it can have site-specific treatments by working as a carrier filled with microcryogels (MC) incorporating different biological factors in different pockets of HIVE. After characterization, possible site-specific applications are investigated by utilizing HIVE as a versatile carrier with incorporated treatments such as growth factors (GF), bioceramic, or cells. HIVE as a GF-carrier shows a controlled release of bone morphogenetic protein/vascular endothelial growth factor (BMP/VEGF) and induced osteogenesis/angiogenesis from human mesenchymal stem cells (hMSC)/human umbilical vein endothelial cells (HUVECs). Furthermore, as a bioceramic-carrier, HIVE demonstrates enhanced mineralization and osteogenesis, and as a HUVEC carrier, it upregulates both osteogenic and angiogenic gene expression of hMSCs. HIVE with different combinations of MCs yields a distinct local effect and successful cell migration is confirmed within assembled HIVEs. Finally, an in vivo rat subcutaneous implantation demonstrates site-specific osteogenesis and angiogenesis.

Light-Based 3D Printing of Complex-Shaped Photonic Colloidal Glasses.

Colloidal glasses display angle-independent structural color that is tunable by the size and local arrangement of sub-micrometer particles. While films, droplets, and microcapsules with isotropic structural color have been demonstrated, the shaping of colloidal glasses in three dimensions remains an open manufacturing challenge. Here, a light-based printing platform for the shaping of colloidal glasses into 3D objects featuring complex geometries and vivid structural color after thermal treatment is reported. Rheology, photopolymerization, and calcination experiments are performed to design the photoreactive resins leading to printable colloidal glasses. With the help of microscopy, scattering, and optical characterization, it is shown that the photonic properties of the printed objects reflect the locally ordered microstructure of the glass. The capability of the platform in creating 3D objects with isotropic structural color is illustrated by printing lattices and miniaturized sculpture replicas with unique shapes and multimaterial designs.

Kirigami Makes a Soft Magnetic Sheet Crawl.

Limbless crawling on land requires breaking symmetry of the friction with the ground and exploiting an actuation mechanism to generate propulsive forces. Here, kirigami cuts are introduced into a soft magnetic sheet that allow to achieve effective crawling of untethered soft robots upon application of a rotating magnetic field. Bidirectional locomotion is achieved under clockwise and counterclockwise rotating magnetic fields with distinct locomotion patterns and crawling speed in forward and backward propulsions. The crawling and deformation profiles of the robot are experimentally characterized and combined with detailed multiphysics numerical simulations to extract locomotion mechanisms in both directions. It is shown that by changing the shape of the cuts and orientation of the magnet the robot can be steered, and if combined with translational motion of the magnet, complex crawling paths are programed. The proposed magnetic kirigami robot offers a simple approach to developing untethered soft robots with programmable motion.

Digital manufacturing of personalised footwear with embedded sensors.

The strong clinical demand for more accurate and personalized health monitoring technologies has called for the development of additively manufactured wearable devices. While the materials palette for additive manufacturing continues to expand, the integration of materials, designs and digital fabrication methods in a unified workflow remains challenging. In this work, a 3D printing platform is proposed for the integrated fabrication of silicone-based soft wearables with embedded piezoresistive sensors. Silicone-based inks containing cellulose nanocrystals and/or carbon black fillers were thoroughly designed and used for the direct ink writing of a shoe insole demonstrator with encapsulated sensors capable of measuring both normal and shear forces. By fine-tuning the material properties to the expected plantar pressures, the patient-customized shoe insole was fully 3D printed at room temperature to measure in-situ gait forces during physical activity. Moreover, the digitized approach allows for rapid adaptation of the sensor layout to meet specific user needs and thereby fabricate improved insoles in multiple quick iterations. The developed materials and workflow enable a new generation of fully 3D printed soft electronic devices for health monitoring.

Hierarchical Porous Monoliths of Steel with Self-Reinforcing Adaptive Properties.

Porous structures offer an attractive approach to reduce the amount of natural resources used while maintaining relatively high mechanical efficiency. However, for some applications the drop in mechanical properties resulting from the introduction of porosity is too high, which has limited the broader utilization of porous materials in industry. Here, it is shown that steel monoliths can be designed to display high mechanical efficiency and reversible self-reinforcing properties when made with porous architectures with up to three hierarchical levels. Ultralight steel structures that can float on water and autonomously adapt their stiffness are manufactured by the thermal reduction and sintering of 3D printed foam templates. Using distinct mechanical testing techniques, image analysis, and finite element simulations, the mechanisms leading to the high mechanical efficiency and self-stiffening ability of the hierarchical porous monoliths are studied. The design and fabrication of mechanically stable porous monoliths using iron as a widely available natural resource is expected to contribute to the future development of functional materials with a more sustainable footprint.

Three-dimensional printing of mycelium hydrogels into living complex materials.

Biological living materials, such as animal bones and plant stems, are able to self-heal, regenerate, adapt and make decisions under environmental pressures. Despite recent successful efforts to imbue synthetic materials with some of these remarkable functionalities, many emerging properties of complex adaptive systems found in biology remain unexplored in engineered living materials. Here, we describe a three-dimensional printing approach that harnesses the emerging properties of fungal mycelia to create living complex materials that self-repair, regenerate and adapt to the environment while fulfilling an engineering function. Hydrogels loaded with the fungus Ganoderma lucidum are three-dimensionally printed into lattice architectures to enable mycelial growth in a balanced exploration and exploitation pattern that simultaneously promotes colonization of the gel and bridging of air gaps. To illustrate the potential of such mycelium-based living complex materials, we three-dimensionally print a robotic skin that is mechanically robust, self-cleaning and able to autonomously regenerate after damage.

Complex Living Materials Made by Light-Based Printing of Genetically Programmed Bacteria.

Living materials with embedded microorganisms can genetically encode attractive sensing, self-repairing, and responsive functionalities for applications in medicine, robotics, and infrastructure. While the synthetic toolbox for genetically engineering bacteria continues to expand, technologies to shape bacteria-laden living materials into complex 3D geometries are still rather limited. Here, it is shown that bacteria-laden hydrogels can be shaped into living materials with unusual architectures and functionalities using readily available light-based printing techniques. Bioluminescent and melanin-producing bacteria are used to create complex materials with autonomous chemical-sensing capabilities by harnessing the metabolic activity of wild-type and engineered microorganisms. The shaping freedom offered by printing technologies and the rich biochemical diversity available in bacteria provides ample design space for the creation and exploration of complex living materials with programmable functionalities for a broad range of applications.

Dual carbon sequestration with photosynthetic living materials.

Natural ecosystems offer efficient pathways for carbon sequestration, serving as a resilient approach to remove CO2 from the atmosphere with minimal environmental impact. However, the control of living systems outside of their native environments is often challenging. Here, we engineered a photosynthetic living material for dual CO2 sequestration by immobilizing photosynthetic microorganisms within a printable polymeric network. The carbon concentrating mechanism of the cyanobacteria enabled accumulation of CO2 within the cell, resulting in biomass production. Additionally, the metabolic production of OH- ions in the surrounding medium created an environment for the formation of insoluble carbonates via microbially-induced calcium carbonate precipitation (MICP). Digital design and fabrication of the living material ensured sufficient access to light and nutrient transport of the encapsulated cyanobacteria, which were essential for long-term viability (more than one year) as well as efficient photosynthesis and carbon sequestration. The photosynthetic living materials sequestered approximately 2.5 mg of CO2 per gram of hydrogel material over 30 days via dual carbon sequestration, with 2.2 ± 0.9 mg stored as insoluble carbonates. Over an extended incubation period of 400 days, the living materials sequestered 26 ± 7 mg of CO2 per gram of hydrogel material in the form of stable minerals. These findings highlight the potential of photosynthetic living materials for scalable carbon sequestration, carbon-neutral infrastructure, and green building materials. The simplicity of maintenance, coupled with its scalability nature, suggests broad applications of photosynthetic living materials as a complementary strategy to mitigate CO2 emissions.

Living materials made by 3D printing cellulose-producing bacteria in granular gels.

Bacterial cellulose is an attractive resource for the manufacturing of sustainable materials, but it is usually challenging to shape it into elaborate three-dimensional structures. Here, we report a manufacturing platform for the creation of complex-shaped cellulose objects by printing inks loaded with bacteria into a silicone-based granular gel. The gel provides the viscoelastic behavior necessary to shape the bacteria-laden ink in three dimensions and the gas permeability required to sustain cellular growth and cellulose formation after the printing process. Using Gluconacetobacter xylinus as model cellulose-producing bacteria, we study the growth and the mechanical properties of cellulose fiber networks obtained upon incubation of the printed inks. Diffusion processes within the ink were found to control the growth of the cellulose structures, which display mechanical properties within the range expected for conventional hydrogels. By keeping the bacteria alive in the printed object, we produce living materials in complex geometries that are able to self-regenerate their cellulose fiber network after damage. Such living hydrogels represent an enticing development towards functional materials with autonomous self-healing and self-regenerating capabilities.

Nacre-like composites with superior specific damping performance.

Biological materials such as nacre have evolved microstructural design principles that result in outstanding mechanical properties. While nacre's design concepts have led to bio-inspired materials with enhanced fracture toughness, the microstructural features underlying the remarkable damping properties of this biological material have not yet been fully explored in synthetic composites. Here, we study the damping behavior of nacre-like composites containing mineral bridges and platelet asperities as nanoscale structural features within its brick-and-mortar architecture. Dynamic mechanical analysis was performed to experimentally elucidate the role of these features on the damping response of the nacre-like composites. By enhancing stress transfer between platelets and at the brick/mortar interface, mineral bridges and nano-asperities were found to improve the damping performance of the composite to levels that surpass many biological and man-made materials. Surprisingly, the improved properties are achieved without reaching the perfect organization of the biological counterparts. Our nacre-like composites display a loss modulus 2.4-fold higher than natural nacre and 1.4-fold more than highly dissipative natural fiber composites. These findings shed light on the role of nanoscale structural features on the dynamic mechanical properties of nacre and offer design concepts for the manufacturing of bio-inspired composites for high-performance damping applications.

Three-dimensional printing of photonic colloidal glasses into objects with isotropic structural color.

Structural color is frequently exploited by living organisms for biological functions and has also been translated into synthetic materials as a more durable and less hazardous alternative to conventional pigments. Additive manufacturing approaches were recently exploited for the fabrication of exquisite photonic objects, but the angle-dependence observed limits a broader application of structural color in synthetic systems. Here, we propose a manufacturing platform for the 3D printing of complex-shaped objects that display isotropic structural color generated from photonic colloidal glasses. Structurally colored objects are printed from aqueous colloidal inks containing monodisperse silica particles, carbon black, and a gel-forming copolymer. Rheology and Small-Angle-X-Ray-Scattering measurements are performed to identify the processing conditions leading to printed objects with tunable structural colors. Multimaterial printing is eventually used to create complex-shaped objects with multiple structural colors using silica and carbon as abundant and sustainable building blocks.

Digital Light 3D Printed Bioresorbable and NIR-Responsive Devices with Photothermal and Shape-Memory Functions.

Digital light processing (DLP) 3D printing is a promising technique for the rapid manufacturing of customized medical devices with high precision. To be successfully translated to a clinical setting, challenges in the development of suitable photopolymerizable materials have yet to be overcome. Besides biocompatibility, it is often desirable for the printed devices to be biodegradable, elastic, and with a therapeutic function. Here, a multifunctional DLP printed material system based on the composite of gold nanorods and polyester copolymer is reported. The material demonstrates robust near-infrared (NIR) responsiveness, allowing rapid and stable photothermal effect leading to the time-dependent cell death. NIR light-triggerable shape transformation is demonstrated, resulting in a facilitated insertion and expansion of DLP printed stent ex vivo. The proposed strategy opens a promising avenue for the design of multifunctional therapeutic devices based on nanoparticle-polymer composites.

Light-Based Printing of Leachable Salt Molds for Facile Shaping of Complex Structures.

3D printing is a powerful manufacturing technology for shaping materials into complex structures. While the palette of printable materials continues to expand, the rheological and chemical requisites for printing are not always easy to fulfill. Here, a universal manufacturing platform is reported for shaping materials into intricate geometries without the need for their printability, but instead using light-based printed salt structures as leachable molds. The salt structures are printed using photocurable resins loaded with NaCl particles. The printing, debinding, and sintering steps involved in the process are systematically investigated to identify ink formulations enabling the preparation of crack-free salt templates. The experiments reveal that the formation of a load-bearing network of salt particles is essential to prevent cracking of the mold during the process. By infiltrating the sintered salt molds and leaching the template in water, complex-shaped architectures are created from diverse compositions such as biomedical silicone, chocolate, light metals, degradable elastomers, and fiber composites, thus demonstrating the universal, cost-effective, and sustainable nature of this new manufacturing platform.

Stretchable Soft Composites with Strain-Induced Architectured Color.

Colors enable interaction and communication between living species in a myriad of biological and artificial environments. While living organisms feature low-power mechanisms to dynamically control color in soft tissues, man-made color-changing devices remain predominantly rigid and energy intensive. Here, architectured composites that display striking color changes when stretched in selective directions under ambient light with minimum power input are reported. The orientation-dependent color change results from the rotation of reflective coated platelets that are embedded in a soft polymer matrix and pre-aligned in a well-defined architecture. The light reflected by the platelets generates structural color defined by the oxide coating on the platelet surface. By magnetically programming the initial orientation and spatial distribution of selected platelets within the soft matrix, composites with strain-modulated color-changing effects that cannot be achieved using state-of-the-art technologies are created. The proposed concept of strain-induced architectured color can be harnessed to develop low-power smart stretchable displays, tactile synthetic skins, and autonomous soft robotic devices that undergo fast and reversible color changes through the mechano-optic coupling programmed within their soft composite architecture.

Magnetic Manipulation of Nanowires for Engineered Stretchable Electronics.

Nanowires are often key ingredients of high-tech composite materials. The properties and performance of devices created using these, depend heavily on the structure and density of the embedded nanowires. Despite significant efforts, a process that can be adapted to different materials, compatible with current nanowire deposition methods, and that is able to control both variables simultaneously has not been achieved yet. In this work, we show that we can use low magnetic fields (80 mT) to manipulate nanowires by electrostatically coating them with superparamagnetic iron oxide nanoparticles in an aqueous solution. Monolayers, multilayers, and hierarchical structures of oriented nanowires were achieved in a highly ordered manner using vacuum filtration for two types of nanowires: silver and gold-coated titanium dioxide nanowires. The produced films were embedded in an elastomer, and the strain-dependent electrical properties of the resulting composites were investigated. The orientation of the assembly with respect to the tensile strain heavily impacts the performance of the composites. Composites containing nanowires perpendicular to the strain direction exhibit an extremely low gauge factor. On the other hand, when nanowires are arranged parallel to the strain direction, the composites have a high gauge factor. The possibility to orient nanowires during the processing steps is not only interesting for the shown strain sensing application but also expected to be useful in many other areas of material science.

Hierarchical porous materials made by stereolithographic printing of photo-curable emulsions.

Porous materials are relevant for a broad range of technologies from catalysis and filtration, to tissue engineering and lightweight structures. Controlling the porosity of these materials over multiple length scales often leads to enticing new functionalities and higher efficiency but has been limited by manufacturing challenges and the poor understanding of the properties of hierarchical structures. Here, we report an experimental platform for the design and manufacturing of hierarchical porous materials via the stereolithographic printing of stable photo-curable Pickering emulsions. In the printing process, the micron-sized droplets of the emulsified resins work as soft templates for the incorporation of microscale porosity within sequentially photo-polymerized layers. The light patterns used to polymerize each layer on the building stage further generate controlled pores with bespoke three-dimensional geometries at the millimetre scale. Using this combined fabrication approach, we create architectured lattices with mechanical properties tuneable over several orders of magnitude and large complex-shaped inorganic objects with unprecedented porous designs.