Enhancing Electrochemical CO2 Reduction on Perovskite Oxide for Solid Oxide Electrolysis Cells through In Situ A-Site Deficiencies and Surface Carbonate Deposition Induced by Lithium Cation Doping and Exsolution.

Solid oxide electrolysis cells (SOECs) hold enormous potential for efficient conversion of CO2 to CO at low cost and high reaction kinetics. The identification of active cathodes is highly desirable to promote the SOEC's performance. This study explores a lithium-doped perovskite La0.6- x Lix Sr0.4 Co0.7 Mn0.3 O3-δ (x = 0, 0.025 0.05, and 0.10) material with in situ generated A-site deficiency and surface carbonate as SOEC cathodes  for CO2 reduction. The experimental results indicate that the SOEC with the La0.55 Li0.05 Sr0.4 Co0.7 Mn0.3 O3-δ cathode exhibits a current density of 0.991 A cm-2 at 1.5 V/800 °C, which is an improvement of ≈30% over the pristine sample. Furthermore, SOECs based on the proposed cathode demonstrate excellent stability over 300 h for pure CO2 electrolysis. The addition of lithium with high basicity, low valance, and small radius, coupled with A-site deficiency, promotes the formation of oxygen vacancy and modifies the electronic structure of active sites, thus enhancing CO2 adsorption, dissociation process, and CO desorption steps as corroborated by the experimental analysis and the density functional theory calculation. It is further confirmed that Li-ion migration to the cathode surface forms carbonate and consequently provides the perovskite cathode with an impressive anti-carbon deposition capability, as well as electrolysis activity.

Protein-rich yeast extract (®fermgard) has potential antioxidant and anti-aging activities.

There existed a deficiency in the research on the nutritional activities of microbial (yeast) active substances in antioxidant and anti-aging activities, although the research objects were concentrated in animals and plants in recent years. In this study, the anti-oxidant and anti-aging activities of protein-rich yeast extract (®fermgard) (YE) were investigated through Caenorhabditis elegans (C. elegans). The results indicated that YE could improve the lifespan and anti-stress ability by up-regulating the activities of antioxidant enzymes in C. elegans. Meanwhile, the mRNA transcriptional level of daf-16, skn-1 and sod-3 was significantly up-regulated. In addition, the composition and level of the gut microbiota and metabolite were modulated. YE exerts antioxidant and anti-aging activities by regulating the expression of anti-oxidation-related mRNA, gut microbiota and metabolites in C. elegans, providing a basis for exploring the deep mechanism of YE improving health. At the same time, it provides new ideas for the development of functional foods.

A practical method for fabricating superparamagnetic films and the mechanism involved.

Due to the widespread applications of biosensors, such as in magnetic resonance imaging, cancer detection and drug delivery, the use of superparamagnetic materials for preparing biosensors has increased greatly. We report herein on a strategy toward fabrication of a nanoscale biosensor composed of superparamagnetic films. On increasing the film thickness of magnetic layers, a phase transition typically occurs from either a low-Curie-temperature state or a superparamagnetic state to a ferromagnetic state. A new finding is demonstrated wherein a phase transition of such a superparamagnetic phase can be induced by controlling the thickness of ultrathin ferromagnetic layers with perpendicular magnetic anisotropy. Both the M-H curve with zero coercive force at 300 K and deviations of the normalized hysteresis loop at 2 K confirm the superparamagnetic state of Co/Ir(111) at room temperature. An overstrained film transforming into clusters (OFTC) model based on the new finding and our experimental evidence is proposed for modeling this phenomenon. From the energetic point of view of the OFTC model, we propose a limited distortion mechanism that can be useful in determining the critical thickness for the phase transition. This mechanism considers the balance between interfacial strain energy and surface free energy. A method for producing superparamagnetic films by taking advantage of the accumulation of strain and relaxation is reported.

Observing quantum trapping on MoS2 through the lifetimes of resonant electrons: revealing the Pauli exclusion principle.

We demonstrate that the linewidth of the field emission resonance (FER) observed on the surface of MoS2 using scanning tunneling microscopy can vary by up to one order of magnitude with an increasing electric field. This phenomenon originates from quantum trapping, in which the electron relaxed from a resonant electron in the FER is momentarily trapped in a potential well on the MoS2 surface due to its wave nature. Because the relaxed electron and the resonant electron have the same spin, through the action of the Pauli exclusion principle, the lifetimes of the resonant electrons can be substantially prolonged when the relaxed electrons engage in resonance trapping. The linewidth of the FER is thus considerably reduced to as narrow as 12 meV. The coexistence of the resonant electron and the relaxed electron requires the emission of two electrons, which can occur through the exchange interaction.

Enhancing silicide formation in Ni/Si(111) by Ag-Si particles at the interface.

Compound formation at a metal/semiconductor interface plays crucial roles in the properties of many material systems. Applications of Ni silicides span numerous areas and have the potential to be used as new functionalities. However, the magnetic properties of ultrathin Ni layers on silicon surfaces and related chemical compositions at the interface are not fully understood and the influence of Ag additives on the reactivity of Ni/Si(111) remain unclear. We report herein on the fact that the dominant species produced at the interface is NiSi, which is produced by the spontaneous formation of strong bonds between Ni and Si atoms. Assuming that a Ni layer is formed over a NiSi layer with the total coverage as a constraint, we established a chemical shift-related concentration model that, in effect, represents a practical method for determining the amount of ultrathin Ni silicides that are produced at the buried interface. The formation of Ag-Si particles provide a viable strategy for enhancing silicide formation via a specific interaction transfer mechanism, even at room temperature. The mechanism is related to differences in the enthalpies of formation ΔHAg-Si, ΔHNi-Ag, and ΔHNi-Si, for these phases and provides insights into strategies for producing ultrathin silicides at a buried interface.

Sharpness-induced energy shifts of quantum well states in Pb islands on Cu(111).

We elucidate that the tip sharpness in scanning tunneling microscopy (STM) can be characterized through the number of field-emission (FE) resonances. A higher number of FE resonances indicates higher sharpness. We observe empty quantum well (QW) states in Pb islands on Cu(111) under different tip sharpness levels. We found that QW states observed by sharper tips always had lower energies, revealing negative energy shifts. This sharpness-induced energy shift originates from an inhomogeneous electric field in the STM gap. An increase in sharpness increases the electric field inhomogeneity, that is, enhances the electric field near the tip apex, but weakens the electric field near the sample. As a result, higher sharpness can increase the electronic phase in vacuum, causing the lowering of QW state energies. Moreover, the behaviors of negative energy shift as a function of state energy are entirely different for Pb islands with a thickness of two and nine atomic layers. This thickness-dependent behavior results from the electrostatic force in the STM gap decreasing with increasing tip sharpness. The variation of the phase contributed from the expansion deformation induced by the electrostatic force in a nine-layer Pb island is significantly greater, sufficient to effectively negate the increase of electronic phase in vacuum.

Field enhancement factors and self-focus functions manifesting in field emission resonances in scanning tunneling microscopy.

Field emission (FE) resonance (or Gundlach oscillation) in scanning tunneling microscopy (STM) is a phenomenon in which the FE electrons emitted from the microscope tip couple into the quantized standing-wave states within the STM tunneling gap. Although the occurrence of FE resonance peaks can be semi-quantitatively described using the triangular potential well model, it cannot explain the experimental observation that the number of resonance peaks may change under the same emission current. This study demonstrates that the aforementioned variation can be adequately explained by introducing a field enhancement factor that is related to the local electric field at the tip apex. The peak number of FE resonances increases with the field enhancement factor. The peak intensity of the FE resonance on the reconstructed Au(111) surface varies in the face-center cubic, hexagonal-close-packed, and ridge regions, thus providing the contrast in the mapping through FE resonances. The mapping contrast is demonstrated to be nearly independent of the tip-sample distance, implying that the FE electron beam is not divergent because of a self-focus function intrinsically involved in the STM configuration.

Scanning tunneling microscopy/spectroscopy of picene thin films formed on Ag(111).

Using ultrahigh-vacuum low-temperature scanning tunneling microscopy and spectroscopy combined with first principles density functional theory calculations, we have investigated structural and electronic properties of pristine and potassium (K)-deposited picene thin films formed in situ on a Ag(111) substrate. At low coverages, the molecules are uniformly distributed with the long axis aligned along the [112̄] direction of the substrate. At higher coverages, ordered structures composed of monolayer molecules are observed, one of which is a monolayer with tilted and flat-lying molecules resembling a (11̄0) plane of the bulk crystalline picene. Between the molecules and the substrate, the van der Waals interaction is dominant with negligible hybridization between their electronic states; a conclusion that contrasts with the chemisorption exhibited by pentacene molecules on the same substrate. We also observed a monolayer picene thin film in which all molecules were standing to form an intermolecular π stacking. Two-dimensional delocalized electronic states are found on the K-deposited π stacking structure.

Estimating Young's modulus of graphene with Raman scattering enhanced by micrometer tip.

We demonstrate that the Raman intensities of G and 2D bands of a suspended graphene can be enhanced using a gold tip with an apex size of 2.3 µm. The enhancement decays with the tip-graphene distance exponentially and remains detectable at a distance of 1.5 µm. Raman mappings show that the enhanced area is comparable to the apex size. Application of a bias voltage to the tip can attract the graphene so that Raman signals are intensified. The exponential enhancement-distance relationship enables the measurement of the graphene deformation, and the Young's modulus of graphene is estimated to be 1.48 TPa.

A direct and polymer-free method for transferring graphene grown by chemical vapor deposition to any substrate.

We demonstrate a polymer-free method that can routinely transfer relatively large-area graphene to any substrate with advanced electrical properties and superior atomic and chemical structures as compared to the graphene sheets transferred with conventional polymer-assisted methods. The graphene films that are transferred with polymer-free method show high electrical conductance and excellent optical transmittance. Raman spectroscopy and X-ray/ultraviolet photoelectron spectroscopy also confirm the presence of high quality graphene sheets with little contamination after transfer. Atom-resolved images can be obtained using scanning tunneling microscope on as-transferred graphene sheets without additional cleaning process. The mobility of the polymer-free graphene monolayer is as high as 63,000 cm(2) V(-1) s(-1), which is 50% higher than the similar sample transferred with the conventional method. More importantly, this method allows us to place graphene directly on top of devices made of soft materials, such as organic and polymeric thin films, which widens the applications of graphene in soft electronics.