Prosaposin variants in sporadic, familial, and early-onset Parkinson's disease: a Taiwanese case-control study and meta-analysis.

Polymorphisms in the PSAP gene, which encodes prosaposin and is involved in the lysosomal function, yielded conflicting results regarding the association with Parkinson's disease (PD). Therefore, this study aims to investigate the role of PSAP in familial PD (FPD), early onset PD (EOPD) with age at onset before 50 years old, and sporadic PD (SPD) among Taiwanese population, and summarize relevant studies via meta-analysis. By sequencing exon 1 to 14 in 183 FPD and 219 EOPD, two novel exonic variants were found in EOPD, including p.A146E (c.437C > A) on exon 5 and p.Y248C (c.743A > G) on exon 7. Furthermore, four previously reported intronic variants (rs142614739/rs74733861), rs749823, rs4747203 and rs885828) in intron 11 and 12 were analyzed in 485 SPD and 712 in-hospital controls, in addition to the aforementioned FPD and EOPD groups. The adjusted odd ratios (ORs) by age and sex, only rs142614739 was significantly associated with higher risk of EOPD (OR = 1.85, 95% CI = 1.33-2.58). The risk effect was further confirmed by the meta-analysis of the association between rs142614739 and the risk of PD in both common effect (OR = 1.29, 95% CI = 1.11-1.50) and random effect (OR = 1.29, 95% CI = 1.11-1.50). Our findings suggest that the PSAP rs142614739 variant is associated with the risk of EOPD. Further functional studies are warranted to elucidate the biochemical mechanisms.

[Processing Magnoliae Officinalis Cortex with ginger juice: process optimization based on AHP-CRITIC weighting method and composition changes after processing].

The weight coefficients of appearance traits, extract yield of standard decoction, and total content of honokiol and magnolol were determined by analytic hierarchy process(AHP), criteria importance though intercrieria correlation(CRITIC), and AHP-CRITIC weighting method, and the comprehensive scores were calculated. The effects of ginger juice dosage, moistening time, proces-sing temperature, and processing time on the quality of Magnoliae Officinalis Cortex(MOC) were investigated, and Box-Behnken design was employed to optimize the process parameters. To reveal the processing mechanism, MOC, ginger juice-processed Magnoliae Officinalis Cortex(GMOC), and water-processed Magnoliae Officinalis Cortex(WMOC) were compared. The results showed that the weight coefficients of the appearance traits, extract yield of standard decoction, and total content of honokiol and magnolol determined by AHP-CRITIC weighting method were 0.134, 0.287, and 0.579, respectively. The optimal processing parameters of GMOC were ginger juice dosage of 8%, moistening time of 120 min, and processing at 100 ℃ for 7 min. The content of syringoside and magnolflorine in MOC decreased after processing, and the content of honokiol and magnolol followed the trend of GMOC>MOC>WMOC, which suggested that the change in clinical efficacy of MOC after processing was associated with the changes of chemical composition. The optimized processing technology is stable and feasible and provides references for the modern production and processing of MOC.

Development of Block Copolymers with Poly(3-hexylthiophene) Segments as Compatibilizers in Non-Fullerene Organic Solar Cells.

Poly(3-hexylthiophene) (P3HT)-segment-based block copolymers have been reported to deliver an effective compatibilizer function in the P3HT:PC61BM bulk-heterojunction (BHJ) system to simultaneously improve performance and stability. However, as limited by the deficient optophysic properties of the P3HT:PC61BM system, the resultant power conversion efficiency (PCE) of compatibilizer-mediated devices is low despite the optimized chemical structures of the P3HT-segment-based block copolymers. To better shed light on such a compatibilizer effect, the compatibilizer function of the P3HT-segment-based block copolymers is herein investigated in the emerging non-fullerene acceptor (NFA)-based BHJ systems. A P3HT analogue, poly[(4,4'-bis(2-butyloctoxycarbonyl-[2,2'-bithiophene]-5,5-diyl)-alt-(2,2'-bithiophene-5,5'-diyl))] (PDCBT), is used as the polymer donor since it shares the same backbone as P3HT to afford good compatibility with the P3HT-segment-based block copolymers and it has been proven to deliver a higher PCE than P3HT in the NFA BHJ systems. The P3HT-segment-based block copolymers (P1-P4) are manifested to offer similar compatibilizer functions for the PDCBT-based NFA BHJ systems, and the importance of their structural design is also revealed. As a result, addition of P4 delivers the largest enhancement in PCE: from 5.30 to 7.11% for the PDCBT:ITIC blend and from 6.21 to 8.04% for the PDCBT:IT-M blend. Moreover, it can also enhance the device's thermal stability, which can maintain 77% of the initial PCE after annealing at 85 °C for 120 h (for the PDCBT:ITIC blend), outperforming the pristine binary device (66% preservation). More importantly, the entire compatibilizer-mediated device exhibits an improved Voc. Such reduced potential loss can be attributed to the improved interfacial compatibility between the photoactive components, the most important function of a compatibilizer.

Stable, color-tunable 2D SCN-based perovskites: revealing the critical influence of an asymmetric pseudo-halide on constituent ions.

Two-dimensional (2D) layered perovskites (An+1BnX3n+1, n = 1, 2, …) have recently attracted significant research interest because of their enhanced ambient stability compared to their conventional 3D counterparts. In addition to the common A-site cation engineering, using an asymmetric pseudo-halide anion, SCN-, in the anion X-site has been recently proven to be another effective approach to constitute 2D perovskites. Among these, 2D (MA)2Pb(SCN)2I2 was the most widely investigated and was considered to be a promising material owing to its good optoelectronic properties; however, its poor stability has aroused concerns in recent researches. In this study, systematical composition engineering of A2Pb(SCN)2X2 (A = FA+, MA+, Cs+ and X = Br-, I-) was conducted. Our results revealed that the linear SCN- anion dictates critical restrictions on the constituent ions of its derived 2D framework (PbX4(SCN)2), which has not yet been extensively discussed. We demonstrated that using a smaller Cs+ cation can afford a more favorable 2D structure compared with the MA+ cation. Cs2Pb(SCN)2I2 was revealed to possess improved stability and photo-response compared to (MA)2Pb(SCN)2I2. Interestingly, Cs2Pb(SCN)2I2 and (MA)2Pb(SCN)2I2 appear to possess distinct electronic band structures. This is indicated by their discrepant photoluminescence spectra, in which the former exhibits a rather intense singlet emission at room temperature in contrast with the latter, which shows a dominant emission associated with triplet or defective states. Furthermore, using a smaller Cs+ cation enables facile replacement of a smaller halide anion. A series of mixed-halide 2D Cs2Pb(SCN)2(I1-xBrx)2 (x = 0, 1/3, 1/2, 2/3, 1) with varying vivid colors was explored by both calculation and experimental efforts to corroborate the enhanced stability when the x value increases. The results revealed in this study might represent a novel discovery of an inherent trait of the 2D SCN-based perovskites and also suggest that the all-inorganic 2D Cs2Pb(SCN)2X2 perovskite system is a promising class of materials with good stability and color-tunability that deserves further exploration.

Insights into the Morphological Instability of Bulk Heterojunction PTB7-Th/PCBM Solar Cells upon High-Temperature Aging.

The impact of the morphological stability of the donor/acceptor mixture under thermal stress on the photovoltaic properties of bulk heterojunction (BHJ) solar cells based on the poly[4,8-bis(5-(2-ethylhexyl)thiophen-2-yl)benzo[1,2-b;4,5-b']-dithiophene-2,6-diyl-alt-(4-(2-ethylhexyl)-3-fluorothieno[3,4-b]-thiophene)-2-carboxylate-2,6-diyl]/phenyl-C61-butyric acid methyl ester (PTB7-Th/PC61BM) blend is extensively investigated. Both optical microscopy and transmission electron microscopy micrographs show that long-term high-temperature aging stimulates the formation of microscale clusters, the size of which, however, is about 1 order of magnitude smaller than those observed in thermally annealed poly(3-hexylthiophene)/PC61BM composite film. The multilength-scale evolution of the morphology of PTB7-Th/PC61BM film from the scattering profiles of grazing incidence small-angle and wide-angle X-ray scattering indicates the PC61BM molecules spatially confine the self-organization of polymer chains into large domains during cast drying and upon thermal activation. Moreover, some PC61BM molecules accumulate into ∼30-40 nm clusters, the number of which increases with heating time. Therefore, the hole mobility in the active layer decays much more rapidly than the electron mobility, leading to unbalanced charge transport and degraded cell performance. Importantly, the three-component blend that is formed by replacing a small amount of PC61BM in the active layer with the bis-adduct of PC61BM (bis-PC61BM) exhibits robust morphology against thermal stress. Accordingly, the PTB7-Th/PC61BM:bis-PC61BM (8 wt %) device has an extremely stable power conversion efficiency.

Thermo-responsive nanoarrays of silver nanoparticle, silicate nanoplatelet and PNiPAAm for the antimicrobial applications.

The ternary nanohybrids of silver nanoparticles (AgNPs) in combination with silicate nanoplatelets (NSP) and thermally sensitive poly(N-isopropylacrylamide) (PNiPAAm) were fabricated for antibacterial applications. PNiPAAm were chemically grafted on the NSP by atom-transfer radical polymerization (ATRP) via polymerizing N-isopropylacrylamide monomers with sol-gel linkers (BBTES). The nanoparticles of AgNPs then were adsorbed on NSP-PNiPAAm nanosheets through in situ reduction reaction of AgNO3 in aqueous dispersion. The particle sizes of AgNPs were estimated to be 7-12nm in diameter with different composition ratios of AgNPs to NSP-PNiPAAm, evaluated by transmission electron microscope (TEM). The nanohybrids of AgNP/NSP-PNiPAAm exhibited the unique property of lowest critical solution temperature (LCST) at 32°C. The thermo-responsive antibacterial efficacy of the ternary nanohybrids was demonstrated by Bacillus subtilis (B. subtilis) and Escherichia coli (E. coli) at lower than the LCST (28°C) and higher than the LCST (37°C). The result show that the great antibacterial ability was observed in the hydrophilic bacteria (B. subtilis) at 28°C. In contrast, the excellent antibacterial ability was found in the hydrophobic bacteria (E. coli) at 37°C, due to the surface energy modulation of AgNP/NSP-PNiPAAm. The tailoring of silver-containing ternary nanohybrids allow the new antibacterial nanomaterials to selectively affect the surface of bacteria by varying temperature.

Au Nanoparticles Immobilized on Honeycomb-Like Polymeric Films for Surface-Enhanced Raman Scattering (SERS) Detection.

We have successfully developed novel surface-enhanced Raman scattering (SERS) substrates with three-dimensional (3D) porous structures for effectively improving the sensitivity and reproducibility of SERS, which can rapidly detect small molecules (rhodamine 6G as an example). Periodical arrays of the honeycomb-like substrates were fabricated by self-assembling polyurethane-co-azetidine-2,4-dione (PU-PAZ) polymers. PU-PAZ comprising amphiphilic dendrons could stabilize the phase separation between the water droplets and polymer solution, and then organize into regular porous structures during the breath figure method. Subsequently, SERS substrates were fabricated by immobilizing gold nanoparticles (AuNPs) onto the honeycomb-like films with various 3D porous structures, controlled by the different PU-PAZ concentrations and relative humidities. Results show that surface enhancement factors of honeycomb-like substrates were 20 times higher than that of flat-film substrates (control group) due to enormous hot-spots resonance effects by the 3D porous structure, verified through Raman mapping at various positions of the z-axis. Furthermore, the particle size effects were evaluated by immobilized 12 and 67 nm of AuNPs on the honeycomb-like substrates, indicating larger AuNPs could induce more pronounced hot-spots effects. The generation of hot-spots resonance to enhance Raman intensity is strongly dependent on the diameter of AuNPs and the pore size of the honeycomb-like and 3D porous substrates for label-free and rapid SERS detection.

MoS2-Gd Chelate Magnetic Nanomaterials with Core-Shell Structure Used as Contrast Agents in in Vivo Magnetic Resonance Imaging.

Despite their frequent usages as contrast agents for in vivo MRI imaging, paramagnetic molecules continue to suffer from low resolution, physicochemical instability, and high toxicity. Herein, we present a molybdenum disulfide and gadolinium complex, as an alternative core-shell magnetic nanomaterial that exhibits enhanced paramagnetic property; 4.5-times longer water proton spin-lattice relaxation time (T1) when compared to commercial gadolinium contrast agents; as well as lowered toxicity, extended blood circulation time, increased stability, and desirable excretion characteristic. Transmission electron microscopy (TEM) revealed smooth core-shell nanoparticles 100 nm in size with a shell width of approximately 10 nm. These findings suggest that the synthesized nanomaterial possesses high potential as a positive contrast agent for the enhancement of MRI imaging.

Fabrication of Gold Nanoparticles/Graphene-PDDA Nanohybrids for Bio-detection by SERS Nanotechnology.

In this research, graphene nanosheets were functionalized with cationic poly (diallyldimethylammonium chloride) (PDDA) and citrate-capped gold nanoparticles (AuNPs) for surface-enhanced Raman scattering (SERS) bio-detection application. AuNPs were synthesized by the traditional citrate thermal reduction method and then adsorbed onto graphene-PDDA nanohybrid sheets with electrostatic interaction. The nanohybrids were subject to characterization including X-ray diffraction (XRD), transmission electron microscopy (TEM), zeta potential, and X-ray photoelectron spectroscopy (XPS). The results showed that the diameter of AuNPs is about 15-20 nm immobilized on the graphene-PDDA sheets, and the zeta potential of various AuNPs/graphene-PDDA ratio is 7.7-38.4 mV. Furthermore, the resulting nanohybrids of AuNPs/graphene-PDDA were used for SERS detection of small molecules (adenine) and microorganisms (Staphylococcus aureus), by varying the ratios between AuNPs and graphene-PDDA. AuNPs/graphene-PDDA in the ratio of AuNPs/graphene-PDDA = 4:1 exhibited the strongest SERS signal in SERS detection of adenine and S. aureus. Thus, it is promising in the application of rapid and label-free bio-detection of bacteria or tumor cells.

Poly(N-isopropylacrylamide)-tethered silicate platelets for colloidal dispersion of conjugated polymers with thermoresponsive and photoluminescence properties.

Poly(N-isopropylacrylamide)-tethered nanosilicate platelets (NSP-PNiPAAm) have been synthesized by covalently bonding the polymer onto the surfaces of silicate platelets of nanometer dimension, and this class of nanohybrids has proved to be effective for dispersing water-insoluble conjugated polymers (CPs). Simple pulverization of poly[2-methoxy-5-(2'-ethylhexyloxy)-1,4-phenylenevinylene] (MEH-PPV) with NSP-PNiPAAm rendered the powder material dispersible in water, whereupon it displayed thermoresponsive properties at 37.5 degrees C and CP particle size variation between ca. 50 and 100 nm by SEM observation. The same dispersion had a maximum UV-vis absorption at 524 nm and PL emission at 605 nm. The PL emission was significantly higher at 4 degrees C than at 45 degrees C. Being coated as a film, it showed an orange emission under an ultraviolet lamp, consistent with the PL measurement. The water-borne process of dispersing the CP in aqueous media by the presence of NSP-PNiPAAm and followed by film formation to demonstrate a unique method of manipulating hydrophobic conjugated polymers in a facile manner.