A thin-layer contactless conductivity cell for detection in flowing liquids.

The design is described of a thin-layer contactless conductivity detector suitable for liquid chromatography and flow-injection analysis. Its principal analytical parameters have been determined using a potassium chloride solution: the linear dynamic range extends from 7.5 x 10(-6) to 1.5 x 10(-2) S m(-1), corresponding to the KCl concentration range from 0.5 to 1000 microM, the limit of detection equals 3.5 x 10(-6) S m(-1) (0.2 microM KCl), the detection repeatability, expressed in terms of the relative standard deviation, amounts to 1.13% and the detection volume is 0.6 microL. The detector was applied to detection of ionic compounds, benzoic, lactic and octanesulfonic acids, and sodium capronate, after their separation by liquid chromatography in a Biospher PSI 100C 18 columns using a 60% aqueous acetonitrile mobile phase. The frequency characteristics of the detector are reasonably theoretically described on the basis of a simple model which is commonly used in the field of contactless impedance detectors.

Effects of electrolyte modification and capillary coating on separation of glycoprotein isoforms by capillary electrophoresis.

The capillary electrophoresis (CE) running electrolyte composition was optimized for the separation of selected glycoproteins. A good separation of the ovalbumin (OV) and alpha-acid glycoprotein (AAG) isoforms was achieved in 20 mmol x L(-1) N-(2-hydroxyethyl)piperazine-2'-(2-ethanesulfonic acid) (HEPES) at pH 7.0, in 20 mmol x L(-1) phosphate, pH 7.0, or in 25 mmol x L(-1) borate, pH 7.9. Various ways of suppression of the glycoprotein adsorption onto the capillary wall were compared. Alpha, omega-diamine alkanes and bis(aminoalkyl) amines were added to the CE buffers, the optimized concentration being 1 mmol x L(-1) in 20 mmol x L(-1) phosphate buffer. The OV and AAG isoforms could be separated using all the alpha,omega-diamine alkanes or bis(2-aminoethyl)amine. The length of the alkyl chain in the diaminoalkane did not influence the separation. The separation of the isoforms of pollen allergens was also tested. The effects of modification of the capillary wall by succinyl-poly-L-lysine and hydrophilic CElect-P1 capillary were compared. A decrease in the glycoprotein and protein adsorption resulted in an improved separation of the isoforms.

Validation of a method for determination of phospholipase A2 and melittin in bee venom preparations by capillary electrophoresis.

A method was validated for the determination of the 2 main components of bee venom, phospholipase A2 and melittin, by capillary electrophesis (CE). Optimum resolution and selectivity were attained with a running electrolyte of 150 mM phosphoric acid, pH 1.8. The repeatability and day-to-day reproducibility of the migration times were better than 0.36 and 2.8%, respectively. The repeatability and day-to-day reproducibility of the normalized peak areas were better than 1.3 and 2.6%, respectively. The response of the UV detector at 190 nm was linear over < 2 concentration decades, from 0.05 to 1.5 mg/mL, with correlation coefficients of 0.9994 for phospholipase A2 and 0.9997 for melittin. The limits of detection and quantitation were 4.5 and 15 microg/mL, respectively, for phospholipase A2 and 1.6 and 6 microg/mL, respectively, for melittin. The reproducibility of the measurements with 2 different CE instruments was satisfactory; the mean concentration and relative standard deviation (RSD) values for phospholipase A2 and melittin were 14.4% (RSD, 1.3%) and 51.4% (RSD, 1.1%), respectively, with instrument I; the corresponding values with instrument II were 14.5% (RSD, 2.8%) and 52.3% (RSD, 2.2%). The accuracy was estimated by comparison with a liquid chromatographic (LC) method. Differences between the CE and LC measurements were attributed to irreversible adsorption of the analytes on the LC column. The recoveries of phospholipase A2 and melittin with the CE method were 98.8 and 101.7%, respectively.

A study of the distribution of lead, cadmium and copper between water and kaolin, bentonite and a river sediment.

Experiments were carried out to monitor the equilibrium distribution of lead, cadmium and copper between an aqueous phase modelling natural water and a solid phase modelling natural sediment, under varying conditions. The aqueous phase was analysed using ETAAS and differential pulse anodic stripping voltammetry (DPASV), whereas XRD and FTIR were used to study the solid phase. Sorption isotherms at constant pH were measured. Conditional distribution constants were calculated as functions of the pH, the time of equilibration and the amount of solid material. The results obtained stress the need for standardization of the approaches to the study of water-sediment interactions in order to be able to evaluate and compare the extensive data from field measurements and to predict these interactions.

High-performance liquid chromatographic determination of some anthraquinone and naphthoquinone dyes occurring in historical textiles.

A reversed-phase HPLC method has been developed for identification and quantitation of nine natural quinone dyes and applied to historical textile fibres. A Purospher RP18e column was used with a convex gradient of methanol in a mobile phase of 0.1 M aqueous citrate buffer (pH 2.5) and spectrophotometric diode-array detection at 270 nm. For identification of alizarin, purpurin and xanthopurpurin, occurring together in the madder plant, an isocratic method was used with a methanol-0.2 M acetate buffer (pH 4.3) (75:25) as the mobile phase. After an acid extraction of textile fibres and the analysis of the extracts, alizarin and purpurin were identified and quantitated in three fibres.

Separation and quantification of ropinirole and some impurities using capillary liquid chromatography.

Ropinirole, 4-[2-(dipropylamino)ethyl]-1,3-dihydro-2H-indol-2-one, is a potent anti-Parkinson's disease drug developed by SmithKline Beecham Pharmaceuticals. Capillary liquid chromatography (CLC) was used for the separation and quantification of ropinirole and its five related impurities, potentially formed during its synthesis. A simultaneous optimization of three mobile phase parameters, i.e., pH, buffer concentration and acetonitrile content was performed employing an experimental design approach which proved a powerful tool in method development. The retention factors of the investigated substances in different mobile phases were determined. Baseline resolution of the six substances on a C18 reversed stationary phase was attained using a mobile phase with an optimized composition [acetonitrile-8.7 mM 2-(N-morpholino)ethanesulfonic acid adjusted to pH 6.0 (55:45, v/v)]. It was shown that CLC, operated in the isocratic mode under the mobile phase flow-rate of 4 microl/min, can determine the level of these impurities, down to a level of 0.06% of the main component within 25 min.

Determination of the dissociation constants of ropinirole and some impurities and their quantification using capillary zone electrophoresis.

Ropinirole, 4-[2-(dipropylamino)ethyl]-1,3-dihydro-2H-indol-2-one, is a potent anti-Parkinson's disease drug developed by SmithKline Beecham Pharmaceuticals. Capillary zone electrophoresis (CZE) was used for the determination of the dissociation constants of ropinirole and five structurally related impurities, potentially formed during its synthesis and for separation and quantification of these substances. The dissociation constants obtained from the CZE measurements were confirmed by UV spectrophotometry for some of the test compounds, obtaining a good agreement between the values. Careful optimization of the running buffer composition permitted base-line resolution of the six compounds in a borate buffer containing acetonitrile and magnesium sulfate (a 100 mM borate buffer containing 30 mM MgSO4 and 20 vol.% of acetonitrile). It was shown that CZE can determine the level of these impurities, down to a level of 0.05% of the main component within 15 min.

High-performance separations in isolation and characterization of allergens.

The present state of the use of separation techniques in the identification and characterization of allergens and in the monitoring of the quality of allergenic preparations is critically surveyed. After a brief summary of the range of problems encountered in obtaining and in the application of allergenic preparations and of the principal physico-chemical properties of allergens, chromatographic and electromigration methods of separation of components of these systems and their combinations with immunochemical procedures are discussed, with selected examples of application to real materials. Emphasis is placed on evaluation of the most important analytical parameters, such as reliability of the results, separation efficiency and resolution, and on the most recent results in the field.

Capillary electrophoresis of cytokinins and cytokinin ribosides.

A CE separation of cytokinins and cytokinin ribosides and some other purine and pyrimidine bases has been developed. Two electrolyte systems have been tested: 150 mM phosphoric acid, pH 1.8 and 50 mM sodium dodecylsulphate + 20 mM borate, pH 9.2. The migration times were measured and the effects of the solute structures were discussed. Preliminary experiments with plant extracts have been performed to identify the cytokinins and their ribosides. Both the systems can be used, but 150 mM phosphoric acid is better suited for identification of cytokinins in plant extracts, as the electropherograms are subject to fewer interferences.

A simple method for the trace determination of methanol, ethanol, acetone and pentane in human breath and in the ambient air by preconcentration on solid sorbents followed by gas chromatography.

A simple technique has been developed for preconcentration of gaseous trace organic compounds on solid sorbents, followed by gas chromatography. The sorbent is packed in a cartridge from a syringe needle placed in the gas chromatographic injector and the analytes previously adsorbed are thermally desorbed at the injector temperature and then directly swept by the carrier gas into the column. The system has been tested for a charcoal-based adsorbent and silica gel, with pentane, methanol, ethanol and acetone as the model analytes. The procedure is rapid, the detection limits vary from a few nmol l(-1) to values below 0.1 nmol l(-1) (i.e., a few ppb), the linear dynamic range amounts to at least five concentration decades and a typical relative standard deviation is 10% at the nmol l(-1) concentrations. It has been shown that the method is readily applicable to determination of instantaneous concentrations of the analytes in natural and industrial atmosphere and to their monitoring in human breath which is important for medical and hygienic practice. In general, the procedure is applicable to low-molecular volatile organic compounds.

Size-exclusion liquid chromatography and capillary electrophoresis of pollen allergens.

Allergens from the pollen of Phleum pratense, Dactylis glomerata. Arrhenatherum elatius, Secale cereale, Lolium perrene and Festuca sp. were analysed by size-exclusion chromatography (SEC) and capillary electrophoresis (CE). SEC was used for the determination of the molecular masses of main allergens. A CE method, using either 150 mmol/l phosphoric acid (pH 1.8) or a micellar system consisting of 50 mmol/l sodium dodecyl sulphate-20 mmol/l borate (pH 9.35), was developed as a rapid and efficient alternative to SEC, especially for process control of allergenic preparations. The results obtained by the two methods confirmed similarities in the structures of the studied pollen allergens.

Separation of biologically active peptides by capillary electrophoresis and high-performance liquid chromatography.

HPLC and CE have been applied to the separation of some newly synthesized substances, including nonapeptides from the intrachinary region of insulin, insulin-like growth factors I and II (IGF I and II) and some penta- and hexapeptides. All the peptides are satisfactorily separated using a reversed-phase HPLC system with a C18 stationary phase and mobile phases of 20-40% acetonitrile (v/v) and 0.2% trifluoroacetic acid in water (v/v). The best CE separation of IGF I and II has been achieved in a 30 mM phosphate buffer (pH 4-5), whereas 150 mM phosphoric acid (pH 1.8) is optimal for the insulin nonapeptides. The latter electrolyte is also suitable for the CE separation of the hexapeptides, as is a micellar system containing 20 mM borate-50 mM sodium dodecyl sulfate (pH 9.0). Complete CE resolution of the D- and L-forms is possible in a 50 mM phosphate buffer (pH 2.5) containing 10 mM beta-cyclodextrin. UV spectrophotometric detection was used throughout, at wavelengths from 190 to 215 nm. The CE procedures are, in general, preferable to HPLC separations, as they exhibit better separation efficiencies, are faster and consume smaller amounts of analytes and reagents.

Capillary gas chromatography of underivatized fatty acids with a free fatty acid phase column and a programmed temperature vaporizer injector.

Underivatized fatty acids occurring in lipids of a number of biological specimens (blood plasma, tissues, food) were studied using a capillary column with a chemically bonded free fatty acid phase and a programmed temperature vaporizer. Non-linear calibration dependences were obtained for almost all the acids at lower concentrations because of losses in the column, non-linearity increasing with increasing carbon number and degree of unsaturation. Sample introduction at temperatures below the solvent boiling point eliminates losses in the injector. The lower recovery of long-chain polyunsaturated acids is caused by interactions occurring in the column. Some critical pairs remain unresolved in the underivatized form (18:1n9-18:1n7, 20:4n6-20:3n3), whereas the corresponding methyl esters exhibit baseline resolution.

Discontinuous-flow potentiometric determination of chloride in a large-volume wall-jet cell using an ion-selective electrode based on a silver chloride film chemically deposited on a silver iodide support.

A robust and sensitive chloride ion-selective electrode can be prepared by modifying the surface of an iodide-selective electrode using the chemical reaction with mercuric chloride in an oxidizing medium containing excess chloride. A thin film of silver chloride is thus formed ensuring a rapid and reproducible response to chloride. The analytical parameters of this electrode are similar to those of commercial silver chloride ion-selective electrodes, but its electrical impedance and signal noise are substantially lower and the response somewhat faster. Its sensitivity toward surfactants is somewhat suppressed. The electrode was used for discontinuous flow potentiometric (DFP) determinations in a large-volume wall-jet cell in which the electrode surface can be continuously reactivated by a cleaning solution contained in the cell. The method was applied to determination of chloride in ground waters from an industrial waste dumping site. The limit of determination is low 9 mug Cl(-)/l (2.6 x 10(-7)M), the precision good (the relative standard deviation varies from 0.6 to 3.0% for chloride contents from 2.90 to 0.15 mg/l, respectively) and the method correlates satisfactorily with the results of an indirect AAS determination of chloride. The sample throughput is high-90 measurements can be carried out per hour, corresponding to 30-40 determinations per hour.

High-performance liquid chromatographic determination of creatinine in serum, and a correlation of the results with those of the Jaffé and enzymic methods.

A high-performance liquid chromatographic method for the determination of creatinine in control sera is reported, based on its separation from deproteinated serum components on the ion-exchange material HEMA Bio 1000 SB and ultraviolet detection at 230 nm. Groups of eleven to fourteen samples of human serum and several control materials were simultaneously analysed by the Jaffé, enzymic ultraviolet and enzymic peroxidase aminophenazone methods. Another group (52-115 sera) was analysed for correlations with spectrophotometric methods. The precision of the chromatographic method ranges between 2.0 and 1.0% (relative standard deviation) for serum creatinine concentrations of 115.1 to 471 mumol/l, respectively. A very good accuracy was found in analyses of reference materials Kontrollogen-L and -LP. Some results of analyses of the other control sera were higher and the other lower than those obtained by the Jaffé and enzymic methods, because both interferences and enzyme inhibitors were encountered. Correlations between the chromatographic and spectrophotometric methods were good.

An ion-exchange separation of metal cations on a C-18 column coated with dodecylsulphate.

The retention mechanism was studied for the cations of the alkaline earth metals and Zn(2+) Ni(2+), Co(2+), Cd(2+) and Bi(3+) on a C(18) column permanently coated with sodium dodecylsulphate, with aqueous mobile phases containing cupric chloride or sulphate, or cerous nitrate. The dependencies of the logarithm or the capacity ratio on the logarithm of the eluent concentration were linear, demonstrating that ion-exchange was the predominating separation mode; the slopes of these dependencies were in good agreement with the values predicted from the ion-exchange theory. Indirect UV photometric detection yielded limits of detection (LOD) of 21, 44, 120 and 275 ng in the volume injected, 20 mul, for Mg(2+), Ca(2+), Sr(2+) and Ba(2+), respectively, with the 10(-2)M copper(II) chloride mobile phase; the respective LOD values decreased to 0.8, 1.6, 3.0 and 6.7 ng with the 5 x 10(-4)M cerium(III) nitrate eluent. The method was found to be primarily suitable for determination of the alkaline earths and was applied to analyses of surface and mineral waters.

Unsegmented flow analysis with ion-selective electrodes by use of a large-volume wall-jet cell Continuous electrode reactivation in the determination of fluoride and chloride.

A simple, large-volume wall-jet cell was designed for unsegmented flow analysis. The working electrode is immersed in a solution that reactivates the electrode surface. During the sample measurement, the working electrode is screened from the reactivation solution by the streaming sample solution; between the individual samples, air is pumped through the jet and agitates the reactivating solution at the electrode surface. The properties of the cell were investigated with the fluoride and chloride ion-selective electrodes and the method was applied to determination of fluoride and chloride in steel corrosion products and in a reference sample of the fly dust from electric-arc furnaces. The method permits about 90 measurements per hour, the results are reproducible and the limits of determination (6.3 x 10(-8) and 2.3 x 10(-7)M for fluoride and chloride, respectively) are substantially lower than the values commonly obtained in batch experiments. At least 150 measurements can be carried out without significant changes in the reliability of determination and the reactivation solution can then be replaced.

An ion-exchange separation of Cu(2+), Cd(2+), Pb(2+) and Tl(+) on silica gel with polarographic detection.

The HPLC separation of heavy metal cations was studied with a column packed with Separon SGX silica gel. The retention of the cations is controlled by an ion-exchange mechanism. The ion-exchange capacity is primarily dependent on the mobile phase pH. The analyte retention is further affected by the type and concentration of the completing agent present and of the counterion. The effect of acetate, tartrate and alpha-hydroxyisobutyrate as complexing agents and that of methanol as the organic modifier were studied in detail and the results were compared with the theoretical model of ion-exchange separation. Simple mixtures of metals can be rapidly separated on a short column (30 x 3.3 mm i.d.), e.g., with a mobile phase containing 10(-2)M tartrate at pH 6.0. The metals separated can be detected by dc amperometry at a hanging mercury drop electrode. The limits of detection at an electrode potential of -0.95 V (Ag/AgCl) are in the units-tens of ng range with 20-mul samples with satisfactory precision (RSD values of 2-6%). The main advantages of the method are rapidly and simplicity because derivatization of the analytes is not required.

High-performance liquid chromatographic determination of cholesteryl esters in the blood of obese children.

The serum of obese children and adolescents was analyzed for cholesteryl esters. The test substances were first separated from the sample matrix by solvent extraction and thin-layer chromatography and then resolved in a reversed-phase high-performance liquid chromatographic system involving a Separon SGX C18 column and a mobile phase of 2-propanol-acetonitrile (40:60, v/v), with ultraviolet detection at 206 nm. Cholesterol and 10-cholesteryl esters could be separated and determined within ca. 25 min at a flow-rate of 1 ml/min. The method was applied to a study of the effect of external conditions (physical stress, diet) on the content of cholesteryl esters in a test group of obese boys and girls aged from 13 to 16 years. The analyses have demonstrated that the above conditions do not affect the concentrations of the individual cholesteryl esters, although the total cholesterol concentration decreased significantly after spa treatment.

Determination of narciclasine in serum by reversed-phase high-performance liquid chromatography: comparison of amperometric, ultraviolet photometric and fluorescence detection.

Narciclasine was determined in the blood of mice by reversed-phase high-performance liquid chromatography, using a C18 stationary phase and a mobile phase of methanol-0.025 M potassium dihydrogen phosphate (50:50, v/v) of pH 5.5. Amperometric detection at a carbon fibre array working electrode held at +1.8 V (Ag/AgCl) permitted determination down to concentrations of 10 and 15.4 ng ml-1 (at a signal-to-noise ratio of 2) in aqueous solution and in serum, respectively. Fluorescence detection (excitation and emission wavelengths of 360 and 480 nm, respectively) exhibited somewhat poorer sensitivities for aqueous and serum samples: the respective limits of detection were 25 and 32 ng ml-1 at a signal-to-noise ratio of 2. Both the amperometric and the fluorescence detection were free from interference from blood components, but the fluorescence measurement required a post-column pH adjustment. UV photometric detection at 254 nm exhibited detection limits of 15 and 65 ng ml-1 in aqueous samples and in serum, respectively, and suffered from interferences from blood components that strongly absorbed in the ultraviolet region. All three detection techniques exhibited good linearity and precision.